Uniden G17xx Series Bedienungsanleitung

Accessory Camera for G17xx Series

Surveillance Systems

What’s in the Box?

1 x Camera

1 x Antenna

1 x Stand

1 x AC Adaptor

1x Extension Cable

Screws and Anchors

Outdoor Camera

No Keys/Indicators

1 Antenna

2 Link LED (Green)

3 Power LED (Red)

4 Camera Lens

5 Light Level Sensor

6 IR LED (25)

7 Camera Stand

8 Pairing button

9 Power Jack

10 Microphone

11 Power Adaptor

The cameras included with your monitor are weatherproof and

have an IP66 weather rating. Water can be sprayed on them and

they will still work; however, the cameras cannot be submerged

underwater.

Although the cameras can be exposed directly to the rain, it is

recommended that, if they are used outdoors, they be mounted

under some type of cover like a patio overhang or eave. As rain-

water drops start to dry on the camera glass, it can create spots

that will reect the light from the infrared LEDs used for night

vision, thus causing lower quality video.

Also, as dust, grime, and cobwebs accumulate on the camera

glass, they can reect light from the infrared LED and might

lower video quality. Periodically, clean the lens glass with a soft

cloth.

General Placement Considerations

Consider the following when placing the camera:

• Clear line of sight video transmission distance is up to 150ms.

- Walls, especially brick and concrete, shorten the transmission

distance.

- Placement next to windows allows better transmission.

• Avoid having a direct light source in view of the camera. This

includes street lights, ceiling or oor lamps, spotlights in the

driveway, etc.

• The cameras are equipped with built-in infra-red LEDs so you

can use night vision for 24-hour surveillance. The LEDs au-

tomatically activate at night and the picture viewed turns to

black and white. The night viewing range is up to 5 ms. Avoid

pointing the camera lens directly at clear glass; the night vi-

sion LEDs will cause a blurred image.

• Optimized motion detection range is up to 1.8ms. The farther

away an object is, the less accurate the motion detection.

Set Up the Camera

• Avoid pointing the camera directly at any bushes, tree branch-

es, or moving objects that might naturally move due to winds.

Otherwise, the motion detection feature may record unneces-

sarily.

Installing the Camera

You can mount the camera with the stand on the bottom (for a

at surface such as a tabletop), on the side (for a wall), or on the

top (for the ceiling). When you are positioning the camera, you

might want to bring the monitor along; it’s much easier to get

the camera into the right position when you have the display

handy.

The following tools are

required:

• Electric Drill

• 5mm Drill Bit

• 15mm Drill Bit

• No. 2 Phillips Screwdriver

Mount the Camera Base

1. Hold the base of the

camera stand where you want to mount it and mark the

location of the screw holes.

2. Use the included screws to attach the base to the wall or

ceiling. You can also screw the base into a flat surface such as

a tabletop if needed.

3. Before attaching the camera, tug gently on the stand to make

sure it is securely in place.

Attach the Camera

1. For each camera, attach the camera bracket to the mounting

screw. You can attach the stand to the top or the bottom of

the camera as needed. Tighten it a few turns, then turn the

camera to face the direction you want.

2. Tighten the camera brace up against the camera to secure it

into place.

3. Unlock the mounting post by turning the wingnut a few turns

to the left.

4. Set the mounting post to the correct angle, then tighten the

wingnut until the post is locked into place.

5. Attach the antenna to the rear of the camera.

Loosen the

wingnut to

unlock the

mounting

post.

Attach the camera

to the mounting

screw and turn it

to the desired

direction.

Adjust the post to

the correct angle,

then tighten the

wingnut to lock the

post into place.

Tighten the brace against

the camera to

secure it

in place.

Power Up the Camera

1. Connect one end of an AC adaptor to the camera’s power

pigtail and plug the other end into a 240 volt AC (standard

indoor) power outlet. (If necessary, connect the extension

cord to the camera’s pigtail and connect the AC adaptor to

the extension cord.)

2. Make sure the

Power status

light turns on. If it doesn’t, try

reconnecting the AC adaptor, and make sure the power outlet

isn’t controlled by a wall switch.

Be sure the power plug and the connector are tightly twisted

together to avoid water leaking in.

Pairing Accessory Cameras to the Monitor

To pair the camera to the G17xx Series monitor, follow the steps

below.

1. Press Mand access the main menu. Then select

Camera

Setup

and press

. Scroll to the camera number you want to

assign to the new camera. Press

2. Press

CH+

to scroll to the pairing option. Press

to pair the

camera.

3. Within 30 seconds, press the

PAIRING

button on the

camera’s power cord.

Pairing Button

For more details on the G17xx Surveillance System, please

refer to the G17xx Series Owner’s Manual.

SPECIFICATION

CAMERA

Communication Range 150 ms in open space

Camera Resolution 640 x 480

Operating Temperature -10°C ~ +50°C

Operating Voltage DC 5V / 1A

Current Consumption 550mA (max)

Night Vision 5ms

Dimension 123L x 65H x 65W mm

G1700

IMPORTANT: Satisfactory evidence of the original purchase is

required for warranty service

Please refer to our Uniden website for any details or warranty durations

offered in addition to those contained below.

Warrantor: The warrantor is either Uniden Australia Pty Limited ABN 58 001

865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the

case may be.

Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser

only that the G1700 (“the Product”), will be free from defects in materials and

craftsmanship for the duration of the warranty period, subject to the limitations

and exclusions set out below.

Warranty period: This warranty to the original retail purchaser is only valid

in the original country of purchase for a Product rst purchased either in

Australia or New Zealand and will expire one (1) year from the date of the

original retail sale.

If a warranty claim is made, this warranty will not apply if the Product is found

by Uniden to be:

A. Damaged or not maintained in a reasonable manner or as recommended in

the relevant Uniden Owner’s Manual;

B. Modified, altered or used as part of any conversion kits, subassemblies or any

configurations not sold by Uniden Aust or Uniden NZ;

C. Improperly installed contrary to instructions contained in the relevant

Owner’s Manual

D. Repaired by someone other than an authorized Uniden Repair Agent in

relation to a defect or malfunction covered by this warranty; or

E. Used in conjunction with any equipment, parts or a system not manufactured

by Uniden.

Parts Covered: This warranty covers the Product and included accessories.

User-generated Data: This warranty does not cover any claimed loss of

or damage to user-generated data (including but without limitation phone

numbers, addresses and images) that may be stored on your Product.

ONE YEAR LIMITED WARRANTY

Statement of Remedy: If the Product is found not to conform to this warranty

as stated above, the Warrantor, at its discretion, will either repair the defect

or replace the Product without any charge for parts or service. This warranty

does not include any reimbursement or payment of any consequential

damages claimed to arise from a Product’s failure to comply with the

warranty.

Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or refund for a

major failure and for compensation for any other reasonably foreseeable loss

or damage. You are also entitled to have the goods repaired or replaced if

the goods fail to be of acceptable quality and the failure does not amount to a

major failure.

This warranty is in addition to and sits alongside your rights under either the

COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER

GUARANTEES ACT (New Zealand) as the case may be, none of which can

be excluded.

Procedure for obtaining warranty service: Depending on the country in

which the Product was rst purchased, if you believe that your Product does

not conform with this warranty, you should deliver the Product, together with

satisfactory evidence of your original purchase (such as a legible copy of the

sales docket) to Uniden at the addresses shown below. You should contact

Uniden regarding any compensation that may be payable for your expenses

incurred in making a warranty claim. Prior to delivery, we recommend that you

make a backup copy of any phone numbers, images or other data stored on

your Product, in case it is lost or damaged during warranty service.

UNIDEN NEW ZEALAND LTD

Service Division

150 Harris Road, East Tamaki

Auckland 2013

Phone: (09) 273 8377

Email: [email protected]

UNIDEN AUSTRALIA PTY LTD

Service Division

345 Princes Highway,

Rockdale, NSW 2216

Phone: 1300 366 895

Email: [email protected]

Andere Handbücher für G17xx Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Uniden Sicherheitssystem Handbücher

Uniden

Uniden UDW-10003 Bedienungsanleitung

Uniden

Uniden UDW-10003 Service-Handbuch

Uniden

Uniden Guardian G455 Bedienungsanleitung

Uniden

Uniden UDW20553 Benutzerhandbuch

Uniden

Uniden GSHC1000 Series Bedienungsanleitung

Uniden

Uniden WDVR4-2 HDD Bedienungsanleitung

Uniden

Uniden Guardian G455 Bedienungsanleitung

Uniden

Uniden GDVR 20 Series Bedienungsanleitung

Uniden

Uniden G37 Series Bedienungsanleitung

Uniden

Uniden GnVr 85XX series Bedienungsanleitung

Uniden

Uniden GUARDIAN G766 Bedienungsanleitung

Uniden

Uniden UDR780HD Bedienungsanleitung

Uniden

Uniden UDRC24 Bedienungsanleitung

Uniden

Uniden UWS1113 Bedienungsanleitung

Uniden

Uniden G2701 Bedienungsanleitung

Uniden

Uniden Guardian G455 Bedienungsanleitung

Uniden

Uniden UDW20553 Bedienungsanleitung

Uniden

Uniden GDVR 4A Series Bedienungsanleitung

Uniden

Uniden GDVR 42 Series Bedienungsanleitung

Uniden

Uniden UDW-10003 Benutzerhandbuch

Uniden

Uniden G1410 Bedienungsanleitung

Uniden

Uniden UDW10055 Bedienungsanleitung

Uniden

Uniden UDW10055 Service-Handbuch

Uniden

Uniden Guardian G955 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung