UBSAN H501A Bedienungsanleitung
®
H501A
PLEASE READ THE MANUAL CAREFULLY BEFORE USE.
《User Manual》
1.Quad + Phone/Pad
2.Quad + Phone +Relay
3.Quad + Transmitter
+
+
+
or
Caution:
For safety, the quadcopter is default set to CAN NOT FLY WHEN NO GPS. If you prefer to
fly when GPS is not available, please reset the value as instructed below before using.
Pull the throttle stick to the lowest position and press the Elevator stick for 1.5 seconds to
enter into the MAIN MENU interface. Push the Elevator stick up/down to select “Fly When
no GPS”, push the stick right to enter into the “ Fly When no GPS” interface, select “YES”.
The Default Setting is “NO”.Select “Exit” to exit.
Compass calibration is required after the binding as instructed on the
transmitter.
1 ) Horizontally rotate the X4 in a clockwise direction when the LCD screen shows “Calib
compass 1”
2 ) Put the X4 nose down and vertically rotate it in a clockwise direction when the LCD screen
shows “Calib compass 2”
3 ) Calibration is completed when the 4 LED indicators remain solid.
结束
开始
当显示屏显示“Calibratecompass1”
时请水平旋转飞行器“
当遥控器显示屏显示
“Calibratecompass2”时。
请垂直旋转飞行器
Horizontally rotate the X4 in a
clockwise direction when the LCD
screen shows “Calib compass 1”
Put the X4 nose down and vertically
rotate it in a clockwise direction
when the LCD screen shows “Calib
compass 2”
Start Complete
X-Hubsan H501A
Important safety notes
Operation: Be extremely careful and responsible when using the quad. Small electronic
components can be damaged due to crashes or exposure to water. To avoid any injuries, do
not use the quad with broken or damaged components.
Maintenance: Do not try to fix the quad yourself, please contact authorized distributors for
service. For more information, please visit the official website at www.hubsan.com.
Battery: Battery: Do not store the battery in high temperature area (60 ℃ or higher).
Using a Hubsan dedicated charger for recharging.
Keep the batteries away from children.
Keep the batteries dry.
USAGE ADVICE
Hubsan provides you with two files for your quad:
1.《Disclaimer》
2.《Quick Start Guide》
Watch the tutorial video and read the Disclaimer first,.
For detail information, please download User Manual at www.hubsan.com.
Read the Disclaimer first before use.
※Symbol explanation
1
- Do not fly the quad in a crowded area, always be aware of the safety of yourself and others.
- Do not fly in bad weather condition.
- Do not try to catch the quadcopter while it is still in flight.
- This product is intended for experienced pilots over the age of 14.
- Remove the battery when it is not in use, to avoid accidental injuries.
- Keep your body away from the propellers after powered on. High speed propellers are very
dangerous.
No operating Important Notice Instruction Explanation, reference
Safety Advisory Notice for Lithium-Polymer (LIPO) Batteries LiPo batteries are different from
conventional batteries in that their chemical contents are encased in a relatively lightweight
foil packaging. This has the advantage of significantly reducing their weight but it does make
them more susceptible to damage if roughly or inappropriately handled. As with all batteries,
there is a risk of fire or explosion if safety practices are ignored:
● If you do not plan to fly the quad for a long time, store the battery approximately 50%
charged to maintain battery performance and battery life.
● Please use Hubsan chargers for battery charging.
● Discharging the battery within 5C current , do not over-discharging.
● Do not charge on carpet to avoid fire.
● Batteried need to be recharged if not in use for over 3 months.
WWW.HUBSAN.COM
1.Charge and store LiPo batteries in a location where a battery fire or explosion
(including smoke hazard) will not endanger life or property.
2.Keep LiPo batteries away from children and animals.
3.Never charge the LiPo battery that has ballooned or swelled.
4.Never charge the LiPo battery that has been punctured or damaged.
5.After a crash, inspect the battery pack for signs of damage. Discard in accordance
with your country’s recycling laws.
6.Never charge the LiPo battery in a moving vehicle.
7.Never overcharge the LiPo battery.
8.Never leave the LiPo battery unattended during recharging
9.Do not charge LiPo batteries near flammable materials or liquids.
10.Ensure that charging leads are connected correctly. Reverse polarity charging can
lead to battery damage or a fire or explosion.
11.Have a suitable fire extinguisher (electrical type) OR a large bucket of dry sand near
the charging area . Do not try to extinguish electrical (LiPo) battery fires with water.
12.Reduce risks from fire/explosion by storing and charging LiPo batteries inside a
suitable container.
13.Protect your LiPo battery from accidental damage during storage and transportation.
(Do not put battery packs in pockets or bags where they can short circuit or can come
into contact with sharp or metallic objects.).
14.If your LiPo battery is subjected to a shock (such as a crash), place it in a metal
container and observe for signs of swelling or heating for at least 30 minutes.
15.Do not attempt to disassemble or modify or repair the LiPo battery.
2
Contents
X-Hubsan H501A
3
IMPORTANT SAFETY NOTES
INTRODUCTION
SYMBOL EXPLANATION
1.ITEMS INCLUDED IN THE BOX
USAGE ADVICE
2QUAD COPTER
3QUAD COPTER BATTERY
4PROPELLERS
6 TRANSMITTER
3.1INTRODUCTION
4.1INTRODUCTION
4.2 INSTALLING THE PROPELLERS
6.1 INTRODUCTION
6.1.1 TRANSMITTER KEY FUNCTION
3.2INSTALL THE BATTERY
3.3CHARGING
2.1QUAD COPTER MOTOR LED INDICATOR
1
12
12
1
12
1
13
4
13
4
13
5
5
13
13
13
14
15
5
5
5
6
15
15
17
6
6
17
17
18
18
19
19
20
20
22
23
6
7
8
10
7
10
7
11
7
12
5 X-Hubsan App
6.1.2 INSTALL THE TRANSMITTER BATTERY
6.1.3 TRANSMITTER STICK CALIBRATION
6.1.4 ADJUSTABLE 5.8GHZ FREQUENCY
6.1.5 ANTENNA INSTRUCTION
7 START TO FLY
7.1 FLIGHT ENVIRONMENT
7.2 SAFETY CHECK BEFORE FLIGHT
7.3 FLY WITH APP
7.3.1 CONNECT THE QUADCOPTER WITH APP
7.3.2 COMPASS CALIBRATION
7.4 FLY WITH TRANSMITTER
7.4.1 BIND THE QUAD WITH
TRANSMITTER
7.4.2 COMPASS CALIBRATION
7.4.3 HORIZONTAL CALIBRATION
7.4.4 ROTATION CALIBRATION
7.4.5 START/ STOP THE MOTORS
7.4.6 BASIC FLIGHT
8 ADVANCED PERFORMANCE SETUP
8.1 REVERSING CHANNEL SETUP
8.2 SENSITIVITY SET UP
8.3 HEADLESS MODE
8.4 FOLLOW ME MODE
8.5 HOME MODE
8.6 EXIT HOME MODE
9 FAILSAFE MODE
H501A TROUBLESHOOTING
SCHEMATIC DIAGRAM
H501A Spare Part Chart
4.3 REMOVING THE PROPELLERS
Introduction
Thank you for buying the HUBSAN product. It is designed as an easy-to-use, multi-functional
RC model, capable of hovering and acrobatic flight maneuvers. Please read the manual
carefully and follow all the instructions. Be sure to keep the manual for future reference.
1. Items included in the box
FPV：FFirst Person View，this feature enables you to experience every live moment of
the flight from the drone's point of view.
S/N
1
2
3
4
5
6
8
7
1PC
2Sets
1PC
1PC
1PC
1PC
1PC
2PCS
Quad copter
Propellers
Li-Po battery
Balance Charger
Adapter
Propeller Wrench
Relay HT005
User Manual
Equipped with GPS and
compass
Propeller A 4pcs, Propeller
B 4pcs
For quad copter
For recharging the
LiPo battery
110v-220v
For removing propellers
Use with X-Hubsan APP
《Disclaimer》
《Quick Start Guide》
Part Name Qty RemarksPhotos
WWW.HUBSAN.COM
4
2.Quadcopter
3Quadcopter battery
3.1 Introduction
The quadcopter battery is a rechargeable Li-Po battery with 2700mAh capacity and 7.4V
voltage.The battery should only be charged with Hubsan charger to avoid overcharge.
2.1 Quadcopter motor LED indicator
Front LED is blue; Back LED is red.
1.Power on: 4 LED indicators blink simultaneously.
2.Compass Calibration:
1). Horizontal calibration: 4 LED indicators blink circularly.
2). Vertical calibration: 4 LED indicators blink alternately .
3.Quadcopter Horizontal Calibration: 4 LED indicators blink slowly.
4.Quadcopter Rotation Calibration: 4 LED indicators blink circularly.
5.GPS Flight: 4 LED indicators will remain solid.
6.Low Voltage Return : 2 front LED indicators remain solid, and 2 back LED indicators blink
quickly.
7.Signal Lost: 2 front LED indicators blink alternately, 2 back LED indicators remain solid.
8.LED indicators can be turned off by long pressing the lower throttle trim on the transmitter.
Please make sure the battery is fully
charged before the first time use.
X-Hubsan H501A
5
3.2 Installing the battery
Push the battery into the battery compartment (as shown below) and connect the battery
cable with the correct polarity then close the battery compartment cover.
1
67
2 3 4
8 9
5Propeller B
Lower Body Shell 1080P Camera
Propeller A Motor LED Light
Battery Compartment TF Slot
[10]
Upper Body Shell
Rubber Feet
4 Propellers
4.1 Introduction
The quadcopter uses 7.3 inches propellers which are marked by A and B.
Propellers are consumables, please replace with new ones if there is any damage.
3.3 Charging
Connect the battery to the balance charger and the wall charger. The left LED indicator on the
balance charger will remain red and the right LED indicator will remain off when charging. The
battery is fully charged when the right LED indicator turns green.
It takes approximately 180 minutes to fully charge the battery.
Please take off the charger and the battery when the battery is fully charged.
Make sure the battery is fully charged before every flight.
WWW.HUBSAN.COM
Propeller A
Diagram
Installation Position
Symbol explanation LOCK: In this direction, tighten the propeller onto the motor shaft
UNLOCK: In this direction, remove the propeller from the motor shaft
Propeller B
6
4.2 Installing the propellers
Install the propellers to the corresponding motors that are marked with A and B, tighten the
propellers and keep the motors deadlocked with the U wrench.
X-Hubsan H501A
4.3 Removing the propellers
Hold the motor with the wrench, then spin the
propellers in the indicated unlock direction.
● Make sure that the A and B propellers are
installed correctly. The X4 will not fly if propellers
are improperly installed.
● Keep the moving propellers away from your
body as well as other people and any obstacles.
7
Hubsan H901A is a multi-functional FPV transmitter with 3.7inch LCD screen and 5.8G live
stream.
Recommended maximum flight distance: 300m.
6.1 Introduction
6 Transmitter
Altitude Hold
飞行器电压
飞行器机头方向角度
飞行器左右倾斜角度
飞行器俯仰倾斜角度
距离
高度
速度
遥控器电压
经纬度
飞行器GPS信号量
遥控器GPS信号量
显示飞行模式：Altitude Hold、GPS Hold、ReturnHome、Follow Mode
录像时间
拍摄状态
（拍照-录像切换） SD卡
5 X-Hubsan App
Hubsan designed an APP to go with the new X-Hubsan H501A. Users can use the APP to
control the quad, take picture/videos and set the parameters of the quad. It is recommended
to fly the quad within 100 meters and use smart devices with larger screen for the best visual
experience.
Camera Status
(Video/Photo)
Recording time
Micro SD Card
Transmitter's battery voltage
Quad copter's battery voltage
Quad copter's head data
Quad copter's roll
Quad copter's pitch
Quad copter's speed
Quad copter's distance
Quad copter's altitude
Quad copter's GPS signal strength
Transmitter's GPS signal strength
Longitude & Latitude
Flight Mode Status:
Inhaltsverzeichnis
Andere UBSAN Quadcopter Handbücher
UBSAN
UBSAN ZINO PRO+ Bedienungsanleitung
UBSAN
UBSAN ZINO MINI SE Bedienungsanleitung
UBSAN
UBSAN ZINO PRO+ Bedienungsanleitung
UBSAN
UBSAN ZINO MINI SE Bedienungsanleitung
UBSAN
UBSAN ZINO MINI PRO Bedienungsanleitung
UBSAN
UBSAN ZINO MINI PRO Bedienungsanleitung
UBSAN
UBSAN ZINO MINI SE Bedienungsanleitung
UBSAN
UBSAN Q4 Bedienungsanleitung
UBSAN
UBSAN H216A X4 STAR PRO Bedienungsanleitung
UBSAN
UBSAN Q4 FPV Bedienungsanleitung
