Uniden G14xx Series Bedienungsanleitung

Accessory Camera for G14xx Series

Surveillance Systems

What’s in the Box?

1 x Camera

1 x Antenna

1 x Stand

1 x AC Adaptor

Screws and Anchors

FRONT BACK

Outdoor Camera

No Keys/Indicators Function

1Camera Antenna Sends signals to the monitor.

2Light sensor Measures light intensity to activate

IR LEDs for night vision.

3Microphone Receives sounds from the area

near the camera

4PIR sensor Detects motion within camera’s

line of sight.

5Camera Lens Mechanism through which the

camera views surroundings and

records images.

6Infrared LED Infrared LEDs provide viewing in

no/low light conditions.

7Pair Press this button to pair the cam-

era to the monitor.

8Camera stand Connects to the camera to allow

multiple mounting positions.

9Speaker Transmits sound from the monitor

(intercom).

10 Power Input (9V

DC)

Connect to power adaptor.

Installing the Camera

You can mount the camera with the stand on the bottom (for a flat

surface such as a tabletop), on the side (for a wall), or on the top (for the

ceiling).

The following tools are required:

• Electric Drill

• 5mm Drill Bit

• No. 2 Phillips Screwdriver

Mount the Camera Base

1. Hold the base of the camera stand where you want to mount

it and mark the location of the screw holes.

2. Drill holes using the 5mm drill bit.

3. Insert anchors.

4. Use the included screws to attach the base to the wall or

ceiling. You can also screw the base into a flat surface such as

a tabletop if needed.

Before attaching the camera, tug gently on the stand to make

sure it is securely in place.

When you are positioning the camera, you might want to bring the

monitor along; it’s much easier to get the camera into the right position

when you have the monitor handy.

Attach the Camera

1. For each camera, attach the camera bracket to the mounting

screw. You can attach the stand to the top or the bottom of

the camera as needed. Tighten it a few turns, then turn the

camera to face the direction you want.

2. Tighten the camera brace up against the camera to secure it

into place.

3. Unlock the mounting post by turning the wingnut a few turns

to the left.

4. Set the mounting post to the correct angle, then tighten the

wingnut until the post is locked into place.

5. Attach the antenna to the rear of the camera.

Loosen the

wingnut to

unlock the

mounting

post.

Attach the camera

to the mounting

screw and turn it

to the desired

direction.

Adjust the post to

the correct angle,

then tighten the

wingnut to lock the

post into place.

Tighten the brace against

the camera to

secure it

in place.

Power Up the Camera

Connect one end of a DC 9V AC adaptor to the camera’s power

pigtail and plug the other end into a 240 volt AC (standard

indoor) power outlet.

Adjust the camera viewing position, if needed.

If... Try...

there is no camera

picture

Verify that the power supply adaptor for

the camera(s) is plugged in.

the picture quality

is poor

Clean the camera lens.

a white image ap-

pears at night

The camera’s infra-red LED shines due to

the invisible light that reects o surfaces

such as glass, causing white light. Place

the camera on the other side of windows

with the lens side ush against the sur-

face to improve the night vision, or place

the camera in a well-lit area.

Night Vision

This camera has built-in IR LEDs, which provides the camera

with the ability to view images in no/low light conditions. It is

important to use the provided power adaptor (and not the bat-

teries) when using the camera for prolonged periods in low light

conditions.

Pairing Accessory Cameras

If you add cameras, install them and then pair the camera to the

monitor.

1. Press MENU/OK on the Monitor, to bring up the System Menu

screen.

2. Select the Camera option.

3. Select Pair and then press MENU/OK. The Pair screen displays.

The pairing function assigns each camera to a different

channel on the wireless monitor (up to 4 cameras), and is

necessary for configuring additional cameras.

4. Select the channel you want to pair the camera to and press

MENU/OK. The Press Pair Key message screen displays.

5. Within 30 seconds, press the Pair button located on the

camera. Once the camera pairs to the monitor, you can view

the camera transmissions on the monitor.

When you add a new camera to your system, you have to pair

it to the monitor (that is, you have“introduce” the camera and

monitor so they can communicate).

For more details on the G14xx Surveillance System,

please refer to the G14xx Series Owner’s Manual.

Operating frequency range 2.400 ~ 2.4835GHz

TX power 15dBm (typical)

Spread spectrum FHSS

Modulation type GFSK

Data Rate 2 Mbps

Communication range 150ms Line of Sight

Image sensor type

(Manufacturer/Model #)

1/4” color CMOS image sensor

Eective pixel H: 640; V: 480

Image processing MJPEG

Image resolution 640x480 @ 10fps

320x240 @ 20fps

Lens 3.6mm F2.0

Exposure Auto

White balance Auto

Power requirement 9.0Vdc ± 5%

Power consumption 160mA (IR LED O)

350mA (IR LED On)

Operating temp range –10 ~ 50° C

Weatherproof IP65

RoHS Compliance Yes

Camera Housing Material Plastic

SPECIFICATION

G1400

IMPORTANT: Satisfactory evidence of the original purchase is

required for warranty service

Please refer to our Uniden website for any details or warranty durations

offered in addition to those contained below.

Warrantor: The warrantor is either Uniden Australia Pty Limited ABN 58 001

865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the

case may be.

Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser

only that the G1400 (“the Product”), will be free from defects in materials and

craftsmanship for the duration of the warranty period, subject to the limitations

and exclusions set out below.

Warranty period: This warranty to the original retail purchaser is only valid

in the original country of purchase for a Product rst purchased either in

Australia or New Zealand and will expire one (1) year from the date of the

original retail sale.

If a warranty claim is made, this warranty will not apply if the Product is found

by Uniden to be:

A. Damaged or not maintained in a reasonable manner or as recommended in

the relevant Uniden Owner’s Manual;

B. Modified, altered or used as part of any conversion kits, subassemblies or any

configurations not sold by Uniden Aust or Uniden NZ;

C. Improperly installed contrary to instructions contained in the relevant

Owner’s Manual

D. Repaired by someone other than an authorized Uniden Repair Agent in

relation to a defect or malfunction covered by this warranty; or

E. Used in conjunction with any equipment, parts or a system not manufactured

by Uniden.

Parts Covered: This warranty covers the Product and included accessories.

User-generated Data: This warranty does not cover any claimed loss of

or damage to user-generated data (including but without limitation phone

numbers, addresses and images) that may be stored on your Product.

ONE YEAR LIMITED WARRANTY

Statement of Remedy: If the Product is found not to conform to this warranty

as stated above, the Warrantor, at its discretion, will either repair the defect

or replace the Product without any charge for parts or service. This warranty

does not include any reimbursement or payment of any consequential

damages claimed to arise from a Product’s failure to comply with the

warranty.

Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or refund for a

major failure and for compensation for any other reasonably foreseeable loss

or damage. You are also entitled to have the goods repaired or replaced if

the goods fail to be of acceptable quality and the failure does not amount to a

major failure.

This warranty is in addition to and sits alongside your rights under either the

COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER

GUARANTEES ACT (New Zealand) as the case may be, none of which can

be excluded.

Procedure for obtaining warranty service: Depending on the country in

which the Product was rst purchased, if you believe that your Product does

not conform with this warranty, you should deliver the Product, together with

satisfactory evidence of your original purchase (such as a legible copy of the

sales docket) to Uniden at the addresses shown below. You should contact

Uniden regarding any compensation that may be payable for your expenses

incurred in making a warranty claim. Prior to delivery, we recommend that you

make a backup copy of any phone numbers, images or other data stored on

your Product, in case it is lost or damaged during warranty service.

UNIDEN NEW ZEALAND LTD

Service Division

150 Harris Road, East Tamaki

Auckland 2013

Phone: (09) 273 8377

Email: [email protected]

UNIDEN AUSTRALIA PTY LTD

Service Division

345 Princes Highway,

Rockdale, NSW 2216

Phone: 1300 366 895

Email: [email protected]

Inhaltsverzeichnis

Andere Uniden Sicherheitssystem Handbücher

Uniden

Uniden UDW-10003 Benutzerhandbuch

Uniden

Uniden UDW20553 Service-Handbuch

Uniden

Uniden UDW20553 Bedienungsanleitung

Uniden

Uniden G1410 Bedienungsanleitung

Uniden

Uniden UWS1113 Bedienungsanleitung

Uniden

Uniden UDW10055 Bedienungsanleitung

Uniden

Uniden UDR744 Bedienungsanleitung

Uniden

Uniden UDW10055 Service-Handbuch

Uniden

Uniden Guardian G955 Bedienungsanleitung

Uniden

Uniden UDW20055 Bedienungsanleitung

Uniden

Uniden Guardian UDRC57 Bedienungsanleitung

Uniden

Uniden Guardian G455 Bedienungsanleitung

Uniden

Uniden GDVR 43 Series Bedienungsanleitung

Uniden

Uniden UDW-10003 Bedienungsanleitung

Uniden

Uniden GSHC1000 Series Bedienungsanleitung

Uniden

Uniden UDW20553 Benutzerhandbuch

Uniden

Uniden G7404D1 Bedienungsanleitung

Uniden

Uniden WDVR4-2 HDD Bedienungsanleitung

Uniden

Uniden UDW-10003 Service-Handbuch

Uniden

Uniden G2701 Bedienungsanleitung

Uniden

Uniden G37 Series Bedienungsanleitung

Uniden

Uniden GnVr 85XX series Bedienungsanleitung

Uniden

Uniden G17xx Series Bedienungsanleitung

Uniden

Uniden GDVR 10 Series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung