Ubiquiti UniFi US-24-500W Bedienungsanleitung

Managed PoE+ Gigabit

Switch with SFP

Models: US-24-250W, US-24-500W

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®

Switch with SFP. The UniFi Controller software and User Guide

are available for download at: downloads.ubnt.com/unifi

This Quick Start Guide is designed to guide you through the

installation and show you how to access the Configuration

Interface. This Quick Start Guide also includes the warranty

terms, and is for use with the UniFi Switch with SFP,

modelUS‑24‑250W or US‑24‑500W. (The hardware description

and installation instructions are the same for both models.)

Package Contents

UniFi Switch

ManagedPoE+ Gigabit

Switchwith SFP

Models:US-24-250W, US-24-500W

Power Cord Mounting Screws

(#10‑32 x 5/8", Qty. 4)

Cage Nuts

(#10‑32 x 5/8", Qty. 4)

Quick Start

Guide

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8

• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft

Internet Explorer 8 (or above)

responsibility to follow local country regulations and indoor cabling requirements.

Network Topology Requirements

• A DHCP‑enabled network for the UniFi Switch to obtain an

IPaddress (connected devices will also obtain IP addresses

after deployment)

• A management station running the UniFi Controller

software, located either on‑site and connected to the same

Layer2 network, or off‑site in a cloud or NOC

UniFi Switch

UniFi

Security

Gateway

Internet

UAP-AC UAP-PRO

LAN

WAN

O-Site

Cloud/NOC

On-Site

Management

Station

NetworkHealth

www WAN LAN

WLAN

VOIP

www WAN LAN WLAN VOIP

DNS

GATEWAY

ACTIVECLIENTS

DOWN

SWITCHES

USERS

GUESTS

DOWN

APS

USERS

GUESTS

DOWN

PHONES

EXTENSION

CALLSIN

CALLSOUT

XXX.XXX.XXX.XXX

XXX.XXX.XXX.XXX 192

162

DASHBOARD

MAP

DEVICES

CLIENTS

CALLS

STATISTICS

INSIGHTS

SETTINGS

CURRENTSITE

Default

REFRESHRATE

2minutes

NetworkHealth

www WAN LAN

WLAN

VOIP

www WAN LAN WLAN VOIP

DNS

GATEWAY

ACTIVECLIENTS

DOWN

SWITCHES

USERS

GUESTS

DOWN

APS

USERS

GUESTS

DOWN

PHONES

EXTENSION

CALLSIN

CALLSOUT

XXX.XXX.XXX.XXX

XXX.XXX.XXX.XXX 192

162

DASHBOARD

MAP

DEVICES

CLIENTS

CALLS

STATISTICS

INSIGHTS

SETTINGS

CURRENTSITE

Default

REFRESHRATE

2minutes

UAP-Outdoor+

Sample Network Diagram

All UniFi devices support off‑site management controllers.

For setup details, refer to the User Guide on the website:

documentation.ubnt.com/unifi

Hardware Overview

Front Panel System LED

System

State Status

White Factory defaults, waiting for integration.

Flashing White Initializing.

Alternating

White/Blue

Device is busy; do not use or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Blue Successfully integrated into a network

and working properly.

Flashing Blue

This is used to locate a device.

When you click Locate in the UniFi

Controller software, the System LED

will flash blue. The software will also

display the location of the UniFi Switch

on the map.

Front Panel Port LEDs

RJ45: PoE RJ45: Speed/Link/Act

SFP: Speed/Link/Act

LED State Status

RJ45 1‑24

PoE

Off No PoE

Amber IEEE 802.3af/802.3at

Green 24V Passive

Speed/

Link/

Act

Off No Link

Amber

Link Established at

10/100Mbps

Flashing Indicates Activity

Green

Link Established at

1000Mbps

Flashing Indicates Activity

SFP 1‑2

Speed/

Link/

Act

Off No Link

Green Link Established at 1Gbps

Flashing Indicates Activity

Front Panel Ports

RJ45 1-24 SFP 1-2

Port Description

RJ45 1‑24 RJ45 ports support Power over Ethernet (PoE)

and 10/100/1000 Ethernet connections.

SFP 1‑2 Hot‑swappable SFP ports support 1 Gbps

connections.

Front Panel Button

Reset

Button Description

Reset

This button serves two functions for the

UniFi Switch:

• Restart Press and release the Reset

button quickly.

• Restore to Factory Default

Settings Press and hold the Reset button

for more than five seconds.

*640-00083-02*

640-00083-02

Back Panel

CONSOLE

Mounting Holes

Power

Mounting Holes

Console

Port Description

Console

RJ45 serial console port for Command

Line Interface (CLI) management. Use an

RJ45‑to‑DB9, serial console cable, also

known as a rollover cable, to connect

the Console port to your computer. Then

configure the following settings as needed:

• Baud rate 115200

• Data bits 8

• Parity NONE

• Stop bits 1

• Flow control NONE

Note: There are fans and ventilation holes on the sides of

the UniFi Switch.

Installation Requirements

• Phillips screwdriver

• Standard‑sized, 19" wide rack with a minimum of 1U height

available

• For indoor applications, use Category 5 (or above) UTP

cabling approved for indoor use.

• For outdoor applications, shielded Category 5 (or above)

cabling should be used for all wired Ethernet connections

and should be grounded through the AC ground of the

power supply.

We recommend that you protect your outdoor networks

from the most brutal environments and devastating ESD

attacks with industrial‑grade shielded Ethernet cable,

TOUGHCable™, from Ubiquiti Networks. For more details,

visit: www.ubnt.com/toughcable

Note: Although the cabling can be located outdoors,

the UniFi Switch itself should be housed inside a

protective enclosure.

Hardware Installation

1. Connect the Power Cord to the Power port of the

UniFiSwitch.

2. Attach the UniFi Switch to the rack using the four Mounting

Screws. (If the rack has square slots, then use the Cage Nuts

with the Mounting Screws.)

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

Note: Keep 20 mm of clearance next to the

ventilation holes for adequate airflow.

3. Connect the other end of the Power Cord to a power outlet.

Connecting Ethernet

1. Connect an Ethernet cable from your computer or host

system to any port of UniFi Switch.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

2. Connect Ethernet cables from the Ethernet ports of your

devices to the other numbered ports of the UniFi Switch.

Note: The PoE settings for ports 1-24 are set to

auto‑sensing PoE+ by default, so 802.3af/at devices

can be plugged in and automatically receive PoE. For

instructions on how to enable 24V passive PoE, refer

to the Configuring PoE Settings section.

Using SFP Ports

To use an SFP port:

1. Remove the protective plug covering the SFP port.

2. Plug a compatible fiber module into the SFP port.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

1000MbpsSM/SC 20KM DDM

Tx1550nm/Rx1310nm

3. Connect a fiber optic cable to the fiber module. Then

connect the other end of the cable to another fiber device.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

For information about compatible fiber SFP modules, visit:

community.ubnt.com/unifi

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ubiquiti Schalten Handbücher

Ubiquiti

Ubiquiti EdgeSwitch ES-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 10 XP Bedienungsanleitung

Ubiquiti

Ubiquiti unifi switch 8 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 10 XP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch 48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Pro-24-POE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch Bedienungsanleitung

Ubiquiti

Ubiquiti ES-5XP Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 48 LITE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-48-750W Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti US-24 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 48 LITE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-24-POE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-24-POE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-8-60W Bedienungsanleitung

Ubiquiti

Ubiquiti FiberPoE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-16-POE Bedienungsanleitung

Ubiquiti

Ubiquiti USW--Pro--48 Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 48 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-24-250W Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch