UDP Technology IPN100HD Bedienungsanleitung
IPN100HD
Installation Guide
ETHERNET
DO DI
Out In
Com
DC12V
Com
INFORMATION TO USER
CAUTION
RISK OF ELECTRIC SHOCK,
DO NOT OPEN
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SEERIVCE PERSONEL.
This symbol is intended to alert the user to the presence of un-insulated
“dangerous voltage”within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
!
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 3
Table of Contents
1. FEATURES............................................................................................................. 4
2. PACKAGE CONTENTS............................................................................................. 5
3. PART NAMES ........................................................................................................ 6
4. INSTALLATION ...................................................................................................... 8
4.1. Lens Position ...................................................................................................................... 9
4.2. Setting the Image Attribute ............................................................................................... 9
5. CONNECTIONS.................................................................................................... 10
5.1. Connectors ....................................................................................................................... 10
6. CONFIGURATION ................................................................................................ 12
6.1. Set up network environment ........................................................................................... 12
6.1.1. Generic IP Environment ............................................................................................ 12
6.1.2. Custom IP Environment............................................................................................. 13
6.2. View video on web page .................................................................................................. 14
6.3. Reset................................................................................................................................. 15
6.4. Factory Default................................................................................................................. 15
APPENDIX (A): SPECIFICATIONS .............................................................................. 16
Summary ................................................................................................................................. 16
Functional Features................................................................................................................. 17
Environment Characteristics ................................................................................................... 17
Environment Characteristics ................................................................................................... 17
Mechanical Characteristics ..................................................................................................... 17
APPENDIX (B): DIMENSIONS ................................................................................... 18
APPENDIX (C): HEXADECIMAL-DECIMAL CONVERSION TABLE.................................. 19
REVISION HISTORY ................................................................................................. 20
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 4
1. FEATURES
Camera
Indoor Cube IP Camera
HD720 (1280 x 720) streaming
1/4”720p CMOS
Improvement of color rolling suppression
Streaming
Dual streaming mode
Burnt-in text supported
Unicast supported
Video/Audio
Video compression: H.264/ MJPEG, 30FPS@720p
Audio compression: G.711(µLaw, aLaw)
Built-in video motion detection
Two-way mono audio supported
Network
RTSP/ HTTP protocol supported
10/100 Base-T Ethernet
Additional Features
Micro SD card supported
(Indoor model built-in, Outdoor model available with factory order only)Built-in Video
Content Analysis
SDK (Software Development Kit) provided
VCA (Video Content Analysis)
VCA Presence (Standard)
VCA Surveillance (Optional)
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 5
2. PACKAGE CONTENTS
Unpack carefully and handle the equipment with care. The packaging contains:
Camera
DC power adaptor
Screws and Anchor blocks
4 Pin terminal block
Quick Installation Guide
Note
i
Package contents are subject to change without prior notice.
ETHERNET
DO DI
Out In
Com
DC12V
Com
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 6
3. PART NAMES
①PIR sensor
Detects movement of objects
②Sensor indicator LED
When PIR sensor detects, the indicator glows in red
③Status LED
LED glows in green when the device is connected
④Microphone
Built-in microphone
⑤Privacy Shutter
Manual shutter to close the lens
⑥Camera lens
Prepositioned 1/4”720p CMOS sensor
⑦Reset button
The reset button can be used for restarting the device or resetting it to Factory Default. Refer to 6.3. Re
set and 6.4. Factory Default for more details.
⑧Speaker
Built-in speaker
⑨LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
⑩Power Adaptor Connector (DC 12V)
The camera needs a DC 12V adapter for power supply.
②
* Models herein and their appearance are subject to change without any prior notice.
⑥
①
③
④
⑤
⑪
ETHERNET
DO DI
Out In
Com
DC12V
Com
⑦
⑧
⑨
⑩
○
12
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 7
⑪4 pin terminal block for D/I, D/O
4 pin terminal block for D/I and D/O
⑫Micro SD Card Socket
Memory card slot for external storage. Supports up to 32GB.
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 8
4. INSTALLATION
1) Drill two holes on the desired position of installation and insert anchor blocks into
the holes.
2) Position the mount bracket to anchor blocks.
3) Fasten the mount bracket with screws.
4) Manually position the camera to area where it will be monitored.
To prevent camera falling off from the mounted area, make sure the mounted
surface firm and stable enough to support the camera. If any reinforcement is
needed, consult with your safety personnel and proceed with the installation.
Caution
!
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 9
4.1. Lens Position
IPN100HD’s lens is prepositioned. While installing with wall-mount bracket, position the
camera body where images will be captured.
4.2. Setting the Image Attribute
Image attributes can be configured through the web interface. (Microsoft® Internet Explorer
recommended) The menu of image attribute can be found under Setup > Video & Audio >
Camera. Through setting menu, brightness, contrast, saturation and sharpness, orientation,
exposure control, backlight compensation, digital slow shutter (DSS), day and night mode, and
image noise filter can be adjusted.
IPX/IPN Series IPN100HD Installation Guide
01A.00 UDP Technology Ltd. 10
5. CONNECTIONS
5.1. Connectors
①Sensor (DI) connection
The camera provides 1 channel D/I. It can be connected to either a voltage type sensor or a
relay type sensor as the following figures. It can be selected by software.
Input voltage range: 0VDC minimum to 5VDC maximum, Max 50mA
Input voltage threshold: 4.5V
Caution
!
Do not exceed the maximum input voltage or relay rate.
②Alarm (DO) connection
Only the relay type is supported.
Relay Rating: Max 24VAC 500mA or 12VDC 1A
+5V
DI
COM
DI
COM
+
-
Relay Type
Voltage Type
+
-
Output of
Sensor
Output of
Sensor
Internal
Internal
+
-
ETHERNET
DO DI
Out In
Com
DC12V
Com
ETHERNET
DO DI
Out In
Com
DC12V
Com
①
②
Inhaltsverzeichnis
Andere UDP Technology Sicherheitskamera Handbücher
