Ubiquiti POE-50-60W Bedienungsanleitung

PoE injector

power input

Power cord

PoE y LAN

POE-50-60W Quick Start Guide

hardware description

Package content

Puerto

Installation

1. Connect a network cable to the PoE port on the injector and the other end to the Ubiquiti device

you want to power (see device specifications).

switch de su red local.

stream.

4. Optionally, the PoE injector can be fixed to the wall or some other surface, follow the instructions

in the following image.

2. Connect a network cable to the LAN port of the injector and the other end to the router or

3. Connect the power cord to the injector and the other end to an electrical outlet.

specs

1500A (8/20 µs) Potencia

clamping protection

LAN activity

AC connector

output voltage

<5pF data

Certifications

Puerto LAN Gigabit

rated voltage

Dimensions

reset button

bypass capacity

Input current

4 pair feeding

Storage temperature

inrush current

2 pair feeding

Pins 3, 6, 7, 8 (-)

load regulation

line regulation

192 g (6.77 ounces)

Model

Operating temperature

output ripple

operating humidity

maximum pulse current

Response time

max surge discharge

Weight

–

Yes

ÿ 3%

ÿ 5%

85+%

0 a 40 °

65kHz

° C (32 a 104 F)

difference and common mode

surge protection

<200A Pico @ 230VAC

35 to 95% non-condensing

RJ45 shielded socket

<1 ns

CEI-320 C6

°°

POE-50-60W, POE-50-60W-WH

<100A Pico @120VAC,

Efficiency

- 30 a 70 C (-22 a 158

1% max

Data entry / POE

11 V data, 60 V power

remote reset

Indicator

0,75 A a 230 V CA

change frequency

Ability

Pins 1, 2, 4, 5 (+) and

1,3 A a 120 V CA,

(3,98 x 2,36 x 1,30”)

36A (10/1000 µs) Data

101 x 60 x 33 mm

50 V CC a 1,2 A

CE, FCC, CI, UL

100-240 V CA a 50/60 Hz

2. Pay attention to all warnings.

1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer's

label. Connection to a power source other than those specified may result in malfunction, equipment damage, or fire

hazard if limitations are not followed.

1. Read, follow and save these instructions.

If you have any questions about the installation, contact a qualified electrician or the manufacturer

before connecting the equipment.

The indicated AC adapter provides a safety ground. For installation in a building, adequate short-circuit

back-up protection must be provided.

The equipment requires the use of the ground wire as part of the safety certification. Modification or

misuse can create a shock hazard, which could cause serious injury or death.

and. A protective connection must be installed in accordance with national wiring rules and regulations.

3. This equipment is supplied with a detachable power cord that has an integral safety ground wire designed to be

connected to a safety ground. a. Do not substitute the power cord with one other than the approved type provided.

Never use an adapter plug to connect to a two-wire outlet, as it will break the continuity of the ground wire.

3. Only use the devices or accessories indicated by the manufacturer.

2. This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.

electrical safety information

safety instructions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions.

1.This device may not cause harmful interference.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

The limited warranty requires arbitration to resolve disputes on a case-by-case basis and, where

appropriate, specifying arbitration instead of jury trials or class actions.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide acceptable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his own

expense.

2.This device must accept any interference received, including interference that may cause

undesired operation.

ui.com/support/warranty

Compliance

CE marked

limited warranty

FCC

Inhaltsverzeichnis

Andere Ubiquiti Schalten Handbücher

Ubiquiti

Ubiquiti UniFi US-8-60W Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi SWITCH 8 60W Bedienungsanleitung

Ubiquiti

Ubiquiti USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-150W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgePoint EP-S16 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-24-POE Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti ES-24-250W Installationshandbuch

Ubiquiti

Ubiquiti unifi switch 8 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-24-250W Bedienungsanleitung

Ubiquiti

Ubiquiti ES-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 10 XP Bedienungsanleitung

Ubiquiti

Ubiquiti ES-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti unifi switch 8 Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-8-60W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 5XP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-24-500W Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch Flex Bedienungsanleitung

Ubiquiti

Ubiquiti USW-48-POE Bedienungsanleitung

Ubiquiti

Ubiquiti US-XG-6POE Bedienungsanleitung

Ubiquiti

Ubiquiti ES-24-250W Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch