Ubiquiti UniFi G3 PRO Bedienungsanleitung

1080p Indoor/Outdoor

IP Camera with Infrared

Model: UVC-G3

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi® Video

Camera G3. This Quick Start Guide is designed to guide you

through installation and also includes warranty terms.

Package Contents

UVC-G3 PoE Adapter (24V, 0.5A)

with Mounting Bracket*

Power Cord*

Cable Gland Screw Anchors

(Qty. 2, 8 x 40 mm)

Self-Tapping Screws

(Qty. 2, M4 x 30)

1080pFHD Indoor/Outdoor

SurveillanceCamera with

Built-InInfrared

Model:UVC-G3

Pole Mount

Bracket

Machine Screws

(Qty. 2, M4x10)

Quick Start

Guide

* Only the single-pack of the UVC-G3 includes a PoE adapter and a

power cord.

Installation Requirements

• Shielded Category 5 (or above) cabling should be used for

all wired Ethernet connections and should be grounded

through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit

www.ubnt.com/toughcable

cable and earth grounding must be used for outdoor installations as conditions of product

warranty. TOUGHCable™ is designed for outdoor installations. It is the customer’s responsibility

to follow local country regulations.

Hardware Overview

24V 0.5A PoE

M/N: UVC-G3

RESET

Mounting Base

Cable Gland

Tilt/Mount Lock

Adjustable Base

Camera Lock

Camera Lens

IR LED

Ethernet

Reset

Ethernet Connects to the Ubiquiti PoE adapter or UniFi

Switch for 24V passive PoE power and data.

Reset To reset to factory defaults, press and hold the Reset

button for more than 10 seconds while the camera is already

poweredon.

Hardware Installation

The UniFi Video Camera G3 can be mounted on a wall, ceiling,

or pole. Follow the appropriate steps for your installation:

Wall/Ceiling Mount

1. Remove the Mounting Base from the camera by turning the

Tilt/Mount Lock counterclockwise.

2. Mark the mounting holes on the wall or ceiling.

Cable

Slot

Note: If you are running the cable along the wall or

ceiling, ensure that you position the Cable Slot towards

the direction you want the cabling to run.

3. Use a 7 mm drill bit to drill the mounting holes in the wall

or ceiling.

Note: If

you are running the Ethernet cable through

the wall, cut a hole centered between the mounting

holes that is large enough to feed the cable through.

4. Insert a Screw Anchor into each mounting hole.

5. If you are feeding the Ethernet cable through the wall or

ceiling, do so now and feed it through the Mounting Base.

If not, feed the Ethernet cable through the Mounting Base

and place the cable in the Cable Slot.

6. Fasten the Mounting Base to the wall or ceiling using two

Self-Tapping Screws.

7. Remove the camera from the Adjustable Base by turning

the Camera Lock counterclockwise.

8. Feed the Ethernet cable through the Cable Gland and

Adjustable Base. Then connect the cable to the Ethernet Port

on the camera.

M/N:UVC-G3 24V 0.5A PoE

RESET

9. Connect the camera back to the Adjustable Base by turning

the Camera Lock clockwise.

10. Set the pan angle of the Adjustable Base while connecting

it to the Mounting Base. Then lock the camera to the

Mounting Base by turning the Tilt/Mount Lock clockwise.

Pole Mount

To mount the UVC-G3 on a pole, a metal strap or hose clamp is

required (not included).

1. Feed the metal strap through the slots on the Pole Mount

Bracket.

2. Wrap the metal strap around the pole and tighten the strap

by turning the screw clockwise.

3. Remove the Mounting Base from the camera by turning the

Tilt/Mount Lock counterclockwise.

Andere Handbücher für UniFi G3 PRO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ubiquiti Sicherheitskamera Handbücher

Ubiquiti

Ubiquiti UVC--G4--BULLET Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-Dome Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-G3-BULLET Bedienungsanleitung

Ubiquiti

Ubiquiti airCAM DOME Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-G3-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti airCAM DOME Bedienungsanleitung

Ubiquiti

Ubiquiti airCam MINI Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Protect UVC-G3-Flex-3 Bedienungsanleitung

Ubiquiti

Ubiquiti UVC G3 Gebrauchsanweisung

Ubiquiti

Ubiquiti airCam Bedienungsanleitung

Ubiquiti

Ubiquiti airCam Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi G3 PRO Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-G3-DOME Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UVC-G4-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti G3 Micro Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-G3-AF Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UVC-G4-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Protect Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi G3 Dome Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UVC-G4-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-G3-DOME-3 Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-G3-MICRO Bedienungsanleitung

Ubiquiti

Ubiquiti airCam Bedienungsanleitung

Ubiquiti

Ubiquiti UVC-G3-BULLET Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung