Uniden DECT1915+1 Bedienungsanleitung

Ver. 1, Jan 05

USER GUIDE

THIS EQUIPMENT IS NOT DESIGNED FOR

MAKING EMERGENCY TELEPHONE CALLS

WHEN THE POWER FAILS. ALTERNATIVE

ARRANGEMENTS SHOULD BE MADE FOR

ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

DIGITAL CORDLESS

TELEPHONES

WITH SMS

DECT1915/1915+1

MESSAGING

AND FULL

COLOUR

DISPLAY

Important note — emergency calls

The DECT 1915/1915+1 is not designed for making

emergency calls when the mains power fails. So you

should make alternative arrangements for access to

Emergency Services.

(This means that you should also have a basic

phone that does not need mains power, connected

to your line so that you can make calls during a

power failure.)

If you need help …

Visit our websites for information;

Australia: www.uniden.com.au

Unpacking your DECT1915/1915+1

system

In the box are:

■the cordless handset

■the base unit

■two rechargeable batteries and a battery

compartment cover for each handset

■

atelephone line cable for the base unit

■amains power lead and adapter for the base

unit

■charger pod with separate mains power lead

and adaptor (DECT1915+1 only).

Keep the packaging materials in a safe place in

case you later need to transport the unit.

Keep your sales (till) receipt, which is your

guarantee.

■extra handset(DECT1915+1 only)

New Zealand: www.uniden.co.nz

■

atelephone line cable adaptor (Australia only)

INT (Intercom) button

Press and hold for 1 second to

make an intercom call (if you

have more than one handset).

Where to find it

CHARGE light

This comes on when the

handset’s batteries are

being charged.

PHONE button

Press to begin or answer a phone call.

Press during a call to switch the

speakerphone on and off.

(Note: the speakerphone won’t work if

the batteries are low.)

Left and right Soft buttons

Press to select the functions shown

above them on the display (for

example, or ).Redial Menu

Headset socket

(Headset is not available for this model)

If the display is blank

Press the button to switch the handset on

Display

For details of how to change the screen

background, refer to the

functions in the section headed ‘Quick

reference guide to the menus’.

Extra menu

Before you can use the handset to make calls you will need to fit

and fully charge the batteries, as described on pages 4 to 6.

HANDSET LOCATOR button

Press to make all registered handsets

ring (useful if you've forgotten

where you put a handset).

F(Flash) button #

You may need this during a call if your DECT 1915/1915+1

is connected to a PBX, or if you use a Call Waiting service

provided by your network provider.

IN USE light

This comes on when you have a

connection to the telephone line.

Arrow buttons

Press or

Press to navigate through the menu on the

display.

Press in idle mode for short-cut functions —

during a call to adjust the

volume in the earpiece.

to go straight to the

menu. SMS text

messages

to display a showing

today’s date.

calendar

to go straight to a list of

(CID) records. Caller

Display

to go straight to a list of

entries. Phone

Book

HANG UP /C/ button

Press to end a call.

Press while using menus to cancel and

return to idle mode.

Press and hold for 4 seconds to turn

the handset on and off.

Press and hold for 2 seconds to lock

and unlock the keypad.

Short cuts

To subscribe to network features like Caller Display and Call Waiting,

simply call your network service provider (the company which

supplies your telephone line). You don’t need to do anything special

to set these features up.on your DECT 1915/1915+1 phone

PBX: Press and hold this button for a Flash signal.

CW: If the Call Waiting tone sounds during a call Press and

hold this button then 2 to switch between callers.

Contents

Read these notes first 3

Choosing a site for the base unit and

charger pod 3

Radio signals between handset and

base unit 3

Mains power connection 3

Installation and set-up 4

Before you start 7

Electrical safety 7

Interference 7

‘Out of range’ warning 7

Exploring the display 8

Shortcut buttons 9

To lock the keypad 9

Switching on and off 10

Ringer melodies and volumes 10

Your handset’s name 11

Time and date 12

Making and answering calls 13

To make a call 13

To answer a call 13

… and if you don’t want to answer 13

To end a call 14

The speakerphone 14

Muting the microphone 14

Earpiece volume 14

Last Number Redial 15

… and options in the Redial list 15

The Phone Book (memory

dialling) 17

To open the Phone Book 17

To store a number 17

… and to mark a Phone Book entry as a

VIP 18

… and to store a Phone Book entry for

speed dialling 19

To make a memory call (short-cut

method) 19

To make a memory call (Phone Book

method) 19

To make a Speed Dial call 20

To change a stored number 20

To delete a Phone Book entry 21

To delete all Phone Book entries 21

Caller Display 22

To review Caller Display records

(short cut) 23

To review all call information 23

Options in the Caller Display lists 24

to delete entries from the list 24

to store a number in the Phone Book 24

Using a multi-handset system 25

To make an intercom call 25

To end an intercom call 25

To transfer a call 26

To shuttle between two calls 26

To set up a three-way conference

To page all handsets from the

base unit 27

continued overleaf …

In standby mode 8

In idle mode 8

Handset registration 28

To re-register or to register a new

handset 28

To register to an extra base unit 29

To de-register a handset 29

To select a base unit 30

To register to a different brand of

base unit 31

SMS text messaging 32

Caller Display 32

Registering for the SMS service 32

The SMS Send and Receive numbers

SMS message boxes 33

To write and send a text message

To read your messages 36

… and to store a caller’s number in the

Phone Book 37

… or to delete messages from the Inbox

To reply to a message 38

To delete a message from the

Outbox or Drafts Box 38

To check or change the Send and

Receive numbers 39

Quick reference guide to the

menus 40

Handset menus 41

Base unit menus 43

Extra menu 46

Alarm setting, Calendar, Countdown

timer, Display settings (clock and

wallpaper), Games

Troubleshooting 47

Cleaning and care 54

Technical details 55

Index 56

Contents

Connection and conditions for use

You can connect your DECT 1915/1915+1 to a direct exchange line (DEL) —

a line connected to a local exchange, with its own phone number; to an

extension socket connected to a DEL; or to an extension on an

approved compatible PBX. Do not connect the DECT 1915/1915+1 as an

extension to a payphone.

The ringer equivalence numbers (RENs) of all instruments (phones,

fax machines, etc.) connected to an exchange line must not add up to

more than 3 — otherwise, one or more of them may not ring and/or

answer calls correctly. The DECT 1915/1915+1 has a REN of 1, and most

other telephones have a REN of 1 unless marked otherwise.

Warranty 58

Read these notes first

Choosing a site

for the base

unit and

charger pod

The base unit and charger pod(s) should be placed on a

level surface, in a position where:

■the mains adapter plug will reach an easily accessible

240-V

AC switched mains supply socket — never try

to lengthen the mains power cable

■the base unit’s telephone line cable will reach your

telephone line socket or extension socket (the charger

pod does not have a telephone line connection)

■it is not close to another telephone — this can cause

radio interference

■it is not close to a sink, bath or shower, or anywhere

else where it might get wet

■it is not close to other electrical equipment — fridges,

washing machines, microwave ovens, fluorescent

lights, TVs etc.

!If you’re using the SMS text messaging facility,

please note that only one SMS phone connected to

the line can receive messages. So you shouldn’t

connect another SMS-compatible phone to the same

line as your DECT 1915/1915+1.

Radio signals

between

handset and

base unit

To use your handset and base unit together, you must

be able to establish a radio link between them. Be

aware that:

■Any large metal object — like a refrigerator, a mirror

or a filing cabinet — between the handset and the

base unit may block the radio signal.

■Other solid structures, like walls, may reduce the

signal strength.

Mains power

connection IMPORTANT — The DECT 1915/1915+1 base unit and

charger pod must be used with the mains adapter

supplied with the unit. Using any other adapter will

invalidate any approval given to this apparatus.

Installation and set-up

Choose a suitable site for the

base unit See page 3

Plug the mains adapter into a240 VAC, 50 Hz mains

socket, with the switch on the socket set to OFF

Connect the mains

power lead and the

telephone line cord

into the underside of

the base unit

Use the telephone line

cord supplied with your

DECT 1915/1915+1 — do

not use any other

telephone line cord

See the note

on page 3

4Switch on at the mains socket

Installation and set-up

Fit the rechargeable batteries in each handset

A+

–

. Fit the two batteries as shown,

making sure you match the and

ends to the markings in the

battery compartment

B. Fit the battery compartment

cover, sliding it into place

and pressing firmly to make

sure it is secure

Battery safety

—

DON’T use non-rechargeable

batteries in the handset they may

burst, causing damage. Use the

rechargeable batteries supplied.

5Plug the mains adapter into a240 VAC,

50 Hz mains socket, with the switch on

the socket set to OFF

Switch on at the mains socket

If you have one or more charger pods …

See the note

on page 3

Installation and set-up

8Charge the batteries for 15 hours

The battery charge level symbol should

increase by one bar every half hour when

you’re charging an empty battery. If you

think that the symbol isn’t showing the

correct battery charge level, remove and

refit the batteries.

Keeping the batteries charged

When you don’t need to use the

handset (for example, overnight or

when you go out), replace it on the

base unit or charger pod, to keep the

batteries charged.

Whenever the battery charge level

symbol shows ‘nearly empty’( ),

place the handset on the base unit or

charger pod to charge the batteries.

Before you use the handset for the first time,

it’s important to charge the batteries fully.

The handset ‘beeps’ when it’s correctly in

position on the charging cradle.

Leave the handset on the charging cradle

for 15 hours.

Make sure mains power is

switched on at the socket if you

want to use the phone — it will

not work without electrical power

Connect the base unit to the telephone line

Switch off power at the mains socket

Insert the telephone line plug into the

socket as shown

Switch mains power back on

Use the plug

to raise the

shutter before

pushing it

into the

socket

NOTE: the charger pod does not have

a connection to the telephone line.

The Charge

light comes on.

Battery charge

level symbol

AUSTRALIA

NEW ZEALAND

Before you start

Electrical

safety ■DON’T let the base unit or charger pod get wet.

Electrical equipment can cause serious injury if used

while you are wet or standing in water.

■If the base unit or charger pod ever falls into water,

DON’T retrieve it until you have unplugged the power

lead from the mains and the telephone line plug from

the telephone socket (base unit only); then pull it out by

the unplugged cables.

■NEVER use your DECT 1915/1915+1 outdoors during a

thunderstorm — unplug the base unit from the

telephone line and the mains socket when there are

storms in your area. Damage caused by lightning is not

covered by the guarantee.

Interference If the sound quality gets worse as you move around

while on a call, this is probably caused by interference

between the handset and the base unit, perhaps

because you are too near to another phone or other

electrical equipment.

Move to a different position to clear the interference.

If you do not move, your call may be cut off.

!Radio interference in the environment may occasionally

cause a short break in the link between the handset

and the base unit while you are on a call. The handset’s

display may briefly show No Base Found until the link

is restored.

‘Out of range’

warning If you hear a warning tone during a call, and/or the

sound in the earpiece becomes faint or distorted, you

may be going out of range of the base unit. Move

nearer to the base unit within 20 seconds, until the

tone stops. Otherwise, your call may be cut off.

BASIC USE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden EXP920 Bedienungsanleitung

Uniden

Uniden EXAI978 - EXAI 978 Cordless Phone Service-Handbuch

Uniden

Uniden TRU9260 - TRU 9260 Cordless Phone Bedienungsanleitung

Uniden

Uniden TRU9280 Series Bedienungsanleitung

Uniden

Uniden EXAI2980 Series Bedienungsanleitung

Uniden

Uniden D1660 Bedienungsanleitung

Uniden

Uniden ELITE 9005 Bedienungsanleitung

Uniden

Uniden XDECT 8005WP Series Bedienungsanleitung

Uniden

Uniden DXI986-2 Series Service-Handbuch

Uniden

Uniden D3280 Bedienungsanleitung

Uniden

Uniden EXT3165 Bedienungsanleitung

Uniden

Uniden EXI8560 - EXI 8560 Cordless Phone Bedienungsanleitung

Uniden

Uniden EXA 3245 Series Bedienungsanleitung

Uniden

Uniden EXV 98 Bedienungsanleitung

Uniden

Uniden WDSS 5355 Series Bedienungsanleitung

Uniden

Uniden DECT2088 - DECT 2088 Cordless Phone Base... Bedienungsanleitung

Uniden

Uniden TRU 8866 Series Service-Handbuch

Uniden

Uniden DECT2088 - DECT 2088 Cordless Phone Base... Bedienungsanleitung

Uniden

Uniden EXI4246 - EXI 4246 Cordless Phone Bedienungsanleitung

Uniden

Uniden EZAI2997 Series Service-Handbuch

Uniden

Uniden TRU9465 Series Bedienungsanleitung

Uniden

Uniden TRU9360 Series Bedienungsanleitung

Uniden

Uniden XCA550/55 Bedienungsanleitung

Uniden

Uniden EXI960 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Furuno

Furuno FM-4721 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch