Uniden DCX730 Series Bedienungsanleitung

Welcome

Congratulations on your purchase of the Uniden DCX730

accessory handset and charger. You can place this fully

featured cordless handset anywhere your home has AC power.

Note: Illustrations in this manual are used for explanation

purposes. Some illustrations may differ from the actual unit.

Accessibility

Uniden provides a customer service hotline for accessibility

questions. If you have a disability and need customer service

assistance or if you have any questions about how Uniden's

products can accommodate persons with disabilities, please

call the accessibility voice/TTY line: 1-800-874-9314.

Our customer care hours as well as accessibility information

can be found on our website, www.uniden.com, under the

"Accessibility" link." If your call is received outside of our

business hours, you can leave us a message and we will call

you back.

Important!

The DCX730 accessory handset will not operate until it is

registered to a Uniden main base. This manual describes how

to set up your new handset; for more detailed instructions on

operating your new handset, please refer to the manual

supplied with your base.

Terminology Used in this Manual

Uniden®is a registered trademark of Uniden America Corporation.

Base The main part of the phone that connects to your phone line

and lets you make and receive calls.

Charger A cradle that charges an accessory handset. It connects to

power but not to a phone line.

Accessory

Handset

A handset that works with an expandable phone base.

Accessory handsets must be registered to a base.

Standby The handset is not in use. If it is off the cradle, no line has

been activated. No dial tone is present.

Station Any handset or the base.

Talk A telephone line has been activated on the handset or the

base, enabling a dial tone.

Compatible Bases

This handset is compatible with Uniden's 2.4 GHz Digital

Expandable phone system: the DCT736/DCT738 series, the

DCT746/DCT748 series, the DCT756/DCT758 series, the

DMX776/778 series, and the DCT646/DCT648 series. Visit

www.uniden.com for the most up-to-date list of compatible

bases.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any

items are missing or damaged, contact our Customer Service

Hotline. See back cover page for contact information.

Installing the Battery

Follow the steps below to install the

rechargeable battery pack.

1. Using the finger indentation, press in

on the battery case cover and slide it

down to remove it.

2. Plug the battery connector into the

battery compartment jack. Be sure to

match the red and black wires to the

label near the jack.

3. Gently pull on the battery wires. If the

battery connector comes loose, try

connecting it again.

4. Replace the battery case cover and

slide it up until it clicks into place.

Note: Use only the Uniden BT-1004

rechargeable battery pack supplied

with your cordless telephone.

• Cordless Handset

• Charging Cradle

• AC Adapter, model # AD-0005

Input: 120V AC 60 Hz

Output: 9V DC 210 mA

• Rechargeable NiMH Battery

Pack, model # BT-1004

Capacity: 500 mAh, 3.6V

•Beltclip

• Printed Material

Charging the Accessory Handset

The handset is powered by a rechargeable battery pack that

automatically recharges when the handset is placed in the

charger.

1. Connect the AC

adapter to the

DC IN

jack and to a

120V AC outlet that

is not controlled by a

wall switch.

Caution: Use only

the Uniden AD-0005

adapter.

2. Set the charger on a

desk or tabletop, and

place the handset in

the charger with the keypad facing forward.

3. Make sure that the

charge

LED illuminates. If the LED does not

illuminate, check to see that the AC adapter is plugged in and

the handset makes good contact with the charging contacts on

the charging cradle.

4. Charge the handset battery pack for at least 15-20 hours before

using your new handset for the first time.

Registering the Handset

You must register the handset to the base before you can use it.

Only one handset can be registered at a time. (If an accessory

handset has ever been registered to a base, you must reset the

handset before you can register it to a new base.)

Note: The model number for your telephone base is located

on the bottom of main base unit.

For DCT73 and DCT75

Series Bases (DCT736,

DCT738, DCT756, DCT7565,

DCT758, DCT7585)

To register to a DCT73 or

DCT75 series base, place the

accessory handset in the

base. While the handset is

registering, HANDSET

REGISTERING appears in

the LCD. When

REGISTRATION COMPLETE

is displayed, the handset has

been registered to the base.

If REGISTRATION FAILED

appears, remove the handset

from the base and try again.

For Other Base Models

1. Select your base model from the list and follow the directions:

2. On the handset, press and hold

[#/

→

]

until you hear a beep and

see HANDSET REGISTERING in the display.

3. When REGISTRATION COMPLETE is displayed, the handset

has been registered to the base. If REGISTRATION FAILED

appears, please try these steps again.

MODEL DIRECTIONS:

DCT646

DCT746

Disconnect the base AC adapter. Press and hold

[find handset]

while you reconnect the adapter.

DCT6465

DCT6485

Disconnect the base AC adapter. Press and hold

[intercom]

while you reconnect the adapter.

DCT648 Disconnect the base AC adapter. Press and hold

[intercom/find handset]

while you reconnect the adapter.

DCT748 Disconnect the base AC adapter. Press and hold

[find hs/ ]

and

[]

while you reconnect the adapter.

DCT7488 Press the

soft key. Scroll down to HS

REGISTRATION and press the OK soft key.

DMX776

DMX778

Press and hold the registration button on the bottom of the

base until the base LEDs start blinking.

Resetting the Handset

If you want to register the handset to a different base or

replace a handset with another one, you must first clear the

registration information from the base and the handset.

1. Press and hold

[]

and

[#/ ]

for at least 5 seconds,

until the SYSTEM RESET

menu appears.

2. Select the DEREGISTER

HS submenu by pressing

[select/ ]

WHICH HANDSET? appears in the display.

3. Use

[]

to select the handset ID to be de-

registered from the list, and then press

[select/ ]

DEREGISTER HS appears.

4. Press

[]

to move the cursor to YES, and then press

[select/ ]

. You will hear a confirmation tone.

Resetting the Handset Without the Base

If the original base this handset was registered to is not

available for some reason (for example, it is lost or somehow

incapacitated), you can still reset the handset and use it with

another base.

1. Press and hold

[]

and

[#/ ]

for more than 5 seconds.

2. Press

[

]to move the cursor to REPLACING BASE and

then press

[select/ ]

. REPLACE BASE appears.

3. Press

[]

to move the cursor to YES, and then press

[select/ ]

. You hear a confirmation tone, and the handset

deletes its own link to the base without trying to contact

the base.

4. Register the handset to the new base.

Using the Interface

Parts of the Handset

1. Antenna

2. Speaker phone

speaker and ringer

3. Battery

compartment

4. New message LED

5. Earpiece

6. LCD display

[menu/clear]

[redial/pause]

[ /flash]

(talk/flash)

10.

[]

(phonebook)

11.

[

∗

/tone/ ]

12.

[xfer/intercom]

(transfer/intercom)

13.

[select/ ]

(select/messages)

14.

[]

(up)

.[ ]

(end call)

16.

[]

(Caller ID)

17.

[]

(down)

18.

[#/ ]

(pound)

19.

[]

(speaker)

20.Microphone

21.Charging contacts

Reading the Display

The handset display uses icons to tell you the status of your

phone. The table below lists the icons and what they mean.

The Standby Screen

When the phone is in standby, the display shows the following:

Using the Four-way Function Key

Your handset has a four-way

function key that allows you to

move the cursor or pointer on

the display and access the

most commonly used features

at the touch of a button. Press

the left side of the key to open

the phonebook. Press the right

side to open the Caller ID list.

ICON STATUS DESCRIPTION

Standby/

Talk

The battery icon indicates the handset

battery status:

full, medium, low, and empty.

Standby The ringer off icon indicates that the

ringer is turned off.

Talk The mute icon appears when you mute

the handset.

Talk The call record icon appears while

recording a conversation.

Talk The boost icon appears when the

Clarity Boost feature is activated.

Talk The speaker icon appears when the

handset speaker phone is in use.

Talk The privacy icon appears when

Privacy Mode is turned on.

LAIDE

EBM

Open the

phonebook

Open the

Caller ID list

Volume up

Volume

down

Four-way

function key

To use this four-way key, place your thumb over the key on the

handset and move to the four positions to get the feel of how it

moves and operates.

Using the Handset Menus

To open the menu, press

[menu/clear]

. Select the option you

want by pressing the four-way function key. This will move the

cursor; the option currently selected has a triangle beside it.

Activate the selected option by pressing

[select/ ]

. To exit the

menu and return to standby, press

[]

If you do not press a key within 30 seconds, the phone will

time out and exit the menu. When setting the date and time,

the time-out period is extended to two minutes.

Making and Receiving Calls

* If AutoTalk is on, the phone answers when you remove the

handset from the charging cradle.

** If Any Key Answer is on, you can press any key in the

twelve-key pad.

Using Caller ID and Call Waiting

If you subscribe to Caller ID, you can store up to 100 Caller ID

records. Your phone shares memory between your phonebook

and Caller ID entries. If you have 100 phonebook entries,

Caller ID records won't be saved (but will display when the

call comes in).

Press

[]

to open the Caller ID record list. The first thing you

will see is the summary screen. From the summary screen,

you have the following options:

With the earpiece With the speaker phone

Make a

call

1.Remove the handset from

the charger.

2.Dial the number.

3.Press

[/flash]

1.Remove the handset from

the charger.

2.Dial the number.

3.Press

[]

Answer

a call

1.Pick up the handset.*

2.Press

[/flash]

.**

1.Pick up the handset.*

2.Press

[]

Hang

up Press

[]

or return the

handset to the cradle.

Press

[]

or return the

handset to the cradle.

Using Call Waiting

If you subscribe to call waiting, a tone sounds if a call comes

in when you are on the phone. If you subscribe to Caller ID on

call waiting, the Caller ID information of the waiting call

appears on the display. Press

[ /flash]

on the handset to

accept the waiting call. After a short pause, you will hear the

new caller. To return to the original caller, press

[ /flash]

on the

handset again.

Redialing a Number

To redial one of the last 3 numbers dialed on this handset,

press

[redial/pause]

when the phone is in standby. This opens

the redial list. Use

[]

and

[]

to find the number you want to

dial, and press

[ /flash]

[]

.(You can also press

[/flash]

[]

, and then [redial/pause] to redial the last number dialed.)

Using the Phonebook

You can store up to 100 names and numbers in the

phonebook. Your handset shares memory between your

phonebook and Caller ID entries. When all the phonebook

entries are full, you will hear a beep and MEMORY FULL

appears. You cannot store any additional names and numbers

unless you delete some of the existing ones.

Scroll through the

records

To scroll through the records from A to Z,

press

[]

. To scroll trough the records from Z to

A press

[]

Jump to records that

start with a certain

letter

Press the number key corresponding to the letter

you want to jump to.

Store a record in the

phonebook

Find the record you want to store and press

[select/ ]

Dial a record Find the entry you want to dial and press

[/flash]

[]

Delete a record Find the entry you want to dial and press

[menu/clear]

Delete all records Press

[menu/clear]

Exit the Caller ID list Press

[]

or press

[]

again if you are on a call.

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden D2280-2 Bedienungsanleitung

Uniden

Uniden EXP91 Bedienungsanleitung

Uniden

Uniden AMWUC511 Bedienungsanleitung

Uniden

Uniden EXLI 8962 Bedienungsanleitung

Uniden

Uniden DCT7585 - DCT 7585 Cordless Phone Service-Handbuch

Uniden

Uniden DECT2180 Bedienungsanleitung

Uniden

Uniden EP200 Bedienungsanleitung

Uniden

Uniden EXT 1960 Bedienungsanleitung

Uniden

Uniden EXAI 398 Series Bedienungsanleitung

Uniden

Uniden BLUETOOTH XDECT R035BT Bedienungsanleitung

Uniden

Uniden EXP920 Bedienungsanleitung

Uniden

Uniden XDECT 7015WP Series Bedienungsanleitung

Uniden

Uniden EXT3165 Bedienungsanleitung

Uniden

Uniden TRU9360 Series Service-Handbuch

Uniden

Uniden EXS 2010 Montageanleitung

Uniden

Uniden XC3545 Bedienungsanleitung

Uniden

Uniden D2280 Bedienungsanleitung

Uniden

Uniden EXV 98 Bedienungsanleitung

Uniden

Uniden EXP 3240 Series Bedienungsanleitung

Uniden

Uniden DECT2085-4WX Bedienungsanleitung

Uniden

Uniden TWX977 Series Bedienungsanleitung

Uniden

Uniden CXAI 5198 SERIES Bedienungsanleitung

Uniden

Uniden DECT1725 Series Bedienungsanleitung

Uniden

Uniden EXI 3965 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung