Uniden EXI2960 Bedienungsanleitung

2960_eng combined.qxd 1/22/01 11:50 AM Page 1

Welcome Congratulations on your purchase of the Uniden EXI2960 (white) or EXI2965 (charcoal)

cordless telephone. This phone is designed and engineered to exacting standards for

reliability, long life, and outstanding performance.

Note: Some illustrations in this manual may differ from the actual unit for

explanation purpose.

Features •900 MHz Extended Range Technology

•3 Line Backlit Display

•Caller ID and Call Waiting Caller ID

•10 Number Memory Dialing

•Face Up/Face Down Charging

•32 Digit Redial

•Flash and Pause

•Tone/Pulse Dialing

•Page/Find

•7 Hour Talk Time/14 Day Standby Time

•Handset Earpiece and Ringer Volume Control

•Hearing Aid Compatible

•40 Channel Autoscan

The EXI2960/EXI2965 features include AutoTalkTM and AutoStandbyTM. AutoTalk allows

you to answer a call by just removing the handset from the base so you don't have to

waste time pushing buttons or flipping switches. AutoStandby allows you to hang up by

simply returning the handset to the base.

The UltraClear PlusTM true compander circuitry virtually eliminates background noise.

This innovative technology, together with 40 different channels, provides you with the

best possible reception during all your conversations.

To protect you against misbilled calls which might result from your phone being

activated by other equipment, the EXI2960/EXI2965 has Random CodeTM digital security

which automatically selects one of over 65,000 digital security codes for the handset

and base. Also, the AutoSecureTM feature electronically locks your phone when the

handset is in the base.

Be sure to visit our web site: www.uniden.com

Uniden®is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of Uniden America Corporation.

2960_eng combined.qxd 1/22/01 11:50 AM Page 2

Contents

Welcome/Features

Controls and Functions 2

Getting Started

Read this First 3

Checking the Package Contents 4

Setting up the Phone 5

Mounting the Base Unit on a Wall 10

Setting Caller ID Options 12

Entering Your Area Code 13

Basics

Making and Receiving Calls 14

Terminology 14

Adjusting the Handset Ringer and

Earpiece Volume 15

Redial 15

Tone Dialing Switch-over 15

Traveling Out-of-Range 16

Selecting a Different Channel 16

Page 16

Flash and Call Waiting 16

Memory Dialing

Storing Phone Numbers and Names 17

Steps for Entering Names and

Special Characters 18

Making Calls with Memory Dialing 19

Chain Dialing 20

Editing a Stored Name and/or Phone Number 20

Erasing a Stored Name and Phone Number 21

Caller ID Features

Caller ID 22

When the Telephone Rings 22

Viewing the Caller ID Message List 23

Deleting Information from the Caller ID List 23

Using the Caller ID List 25

Additional Information

Changing the Digital Security Code 27

Installing the Beltclip 28

Headset Installation 28

Note on Power Sources 29

Maintenance 29

Troubleshooting 30

General Information 31

Index 33

2960_eng combined.qxd 1/22/01 11:50 AM Page 1

21. Handset retainer clip

22. Base charging contacts

23. Base antenna

24. Status LED

25. Page/find key

26. DC power input

27. Telephone line jack

[ 2 ] C NTR LS AND FUNCTI NS

Controls and Functions

1. Handset antenna

2. Optional headset jack

3. Beltclip holes

4. Handset battery compartment

5. Handset earpiece

6. LCD display

7. Talk key

8. */left cursor ( )/tone key

9. Caller ID key

10. Volume down ▼ key

11. Select key

12. Handset microphone and

ringer speaker

13. Memory (m) key

14. Flash key

15. #/right cursor ( ) key

16. Delete key

17. Volume up ▲key

18. Redial/pause (p) key

19. Channel (chan) key

20. Handset charging contacts

2960_eng combined.qxd 1/22/01 11:50 AM Page 2

GETTING STARTED [ 3 ]

Read this First

This cordless telephone must be set up before use. Follow these steps:

About the digital security code

This cordless telephone uses a digital

security code to prevent unauthorized

access to your base unit. This

security code prevents other cordless

handset from making calls through

your base unit.

A random security code will be

assigned automatically between your

base unit and handset when you

charge the battery pack for the

first time.

If you want to reset the security

code, see page 27.

Step 1 (page 4)

Unpack the telephone and accessories.

Step 2 (page 5)

Next, choose the best location to

set up the base unit.

Step 3 (page 6 to 9)

Then, insert the battery pack into the

handset. Connect the base unit. You

must charge the battery pack for 15-20

hours before plugging into the

telephone line and using the phone.

Step 4 (page 12 to 13)

Finally, set the Caller ID options and

store your area code in the memory to

use the Caller ID service.

Note: Skip the area code setting if your

calling area requires 10-digit dialing.

GETTING STARTED

2960_eng combined.qxd 1/22/01 11:50 AM Page 3

GETTING STARTED[ 4 ]

Checking the Package Contents

• Base unit • Handset • AC adapter • Rechargeable

battery

• Telephone cord

Uniden Parts Department at (800) 554-3988

Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also be

reached on the web at www.uniden.com

Make sure you have received the following items in the package. If any of these items are missing or damaged, contact

the Uniden Parts Department.

Also included:

•This Owner's Manual

•Quick Reference Guide

•Precautions and Important Safety

Instructions/Warranty Information

•Other Printed Material

• Beltclip

2960_eng combined.qxd 1/22/01 11:50 AM Page 4

GETTING STARTED [ 5 ]

GETTING STARTED

Do the following steps:

A. Choose the best location

B. Install the battery pack

A. Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS

AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid excessive moisture,

extremely low temperatures,

dust, mechanical vibration, or shock

Setting up the Phone

Avoid heat sources, such as

radiators, air ducts, and sunlight

Avoid television sets and

other electronic equipment

Avoid noise sources such as a window

by a street with heavy traffic

Avoid microwave ovens

Avoid personal computers

Avoid other cordless telephones

Choose a central location

C. Connect the base unit

D. Choose the dialing mode

•The location should be close to both a phone jack and a continuous power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors, microwave ovens, and

fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna to a vertical position.

•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

2960_eng combined.qxd 1/22/01 11:50 AM Page 5

GETTING STARTED[ 6 ]

Charge the battery pack for at least 15-20 hours before plugging the

phone line into your phone.

1)Press in on the battery cover release and slide the cover down until it

comes off.

2)Connect the battery pack connector observing correct polarity (black and red

wires) to the jack inside the battery compartment.

Do not exert any force on this connection. It could cause damage to the

battery or to the handset. The plastic connectors will fit together in only one

way. Once you are are certain that you have made a good connection, then

insert the battery pack into the battery compartment. Do not pinch the wires.

3)Securely close the battery compartment cover by sliding it up until it snaps

into place.

4)Place the handset on the base. Remove the beltclip, if attached, for face

up charging.

Battery use time (per charge)

From fully charged

•Seven hours continuous use

•Fourteen days when the handset is in the standby mode

B. Install the battery pack

Use only the

Uniden battery

(BT-905) supplied

with your phone.

Replacement

batteries are also

available through

the Uniden Parts

Department.

(See page 4.)

2960_eng combined.qxd 1/22/01 11:50 AM Page 6

GETTING STARTED [ 7 ]

•Even when the

battery pack is

not being used,

it will gradually

discharge over

a long period

of time. For

optimum

performance,

be sure to

return the

handset to the

base unit after

a telephone

call.

•If you must

replace the

battery pack

during a

telephone call,

complete the

replacement of

the battery

pack within

30 seconds,

and you can

return to the

original call.

Low Battery Alert

When the battery pack is very low and needs to be charged, the phone is

programmed to eliminate functions in order to save power. If the phone is not in

use, ¨Low Battery¨appears on the LCD and none of the keys will operate.

If the phone is in use, ¨Low Battery¨flashes and the handset beeps. Complete

your conversation as quickly as possible and return the handset to the base unit

for charging.

Cleaning the Battery Charging Contacts

To maintain a good charge, it is important to clean the battery contacts

on the handset and base unit with a dry cloth or a pencil eraser about

once month. Do not use any liquids or solvents.

The last number dialed in the redial memory, the names and the numbers stored

in the memory locations are retained for up to 30 minutes while you replace the

battery pack.

contacts

C.Connect the base unit

1)Connect the AC adapter to the DC IN 9V jack and to a standard

120V AC wall outlet.

GETTING STARTED

2960_eng combined.qxd 1/22/01 11:50 AM Page 7

GETTING STARTED[ 8 ]

Place the power

cord so that it

does not create a

trip hazard or

where it could

become chafed

and create a fire

or electrical

hazard.

2)Set the base on a desk or tabletop, and place the handset on the base unit as

shown. Remove the beltclip, if attached, for face up charging. (See "Mounting

the Base Unit on a Wall", on page 11.)

3)Then raise the antenna to a vertical position.

4)Make sure that the status LED lights. If the LED does not light, check to see

that the AC adapter is plugged in and that the handset makes good contact

with the base charging contacts.

•Use only the supplied AD-310 AC adapter. Do not use any other AC adapter.

•Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

•The handset

can be placed

up or face

down in the

base for

charging.

•You have to

remove the

beltclip, if

attached for

face up

charging.

5)Connect the telephone line cord to the TEL LINE jack and to a

telephone outlet once the handset is fully charged.

If your telephone outlet isn't modular, contact your

telephone company for assistance.

Modular

•After installing the battery pack in the handset, charge your handset at least

15-20 hours before plugging into the phone line. Once the handset battery

pack is fully charged, connect the telephone line cord to the base and

telephone wall outlet.

2960_eng combined.qxd 1/22/01 11:50 AM Page 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden DECT1363-2 Bedienungsanleitung

Uniden

Uniden WIN1200 Series Bedienungsanleitung

Uniden

Uniden EXAI978 - EXAI 978 Cordless Phone Service-Handbuch

Uniden

Uniden XC600/700 Bedienungsanleitung

Uniden

Uniden MC480 Bedienungsanleitung

Uniden

Uniden EXI 7246 Series Bedienungsanleitung

Uniden

Uniden EXAI398 Series Bedienungsanleitung

Uniden

Uniden TRU 3485 Bedienungsanleitung

Uniden

Uniden EXP 6900 SERIES Bedienungsanleitung

Uniden

Uniden DSS 2455 Bedienungsanleitung

Uniden

Uniden XDECT TE-SSE35 Bedienungsanleitung

Uniden

Uniden EXT 176 SERIES guide Bedienungsanleitung

Uniden

Uniden EXS9005 Bedienungsanleitung

Uniden

Uniden XC3510 Bedienungsanleitung

Uniden

Uniden EX965 Bedienungsanleitung

Uniden

Uniden DECT2088 - DECT 2088 Cordless Phone Base... Bedienungsanleitung

Uniden

Uniden TRU9585 - TRU 9585 Cordless Phone Bedienungsanleitung

Uniden

Uniden DCT5260 Bedienungsanleitung

Uniden

Uniden EXA 8955 Bedienungsanleitung

Uniden

Uniden D1779-BT Bedienungsanleitung

Uniden

Uniden DCX730 Series Bedienungsanleitung

Uniden

Uniden DXI 4286-2 Series Bedienungsanleitung

Uniden

Uniden EXI 3965 Bedienungsanleitung

Uniden

Uniden XS915 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung