Ubiquiti ES-10X Bedienungsanleitung

EdgeSwitch10X WallMountScrews(Qty.2) WallMountAnchors(Qty.2)

GroundScrew PowerAdapter(24V,1A) CableClip

PackageContents

InstallationRequirements

Wall-mounting(optional)

Drillwith6mmdrillbit

Phillipsscrewdriver

Forindoorapplications,useCategory5(orabove)UTPcablingapprovedforindoor

use.

Foroutdoorapplications,shieldedCategory5(orabove)cablingshouldbeusedfor

allwiredEthernetconnectionsandshouldbegroundedthroughtheACgroundofthe

powersupply.

Werecommendthatyouprotectyournetworksfromharmfuloutdoorenvironments

anddestructiveESDeventswithindustrial-grade,shieldedEthernetcablefrom

Ubiquiti.Formoredetails,visit:ui.com/toughcable

Note:Althoughthecablingcanbelocatedoutdoors,theEdgeSwitchitself

shouldbehousedinsideaprotectiveenclosure.

HardwareOverview

ES-10XQuickStartGuide

SystemLED

RJ45Speed/Link/ActivityLED(Ports1-8)

SFPLink/ActivityLED(Ports9-10)

RJ45(Ports1-8)

SFP(Ports9-10)

ResetButton

Power

GroundingPoint

FlashingWhite BootupinProgress

White

ReadyforUse

NotConnectedtoUbiquiti®NetworkManagement

System(UNMS™)

Blue

ReadyforUse

ConnectedtoUNMS

SteadyBluewith

OccasionalFlashing

ReadyforUse

UnabletoConnecttoUNMS

QuicklyFlashingBlue UsedtoLocateaDeviceinUNMS

AlternatingBlue/White FirmwareUpgradeinProgress

Off NoLink

Amber

LinkEstablishedat10/100Mbps

FlashingIndicatesActivity

Green

LinkEstablishedat1000Mbps

FlashingIndicatesActivity

Off NoLink

Green

LinkEstablishedat1Gbps

FlashingIndicatesActivity

RJ45portssupport10/100/1000Ethernetconnections.

PoEIn(Port1)Supports24VPassivePoEinput.

PoEOut(Port8)Supports24VPassivePoEpassthrough.

Hot-swappableSFPportssupport1Gbpsconnections.IfyouuseacopperEthernet

module(example:UF-RJ45-1G),powerofftheEdgeSwitchbeforeinsertion;

otherwisetheremaybeadevicereboot.

Toresettofactorydefaults:

1. DisconnectpowerfromtheEdgeSwitch.

2. ReconnectpowerwhileholdingtheResetbutton.TheportLEDswilllightupin

sequentialorder(thistakesapproximatelyfiveseconds).

3. Whentheport1LEDflashesagain,releasetheResetbutton.

ConnecttheincludedPowerAdaptertothePowerport.

Groundbondingpointforanoptionalgroundwire.

HardwareInstallation

TheoptionalEdgeRouter™RackmountKit,modelER-RMKIT,issoldseparately.

WARNING:TheEdgeSwitchES-10Xmustnotbestacked.Donotplaceiton

topofanotherswitch.DonotplaceanythingontopoftheES-10X.

WallMounting

1.

2.

3.

4.

GroundingtheEdgeSwitch(Recommended)

ThePowerAdaptergroundsthedevice;however,youcanaddoptionalESDgrounding

forenhancedESDprotection(groundwirenotincluded).

Optional

ConnectingPower

Note:Onlyonepowersourcecanbeusedatanyonetime.Withbothpower

sourcesconnected,theinputwiththehighestvoltagewillbeused;theother

powersourcedefaultstobackup.

ConnectingEthernet

1.

2.

WARNING:BeforeenablingPoEpassthrough,ensurethattheconnectedPoE

devicesupports24VPassivePoE.

UsingSFPPorts

1.

2.

3.

ForinformationaboutcompatiblefiberSFPmodules,visit:

ubnt.link/SFP_DAC_Compatibility

AccessingtheConfigurationInterface

ThedeviceissettoDHCPbydefault,soitwilltrytoautomaticallyobtainanIPaddress.

Ifthatfails,thenitwillusethedefaultfallbackIPaddress,192.168.1.20.Proceedtothe

appropriatesection,DHCPor“FallbackIPAddress”:

DHCP

Useoneofthefollowingmethods:

SetuptheDHCPservertoprovideaspecificIPaddresstothedevicebasedonits

MACaddress(onthelabel).

LetthedeviceobtainanIPaddressandthenchecktheDHCPservertoseewhichIP

addresswasassigned.

Tologin,followthesesteps:

1. Launchyourwebbrowser.TypetheappropriateIPaddressintheaddressfield.

Pressenter(PC)orreturn(Mac).

2. EnterubntintheUsernameandPasswordfields.ClickSignIn.

TheEdgeSwitchConfigurationInterfacewillappear.Customizeadditionalsettingsas

needed.For24VPassivePoEconfiguration,referto“ConfiguringPoESettings”.For

moreinformation,refertotheEdgeSwitchdocumentation,whichisavailableat

ui.com/download/edgemax

FallbackIPAddress

1. Ensurethatyourcomputer(orotherhostsystem)isconnectedtothedevice.

2. ConfiguretheEthernetadapteronyourhostsystemwithastaticIPaddressonthe

192.168.1.xsubnet.

3. Launchyourwebbrowser.TypetheappropriateIPaddressintheaddressfield

(192.168.1.20isthedefaultfallbackIPaddress).Pressenter(PC)orreturn(Mac).

4. EnterubntintheUsernameandPasswordfields.ClickSignIn.

5. TheEdgeSwitchConfigurationInterfacewillappear.ClicktheSystemSettingstab.

6. ChangetheIPAddresstoauniqueIPaddress.ClickApply.

Note:IfyouchangetheIPsettings,thenthesessionwillbecutoff,andyouwill

needtoreconnecttothedeviceusingthenewIPaddress.

Customizeadditionalsettingsasneeded.For24VPassivePoEconfiguration,referto

“ConfiguringPoESettings”.Formoreinformation,refertotheEdgeSwitch

documentation,whichisavailableatui.com/download/edgemax

ConfiguringPoESettings

ThePoEsettingforport8issettoOffbydefault.

WARNING:BeforeactivatingPoE,ensurethattheconnecteddevicesupports

passivePoEandthesuppliedvoltage.

OntheDashboardtab,clickthePoEsettingofport8.Thenselect24V.

UNMSManagement

YoucanmanageyourdeviceusingUNMS,whichletsyouconfigure,monitor,upgrade,

andbackupyourdevicesusingasingleapplication.Getstartedatwww.unms.com

Specifications

ES-10X

Dimensions 207x31.1x90mm(8.15x1.22x3.54")

Weight 500g(1.10lb)

TotalNon-BlockingThroughput 10Gbps

SwitchingCapacity 20Gbps

ForwardingRate 14.88Mpps

Max.PowerConsumption

(ExcludingPoEOutput)

PowerMethod 24VDC,1Aor

24VPassivePoE

SupportedVoltageRange 9-30VDC

PowerSupply 24VDC,1APowerAdapter(Included)or

24VPassivePoE

LEDs 

System Status

RJ45DataPorts Link/Speed/Activity

SFPDataPorts Link/Activity

NetworkingInterfaces (8)10/100/1000MbpsRJ45Ports

(2)1GbpsSFPPorts

ManagementInterface EthernetIn-Band

Certifications CE,FCC,IC

ESD/EMPProtection Air:±24kV,Contact:±24kV

OperatingTemperature -10to50°C(14to122°F)

OperatingHumidity 5to95%Noncondensing

ShockandVibration ETSI300-019-1.4Standard

PoE(Port8)

PoEInterface 24VDCPassivePoE(Pins4,5+;7,8-)

Max.PassivePoEWattageperPort 15W

24VPassivePoEVoltageRange 24V

Andere Handbücher für ES-10X

Inhaltsverzeichnis

Andere Ubiquiti Schalten Handbücher

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 5XP Bedienungsanleitung

Ubiquiti

Ubiquiti UA-Hub Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch ES-10XP Leitfaden

Ubiquiti

Ubiquiti UniFi USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 5XP Bedienungsanleitung

Ubiquiti

Ubiquiti USW-24 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch 24 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti UBNT-US-8-150W-US Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-24-POE Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti ES-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgePoint EP-S16 Bedienungsanleitung

Ubiquiti

Ubiquiti USW-24 Bedienungsanleitung

Ubiquiti

Ubiquiti unifi switch 8 Bedienungsanleitung

Ubiquiti

Ubiquiti USW-48-POE Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Pro-48-POE Bedienungsanleitung

Ubiquiti

Ubiquiti 0810354023262 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-24-POE Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung