Ublox EVK-M8 Bedienungsanleitung

2. Setup

1. Download and install the EVK-M8 software (and docu-

mentation) from www.u-blox.com/evk-search.

See installation notes on the back of this card.

2. Connect the unit to a PC. Options:

• USB: Connect via USB port (G). The USB driver

installs automatically when the device is

connected to a PC; internet connection required.

• UART: Connect via RS232 (F). Set switch (B) to I2C.

• SPI / I2C compliant DDC: Connect the pins (C).

Set switch (B) to either SPI or I2C.

NOTE: Press RST (E) after setting switch (B).

3. Provide power to the device at all times, either via USB

on the back (G) or the V5 IN pin (D) on the front.

4. Connect the GNSS antenna to the evaluation unit (A)

and place the antenna in a location with an unobstruct-

ed view of the sky. For best performance, use an active

antenna or external LNA (when connecting to a GNSS

simulator).

5. Start the u-center GNSS evaluation software and se-

lect the corresponding COM port and baud rate.

Quick Start for EVK-M8 kits

UBX-13003205 - R04

1. Overview

3. Kit includes

• EVK-M8 unit

• USB cable

• Active GPS / GLONASS / BeiDou antenna with a 3 m cable

5. Interfaces

The EVK-M8 can be used to evaluate all interfaces avail-

able on u-blox M8 chips and modules. The evaluation unit

provides a USB connector for communication and powering

the device, as well as a UART connector for connecting to

the COM port of your PC.

SPI and the I2C-compliant DDC interfaces are designed to

enable communications with a host CPU.

7. More information

NOTE: Refer to recommendations in the EVK user guide

when using the EVK-M8 with a GNSS simulator.

For more information about the EVK-M8, contact your

nearest u-blox support:

www.u-blox.com/contact-technical-support

UBX-13003205 - R04

4. Installation

Notes for downloading the EVK-M8 software package and

running the installation:

• An Internet connection is required

• Supported Windows operating systems: Windows 7

onwards (x86 and x64 versions)

• Download the u-center evaluation software

• Run the u-center installer executable le and follow the

installer instructions

• When the installation is complete, you will nd a

u-center menu under the Windows Start button,

All Programs > u-blox

6. u-center

The u-center GNSS evaluation software provides a powerful

tool for evaluation, performance analysis and conguration

of u-blox positioning products.

Andere Ublox Computerhardware Handbücher

Ublox

Ublox EVK-JODY-W163 Bedienungsanleitung

Ublox

Ublox XPLR-HPG-2 Bedienungsanleitung

Ublox

Ublox AWS ExpressLink SARA-R5 Bedienungsanleitung

Ublox

Ublox EVK-F9P-00 Bedienungsanleitung

Ublox

Ublox RCB-F9T Gebrauchs- und Pflegehandbuch

Ublox

Ublox EVK-NINA-W13 Bedienungsanleitung

Ublox

Ublox EVK-7PAM Bedienungsanleitung

Ublox

Ublox NEO-D9S Bedienungsanleitung

Ublox

Ublox JODY-W1 Series Kurzanleitung zur Einrichtung

Ublox

Ublox ANT-B10 Bedienungsanleitung

Ublox

Ublox USB-ANNA-B4 Bedienungsanleitung

Ublox

Ublox XPLR-AOA-1 Bedienungsanleitung

Ublox

Ublox EVK-NORA-B1 Bedienungsanleitung

Ublox

Ublox C101-D9S Bedienungsanleitung

Ublox

Ublox C099-F9P Bedienungsanleitung

Ublox

Ublox LENA-R8 Series Kurzanleitung zur Einrichtung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung