Ublox EVK-7PAM Bedienungsanleitung

1. Download the EVK-7 or the EVK-M8 software (and

documentation) from www.u-blox.com/evk-down-

loads.html and install the software. See installation

notes on back of card.

2. Connect the unit to a PC. Options:

• USB: Connect via USB port (D). Set switch (B) to USB.

The USB driver installs automatically when the device is

connected to a PC - requires internet connection.

• UART: Connect via RS232 (E). Set switch (B) to RS232.

3. Provide power to the device at all times, either via

USB on the back or the V5 IN pin on the front.

4. EVK-7PAM: Place the EVK with good sky view, no

external antenna connectivity at (A).

EVK-M8QCAM / EVK-M8CCAM: Place the EVK with

good sky view or connect antenna signal to (A).

5. Start the u-center GNSS Evaluation Software and

select the corresponding COM port and baud rate.

Quick Start EVK-7PAM / EVK-M8xCAM

2. Setup

1. Overview

A (RF IN)

D (USB)

E (RS232)

F (RST)

C (14 pin connector)

B (USB / RS232 switch)

G (Boot)

Plastic

protection

cover

UBX-13004743 - R03

The EVK-7PAM and the EVK-M8xCAM

provide a Micro USB connector for

communication and powering the

device, as well as a UART connector

for connecting to the COM port of

your PC.

DDC interface (I2C compliant) is avail-

able for both the EVK-7PAM and the

EVK-M8xCAM.

Additionally, EVK-M8xCAM supports

optional SPI bus connectivity (requires

a jumper resistor) to allow communi-

cation to a host CPU.

Notes for downloading the EVK-7 and

the EVK-M8 software package and

running the installation:

• An Internet connection is required.

Windows operating systems are

supported (x86 and x64 versions

of Vista, 7, and 8).

• Choose a package: “Software only”

or “Software and documentation”.

• Unzip the downloaded file, go

to the Tools folder, and open the

u-center zip file.

• Run the extracted u-center exe file

and follow the installer instructions.

• When the installation is complete,

you will find a u-center menu under

the Windows Start button,

All Programs > u-blox

• To uninstall the software, go to

Control Panel and remove the

u-center program and “Windows

Driver Package – u-blox AG (ublox-

usb) Ports”.

4. Interfaces

5. Installation

NOTE:Refer to recommendations in

the EVK user guide when using the

EVK-M8QCAM or EVK-M8CCAM with

a GNSS simulator.

For more information regarding the

EVK-7PAM and EVK-M8xCAM, con-

tact your nearest u-blox support:

(www.u-blox.com/en/

contact-us-support.html).

7. More information

• EVK-7PAM or EVK-M8QCAM or

EVK-M8CCAM unit

• USB cable

• Active GPS / GLONASS / BeiDou

antenna (only for EVK-M8xCAM)

• Extra battery RENATA CR2450

3. Kit includes

The u-center GNSS evaluation soft-

ware provides a powerful tool for

evaluation, performance analysis and

configuration of u-blox positioning

products.

6. u-center

Dieses Handbuch passt für folgende Modelle

Andere Ublox Computerhardware Handbücher

Ublox

Ublox RCB-F9T Gebrauchs- und Pflegehandbuch

Ublox

Ublox USB-ANNA-B4 Bedienungsanleitung

Ublox

Ublox C101-D9S Bedienungsanleitung

Ublox

Ublox C099-F9P Bedienungsanleitung

Ublox

Ublox XPLR-HPG-2 Bedienungsanleitung

Ublox

Ublox EVK-JODY-W163 Bedienungsanleitung

Ublox

Ublox EVK-M8 Bedienungsanleitung

Ublox

Ublox EVK-NINA-W13 Bedienungsanleitung

Ublox

Ublox JODY-W1 Series Kurzanleitung zur Einrichtung

Ublox

Ublox XPLR-AOA-1 Bedienungsanleitung

Ublox

Ublox ANT-B10 Bedienungsanleitung

Ublox

Ublox AWS ExpressLink SARA-R5 Bedienungsanleitung

Ublox

Ublox EVK-NORA-B1 Bedienungsanleitung

Ublox

Ublox NEO-D9S Bedienungsanleitung

Ublox

Ublox EVK-F9P-00 Bedienungsanleitung

Ublox

Ublox LENA-R8 Series Kurzanleitung zur Einrichtung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung