Ultra Start 80 Series Bedienungsanleitung

WARING: NEVER USE AN AUTOMATIC TRANSMISSION

STARTER IN A MANUAL TRANSMISSION VEHICLE

REV.2011.7.22

AUTOMATIC AND MANUAL TRANSMISSION MODELS*

*MUST USE M SERIES REMOTE STARTER!

Advanced Remote Starters & Vehicle Security Systems

80 SERIES

IMPORTANT NOTES...........................................................................................PAGE 3

QUICK VIEW OPERATIONS...............................................................................PAGES 4-5

LOCK UNLOCK

TRUNK START

STOP

SYSTEM OPERATIONS DETAILED...................................................................PAGES 6-13

COLD START MODE...........................................................................................PAGE 14

TIME AND TEMPERATURE SETTINGS

SERVICE MODE.................................................................................................PAGE 15

OVERRIDE MODE/ SERVICE MODE

TRANSMITTER PROGRAMMING......................................................................PAGE 16

SHOCK SENSOR PROGRAMMING (ALARM MODELS)...................................PAGE 17

DIAGNOSTICS....................................................................................................PAGE 18

DIAGNOSTICS CHART

DIAGNOSTIC MEMORY

WARRANTY.........................................................................................................PAGE 19

CONTACT INFO..................................................................................................PAGE 20

LOCK UNLOCK

TRUNK START

STOP

SHOCK SENSOR ADJUST

SHOCK SENSOR BYPASS

80 SERIES

IMPORTANT NOTES

BEFORE YOU START

80 SERIES

IMPORTANT NOTES...........................................................................................PAGE 3

QUICK VIEW OPERATIONS...............................................................................PAGES 4-5

LOCK UNLOCK

TRUNK START

STOP

SYSTEM OPERATIONS DETAILED...................................................................PAGES 6-13

COLD START MODE...........................................................................................PAGE 14

TIME AND TEMPERATURE SETTINGS

SERVICE MODE.................................................................................................PAGE 15

OVERRIDE MODE/ SERVICE MODE

TRANSMITTER PROGRAMMING......................................................................PAGE 16

SHOCK SENSOR PROGRAMMING (ALARM MODELS)...................................PAGE 17

DIAGNOSTICS....................................................................................................PAGE 18

DIAGNOSTICS CHART

DIAGNOSTIC MEMORY

WARRANTY.........................................................................................................PAGE 19

CONTACT INFO..................................................................................................PAGE 20

LOCK UNLOCK

TRUNK START

STOP

SHOCK SENSOR ADJUST

SHOCK SENSOR BYPASS

80 SERIES

IMPORTANT NOTES

BEFORE YOU START

PAGE 4

80 SERIES

PAGE 5

80 SERIES

1 SECOND 1 LOCK DOORS/ ARM ALARM

3 SECONDS 1ACTIVATE PANIC MODE

PRESS THEN

RELEASE THEN

PRESS & HOLD

1 ACTIVATE CONSTANT LOCK OUTPUT

LOCK

BUTTON PRESS HONKS /

FLASH SYSTEM FUNCTION

BUTTON

1 SECOND 2UNLOCK DOORS/ DISARM ALARM

1 SECOND

WHILE ALARM IS

TRIGGERED

NONE TURNS OFF ALARM/ DOOR STAY LOCKED

UNLOCK/

TRUNK

PRESS & RELEASE 1 ACTIVATES REMOTE STARTER

PRESS AND HOLD

HOLD FOR 3 SEC

AUXILIARY #1 OUTPUT (DEFAULT)

CAR FINDER (PROGRAMMABLE)

PRESS TOGETHER

THEN RELEASE

PRESS TOGETHER

THEN RELEASE

ACTIVATES SILENT LOCK WITHOUT

CHIRPS

ACTIVATES SILENT UNLOCK WITHOUT

CHIRPS

PRESS & HOLD 2 TURN OFF REMOTE STARTER

START

AUX

5 SECONDS 2AUXILIARY #2 OUTPUT

OPTIONAL 2 BUTTON REMOTE NOTES

THE SYSTEM MUST BE PROGRAMMED FOR 2 BUTTON REMOTE LOCK/UNLOCK

TOGGLE TO OPERATE THE LOCK FEATURE ON THE VEHICLE. PRESSING THE UNLOCK

BUTTON WILL TOGGLE BETWEEN THE LOCK AND UNLOCK OUTPUT.

THE SYSTEM MUST BE PROGRAMMED FOR 2 BUTTON REMOTE OR LOCK/UNLOCK

TOGGLE TO ACCESS COLD START MODE AND THE FOURTH PROGRAM MENU.

PLEASE NOTE THAT THE DOOR LOCK/ UNLOCK FEATURE IS AN OPTION AND MAY

REQUIRE ADDITIONAL PART AND LABOR.

1 SEC

2ND CAR LOCK / ARM ALARM

2ND CAR UNLOCK / DISARM ALARM

2ND CAR REMOTE START

3 SEC

2ND CAR ACTIVATE PANIC

UNLOCK THEN TRUNK RELEASE

2ND CAR REMOTE SHUTDOWN

PRESS /RELEASE

THEN PRESS & HOLD 12ND CAR

OUTPUT

ACTIVATE CONSTANT LOCK

BUTTON PRESS HONKS /

FLASH SYSTEM FUNCTION

BUTTON

2ND CAR

OPERATION

2ND CAR

OPERATION

2ND CAR

OPERATION

PAGE 4

80 SERIES

PAGE 5

80 SERIES

1 SECOND 1 LOCK DOORS/ ARM ALARM

3 SECONDS 1ACTIVATE PANIC MODE

PRESS THEN

RELEASE THEN

PRESS & HOLD

1 ACTIVATE CONSTANT LOCK OUTPUT

LOCK

BUTTON PRESS HONKS /

FLASH SYSTEM FUNCTION

BUTTON

1 SECOND 2UNLOCK DOORS/ DISARM ALARM

1 SECOND

WHILE ALARM IS

TRIGGERED

NONE TURNS OFF ALARM/ DOOR STAY LOCKED

UNLOCK/

TRUNK

PRESS & RELEASE 1 ACTIVATES REMOTE STARTER

PRESS AND HOLD

HOLD FOR 3 SEC

AUXILIARY #1 OUTPUT (DEFAULT)

CAR FINDER (PROGRAMMABLE)

PRESS TOGETHER

THEN RELEASE

PRESS TOGETHER

THEN RELEASE

ACTIVATES SILENT LOCK WITHOUT

CHIRPS

ACTIVATES SILENT UNLOCK WITHOUT

CHIRPS

PRESS & HOLD 2 TURN OFF REMOTE STARTER

START

AUX

5 SECONDS 2AUXILIARY #2 OUTPUT

OPTIONAL 2 BUTTON REMOTE NOTES

THE SYSTEM MUST BE PROGRAMMED FOR 2 BUTTON REMOTE LOCK/UNLOCK

TOGGLE TO OPERATE THE LOCK FEATURE ON THE VEHICLE. PRESSING THE UNLOCK

BUTTON WILL TOGGLE BETWEEN THE LOCK AND UNLOCK OUTPUT.

THE SYSTEM MUST BE PROGRAMMED FOR 2 BUTTON REMOTE OR LOCK/UNLOCK

TOGGLE TO ACCESS COLD START MODE AND THE FOURTH PROGRAM MENU.

PLEASE NOTE THAT THE DOOR LOCK/ UNLOCK FEATURE IS AN OPTION AND MAY

REQUIRE ADDITIONAL PART AND LABOR.

1 SEC

2ND CAR LOCK / ARM ALARM

2ND CAR UNLOCK / DISARM ALARM

2ND CAR REMOTE START

3 SEC

2ND CAR ACTIVATE PANIC

UNLOCK THEN TRUNK RELEASE

2ND CAR REMOTE SHUTDOWN

PRESS /RELEASE

THEN PRESS & HOLD 12ND CAR

OUTPUT

ACTIVATE CONSTANT LOCK

BUTTON PRESS HONKS /

FLASH SYSTEM FUNCTION

BUTTON

2ND CAR

OPERATION

2ND CAR

OPERATION

2ND CAR

OPERATION

80 SERIES

1. Press and release the Start button on the remote transmitter.*

2. The park lights will flash and the siren**/ horn will chirp once.

3. The vehicle will remote start. The park lights will stay on during run time***

See diagnostic chart if your vehicle fails to start.

Note- Manual transmission vehicles must be set for reservation mode before remote

starting. If your vehicle starts without setting reservation mode return to your dealer

immediately as the incorrect remote starter has been installed.

*Press twice within 3 seconds if the system is programmed for Safety Start.

** Alarm Models

***Default 15 minutes

*Press # twice on manual transmission models.

80 SERIES

1. Press and release the Start button on the remote transmitter.*

2. The park lights will flash and the siren**/ horn will chirp once.

3. The vehicle will remote start. The park lights will stay on during run time***

See diagnostic chart if your vehicle fails to start.

Note- Manual transmission vehicles must be set for reservation mode before remote

starting. If your vehicle starts without setting reservation mode return to your dealer

immediately as the incorrect remote starter has been installed.

*Press twice within 3 seconds if the system is programmed for Safety Start.

** Alarm Models

***Default 15 minutes

*Press # twice on manual transmission models.

80 SERIES

ARM SYSTEM / LOCK DOORS

PRESS & RELEASE

Programmable.

RESERVATION MODE

RESERVATION MODE TYPE -1 (DEFAULT SETTING)

1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).

2) APPLY THE PARKING BRAKE.

3) PRESS AND RELEASE THE # BUTTON ON THE REMOTE.

THE PARK LIGHTS WILL FLASH AND THE HORN (IF CONNECTED) WILL HONK

TWICE.

4) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).

5) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.

THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.

RESERVATION MODE TYPE -2 (DEALER PROGRAMMABLE)

1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).

2) APPLY THE PARKING BRAKE.

THE PARK LIGHTS WILL FLASH AND THE HORN (OPTIONAL) WILL HONK TWICE.

3) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).

4) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.

RESERVATION MODE WILL CANCEL IF A DOOR IS RE- OPENED. TO ENTER THE

VEHICLE WITHOUT CANCELLING RESERVATION MODE REMOTE START THE

VEHICLE THEN SHUT THE SYSTEM OFF BY THE REMOTE ONCE THE DOORS ARE

CLOSED AGAIN.

THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.

REQUIRED ON MANUAL TRANSMISSION VEHICLES ONLY. RESERVATION MODE

MUST BE SET TO REMOTE START THE VEHICLE.

SYSTEM PROGRAMMING - Menu 1

PAGE 8

80 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

SYSTEM PROGRAMMING - Menu 1

PAGE 9

80 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

ARM SYSTEM / LOCK DOORS

PRESS & RELEASE

Programmable.

RESERVATION MODE

RESERVATION MODE TYPE -1 (DEFAULT SETTING)

1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).

2) APPLY THE PARKING BRAKE.

3) PRESS AND RELEASE THE # BUTTON ON THE REMOTE.

THE PARK LIGHTS WILL FLASH AND THE HORN (IF CONNECTED) WILL HONK

TWICE.

4) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).

5) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.

THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.

RESERVATION MODE TYPE -2 (DEALER PROGRAMMABLE)

1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING).

2) APPLY THE PARKING BRAKE.

THE PARK LIGHTS WILL FLASH AND THE HORN (OPTIONAL) WILL HONK TWICE.

3) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).

4) EXIT THE VEHICLE. THE ENGINE WILL SHUT OFF WHEN THE DOOR IS CLOSED.

RESERVATION MODE WILL CANCEL IF A DOOR IS RE- OPENED. TO ENTER THE

VEHICLE WITHOUT CANCELLING RESERVATION MODE REMOTE START THE

VEHICLE THEN SHUT THE SYSTEM OFF BY THE REMOTE ONCE THE DOORS ARE

CLOSED AGAIN.

THE SYSTEM CAN NOW BE ACTIVATED BY PRESSING THE START BUTTON.

REQUIRED ON MANUAL TRANSMISSION VEHICLES ONLY. RESERVATION MODE

MUST BE SET TO REMOTE START THE VEHICLE.

SYSTEM PROGRAMMING - Menu 1

PAGE 8

80 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

SYSTEM PROGRAMMING - Menu 1

PAGE 9

80 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

*Not available on all models

80 SERIES

PAGE 10

PAGE 11

Andere Handbücher für 80 Series

Inhaltsverzeichnis

Andere Ultra Start Fernstartsystem Handbücher

Ultra Start

Ultra Start 4500 Bedienungsanleitung

Ultra Start

Ultra Start 22 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 2500 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 3250M Bedienungsanleitung

Ultra Start

Ultra Start PRO Series Bedienungsanleitung

Ultra Start

Ultra Start 25 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 1150 Series Bedienungsanleitung

Ultra Start

Ultra Start 25XX Series Bedienungsanleitung

Ultra Start

Ultra Start 1155 Series Bedienungsanleitung

Ultra Start

Ultra Start 2250 Series Bedienungsanleitung

Ultra Start

Ultra Start 15 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 35 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 1250 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 1172 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 1600 Bedienungsanleitung

Ultra Start

Ultra Start 1500 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 32 SERIES Bedienungsanleitung

Ultra Start

Ultra Start RFK4BAM Bedienungsanleitung

Ultra Start

Ultra Start 2250M Bedienungsanleitung

Ultra Start

Ultra Start 1350 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 15 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 1250 SERIES Bedienungsanleitung

Ultra Start

Ultra Start 72 SERIES 1272 Bedienungsanleitung

Ultra Start

Ultra Start 32 SERIES Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch

Rooboost

Rooboost RB-1750WP Bedienungsanleitung