Ubiquiti ES-48-500W Bedienungsanleitung

EdgeSwitch

Mounting Screws (Qty. 4)

Cage Nuts (Qty. 4)

Power Cord

Package Contents

Installation Requirements

Phillips screwdriver

Standard-sized, 19" wide rack with a minimum of 1U height available

For indoor applications, use Category 5 (or above) UTP cabling approved for

indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used

for all wired Ethernet connections and should be grounded through the AC

ground of the power supply.

We recommend that you protect your networks from harmful outdoor

environments and destructive ESD events with industrial-grade, shielded Ethernet

cable from Ubiquiti. For more details, visit: ui.com/toughcable

Note: Although the cabling can be located outdoors, the EdgeSwitch

itself should be housed inside a protective enclosure.

ES-48-500W, ES-48-750W Quick Start Guide

System LED

RJ45 PoE LED (Ports 1 - 48)

Hardware Overview

Note: The System LED functionality has been updated with firmware

v1.8.0. We recommend that you update the EdgeSwitch to the latest

firmware.

Flashing White Bootup in progress.

White

Ready for use, not connected to Ubiquiti Internet

Service Provider (UISP™). See “UISP

Management”.

Blue Ready for use, connected to UISP.

Steady Blue with

Occasional Flashing

Ready for use, unable to connect to UISP, check

connection to UISP server.

Quickly Flashing Blue Used to locate a device in UISP.

Alternating

Blue/White Firmware upgrade in progress.

Off No PoE

RJ45 Speed/Link/Activity LED (Ports 1 - 48)

SFP+ Speed/Link/Activity LED (Ports 1 - 2)

SFP Speed/Link/Activity LED (Ports 1 - 2)

RJ45 (Ports 1 - 48)

SFP+ (Ports 1 - 2)

SFP (Ports 1 - 2)

Amber IEEE 802.3af/802.3at

Green 24V Passive

Off No Link

Amber

Link Established at 10/100 Mbps

Flashing Indicates Activity

Green

Link Established at 1000 Mbps (1 Gbps)

Flashing Indicates Activity

Off No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

White

Link Established at 10 Gbps

Flashing Indicates Activity

Off No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

RJ45 ports support Power over Ethernet (PoE) and 10/100/1000 Ethernet

connections.

Hot-swappable SFP+ ports support 1/10 Gbps connections.

Hot-swappable SFP ports support 1 Gbps connections.

Reset Button

Console Port

Power Port

Click here to learn how to reset an EdgeSwitch to factory defaults.

RJ45 serial console port for Command Line Interface (CLI) management.

Connect the included Power Cord to the Power port.

Hardware Installation

2. 

Connecting Ethernet

Note: The PoE settings for ports 1-48 are set to PoE+ auto by default, so

802.3af/at devices can be plugged in and automatically receive PoE. For

instructions on how to enable 24V passive PoE, refer to “Conﬁguring PoE

Settings”.

Connecting SFP+/SFP

These ports support the specified module types at the following speeds:

Ports SFP+ Module Type SFP Module Type

SFP+ 1-2 10 Gbps 1 Gbps

SFP 1-2 (Not supported) 1 Gbps

For information about compatible fiber SFP+ or SFP modules, visit:

ubnt.link/SFP_DAC_Compatibility

Accessing the Conﬁguration Interface

The EdgeSwitch is set to DHCP by default, so it will try to automatically obtain an IP

address. If that fails, then it will use the default fallback IP address, 192.168.1.2.

Proceed to the appropriate section, DHCP or “Fallback IP Address”:

DHCP

Use one of the following methods:

Set up the DHCP server to provide a specific IP address to the EdgeSwitch

based on its MAC address (on the label).

Let the EdgeSwitch obtain an IP address and then check the DHCP server to see

which IP address was assigned.

To log in, follow these steps:

1. Launch your web browser. Type the appropriate IP address in the address field.

Press enter (PC) or return (Mac).

2. Enter ubnt in the Username and Password fields. Click Sign In.

3. The EdgeSwitch Configuration Interface will appear. Customize additional

settings as needed.

For more information on PoE configuration, refer to “Conﬁguring PoE Settings”. For

more information, refer to the EdgeSwitch documentation, which is available at

ui.com/download/edgemax

Fallback IP Address

Ensure that your computer (or other host machine) is connected to the

EdgeSwitch.

2. Configure the Ethernet adapter on your host system with a static IP address on

the 192.168.1.x subnet.

3. Launch your web browser. Type the appropriate IP address in the address field

(192.168.1.2 is the default fallback IP address). Press enter (PC) or return (Mac).

4. Enter ubnt in the Username and Password fields. Click Sign In.

5. The EdgeSwitch Configuration Interface will appear. Go to Settings .

6. Change the IP Address to a unique IP address. Click Apply.

Note: If you change the IP settings, then the session will be cut off, and you

will need to reconnect to the EdgeSwitch using the new IP address.

Customize additional settings as needed. For more information on PoE

configuration, refer to “Conﬁguring PoE Settings”.

UISP Management

You can manage your device using UISP, which lets you configure, monitor,

upgrade, and back up your devices using a single application. Get started at

uisp.ui.com

Conﬁguring PoE Settings

The PoE settings for ports 1-48 are set to PoE+ by default, so 802.3af/at devices

can be plugged in and automatically receive PoE.

WARNING: Before activating 24V passive PoE, ensure that the connected

device supports PoE and the supplied voltage.

1. Go to Dashboard .

2. For the Ethernet port you want to configure, click the PoE drop-down menu.

3. Select the appropriate mode: Off, 24V, or PoE+.

For more information, refer to the EdgeSwitch documentation, which is available at

ui.com/download/edgemax

Speciﬁcations

Andere Handbücher für ES-48-500W

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ubiquiti Schalten Handbücher

Ubiquiti

Ubiquiti FiberPoE Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti ETHERMAGIC EM-S Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-8 Bedienungsanleitung

Ubiquiti

Ubiquiti UnFi US-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 8 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 48 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch ES-10XP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-16-POE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Pro-48-POE Bedienungsanleitung

Ubiquiti

Ubiquiti US-8-150W Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti POE-50-60W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 48 LITE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti unifi switch 8 Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch 48 US-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 5XP Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch 24 US-24-250W Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Industral Leitfaden

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch