Uniden DECT1363 Series Bedienungsanleitung

DECT1363 base

with cordless

handset Battery

cover

Not pictured:

Rechargeable battery

(BT-1007)

AC adapter (PS-0035)

Telephone cord

If any items are missing or damaged, contact our Customer Care Line

immediately. Never use damaged products!

Need help? Get answers 24/7 at our website: www.uniden.com.

If You... Contact Uniden’s... Phone Number

have a question or problem Customer Care Line* 817-858-2929 or

800-297-1023

need a replacement part or an

accessory Parts Department* 800-554-3988

need special assistance due to

a disability Accessibility Help Line 800-874-9314

(voice or TTY)

* During regular business hours, Central Standard Time; see our website for

detailed business hours.



DECT1363 Series User's Guide

What's in the box?

Ft. Worth, Texas UNZZ01108BZ(0)



When using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of fire, electric shock and

injury to persons, including the following:

This unit is NOT waterproof. DO NOT expose it to rain/moisture.

Do not use this product near water, for example, near a bath tub,

wash bowl, kitchen sink or laundry tub, in a wet basement or near a

swimming pool.

Avoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electric shock from

lightning.

Do not use a telephone to report a gas leak in the vicinity of the leak.

Use only the power cord and batteries indicated in this manual. Do

not dispose of batteries in a fire. They may explode. Check with local

codes for possible special disposal instructions.

Do not place the handset in any charging cradle without the battery

installed and the battery cover securely in place.





Dispose of used batteries according to the instructions. Do not open



product.

For more details, see the Important Information section.



What’s in the manual?

............................ 3

Installing Your Phone.................. 3

Geng to Know Your Phone ...... 4

Using the Menu .......................... 6

Using Your Phone ........................ 8

Basics .......................................... 8

Using the Phonebook ............... 10

Finding the Handset.................. 11

............... 11

Chain Dialing............................. 11

Using a Voice Mail Service........ 11

 .............. 12

Solving Problems ...................... 12

AC Adapter and Baery

Informaon ............................ 15

Compliance Informaon........... 16

Warranty (1 Year, Limited) ....... 19

GETTING STARTED



Charge the Baery

Unpack the handset, battery pack,

and battery cover. If you need to

remove the battery cover, press in

on the notch and slide the cover

down and off.

Line up the battery connector with the jack inside the handset.

(The battery connector will only fit one way.)

Push the connector in until it clicks into place; tug gently on the

wires to make sure the battery pack is securely connected.

Replace the battery cover and slide it into place.

Connect the AC adapter to the

AC IN 8V

jack on the base. Set the

plug into the notch.

Plug the other end of the adapter into a standard 120V AC outlet.

Place the handset in the base with the display facing forward. The

display on the handset should light up; if it doesn’t, reseat the

handset or try plugging the AC adapter into a different outlet.



Connect the Telephone Cord

Use the telephone cord to connect the

TEL LINE

jack on the base to a

standard telephone wall jack.

Test the Connecon

Pick up the handset from the cradle and press

Talk

. You should

hear a dial tone, and the display should say Talk.

If you don't hear a dial tone or the display says Check Tel Line,

check the connection between the base and the phone jack.

Make a quick test call. (Press

End

to hang up.)

If you keep hearing a dial tone, try changing to pulse dialing mode.





If there is a lot of noise, see page 13 for tips on avoiding

interference.

Changing from Tone to Pulse Dialing

Your phone communicates with the telephone network in two ways:

tone dialing or pulse dialing. Most telephone companies use tone

dialing. If your phone company uses pulse dialing, you will need to

change your phone’s dial mode.

From the handset, open the menu and select Global Setup. (See

page 6 for details on using the menu.)

Select Dial Mode, then select Pulse. The phone sounds a

confirmation tone.

If you use pulse dialing and you need to send DTMF tones during a call

(if you're using an automated response system, for example), press

to temporarily switch to tone dialing. When the call ends, the phone

automatically returns to pulse dialing mode.





Charging

contacts

FIND

Charging

contacts

FIND

Earpiece

Display

STATUS

PHONEBOOK/

LEFT CALLER ID/

RIGHT

UP/DOWN

Microphone

12-key dial pad

MESSAGES/

MUTE-CLEAR

END

TALK/

FLASH

MENU/

SELECT

REDIAL/

PAUSE

Earpiece

Display

STATUS

PHONEBOOK/

LEFT CALLER ID/

RIGHT

UP/DOWN

Microphone

12-key dial pad

MESSAGES/

MUTE-CLEAR

END

TALK/

FLASH

MENU/

SELECT

REDIAL/

PAUSE

Base key and how it works

 What it does

Find

In standby: page the handset.-

Handset keys/LEDs and how they work

 What it does

Talk/Flash

In standby: start a telephone call (get a dial tone).

During a call: switch to a waiting call.

End

During a call: hang up.

In the menu or any list: exit and go to standby.

Up ( )

In standby: increase the ringer volume.

During a call: increase the audio volume.

In any menu or list: move the cursor up one line.

down ( )

In standby: decrease the ringer volume.

During a call: decrease the audio volume.

In any menu or list: move the cursor down one line.

phonEbook/

lEFT ( )

In standby or during a call: open the phonebook.

In the menu: go back to the previous screen.

During text entry: move the cursor to the left.

CallEr id

/righT

In standby or during a call: open the Caller ID list.

During text entry: move the cursor to the right.

MEnU/

sElECT

In standby: open the menu.

In the menu or any list: select the highlighted item.

rEdial/

paUsE

In standby: open the redial list.

While entering a phone number: insert a 2-second

pause.

MEssagEs/

MUTE-ClEar

( )

In standby: access your voice mail service.

During a call: mute the microphone.

If the phone is ringing: mute the ringer for this call

only.

While entering text: Delete the entered text.

LED What it means

sTaTUs

On: the battery is charging.

Blinking: there are new messages.

Reading the Display

This table shows possible status icons and what they mean. Since the

icons appear based on what you're doing with the phone, you won't

ever see all of these icons at the same time.

Icon What it means

The ringer is turned off and will not ring for new calls.

You have a voice message waiting.

The microphone is muted; the caller can't hear you.

T-coil mode is on (see page 13).

The battery is 1) fully charged, 2) half charged, 3) getting

low, or 4) empty.

[Aa] [aA] Enter 1) capital or 2) lower case letters (see page 7).

Using the Menu

If you open the

menu during a call,

use

lEFT

to back out

of the menu without

hanging up.

If you don't press

any keys for about

thirty seconds, the

handset exits the

menu.



Handset Setup

Day & Time

Global Setup

To open the

menu, press

MENU/SELECT.Press MENU/SELECT

to choose the

highlighted option

press END

to exit the

To go back a

screen, press

PHONEBOOK/LEFT

The cursor

shows the

highlighted

option.

To move the

cursor, use

UP & DOWN.

T-coil

Ringer Tones

Handset Setup

Day & Time

Global Setup

To open the

menu, press

MENU/SELECT.Press MENU/SELECT

to choose the

highlighted option

press END

to exit the

To go back a

screen, press

PHONEBOOK/LEFT

The cursor

shows the

highlighted

option.

To move the

cursor, use

UP & DOWN.

T-coil

Ringer Tones

Handset Setup

T-coil Turn on T-coil mode to reduce noise on some hearing

aids (for more details, see page 13).

Ringer Tones

Choose the handset's ring tone. As you highlight each

ring tone, the phone plays a sample. When you hear

the tone you want, press

MEnU/sElECT

AutoTalk Have the handset answer a call when you pick it up

from the cradle (without pressing any buttons).

Any Key

Answer

Have the handset answer a call when you press any

key on the 12-key dialpad.

Handset

Language Change the display language.

Key Touch Tone Have the keypad sound a tone when you press a key.

Day & Time

Use this menu to set the clock manually. (If you have Caller ID, the

phone sets the day and time from the CID data.) Select the day of week,

then use the number keypad to enter the hour and minutes in HHMM

format (e.g., enter 0345 for 3:45). Use

down

to select AM/PM.

Global Setup

Dial Mode Change the way your phone communicates with the

telephone network (see page 4).

Edit Voice

Mail

Program your voice mail access number so you can get

messages by pressing one button (see page 11).

VMWI Reset Reset your Visual Message Waiting Indicator to bring it

back in sync with your voice mail service.

Entering Text on Your Phone

Use the 12-key dial pad when you want to enter text into your phone

(a name in the phonebook, etc.).

The phone defaults to a capital letter for the first letter and any

letter after a space; otherwise, it uses small letters.



To switch to all capital letters, press

The phone defaults to all

capital letters first (e. g. ABCabc2) until you enter a blank space or

press

again. (Any time you want to change case, just press

If two letters in a row use the same number key, enter the first letter

and wait a few seconds (or press

righT

); the cursor will move to the

next space. Enter the next letter.

Press

to enter a blank space.

To change a letter, move the cursor to that letter and press

ClEar

erase the letter. Then, enter the new letter.

To erase the entire entry, press and hold

ClEar

Press

to cycle through all available symbols and punctuation.

USING YOUR PHONE

Basics

To do this... Do this...

make a call Dial the number, then press

Talk/Flash

answer a call Press

Talk/Flash

hang up Press

End

or put the handset in the cradle.

mute the microphone

during a call

Press

MEssagEs/MUTE-ClEar

. Press again to

turn the microphone back on.

mute the ringer for this

call only

While the phone is ringing, press

MEssagEs/

MUTE-ClEar

Changing the Volume

Anytime you are listening to the earpiece, press

to increase the

volume and

down

to decrease it.

To set the ringer volume: when the phone is in standby, press

increase the ringer volume and

down

to decrease it. If you turn the

ringer volume all the way down, the ringer turns off.



Using the Caller ID and Redial Lists

Caller ID (CID) is a service available from your telephone provider

that shows the phone number (and sometimes the caller’s name) of

incoming calls. Contact your telephone provider for more information.

 

When a call comes in, the phone displays the

number and name (if available) of the caller.

The phone saves the information for the last

30 received calls to the CID list.

When it’s in standby, the handset shows how

many calls came in since the last time you

checked the CID list.

The handset

remembers the

last 5 numbers

you dialed on it.

To… 

Open the CID list Press

CallEr id/righT

Open the redial list

rEdial/paUsE.

Scroll through the

lists

Press

down

to scroll from newest to oldest.

Press

to scroll from oldest to newest.

Dial a number from

the lists

Highlight the number you want and press

Talk/Flash

Close the lists Press

phonEbook/lEFT

* If the number is a toll or long distance call, but there's no 1at the front of

the CID record, press

to add the 1before dialing.

To select a number, highlight the number and press

MEnU/sElECT

. The

phone gives you the following options:

Delete Entry Erase the number from the list.

Store Into Pb Add the number to the phonebook. The handset prompts

you to edit the name and number.

Delete All (CID list only) Erase all numbers from the list.

Using Call Waing

Call Waiting, a service available from your telephone provider, lets you

receive calls while you are on another call. Caller ID on Call Waiting

(CIDCW) service displays Caller ID information for a waiting call.

If you get a Call Waiting call, the phone sounds a tone and displays any

CID information received from the waiting call. Press

Talk/Flash

switch between the current call and the waiting call; each time you

switch, there is a short pause before you're connected to the other call.



The phone can store up to 30 entries in its phonebook.

To... Press...

Open/close the phonebook

phonEbook/lEFT.

Scroll through the entries

down

(to scroll through the phonebook

from A to Z) or

(to scroll from Z to A).

Jump to entries that start

with a certain letter

the number key corresponding to the

letter you want.

Dial an entry

down

to find the entry you want to

dial, then press

Talk/Flash

Phonebook Menu Opons

Open the phonebook with the phone in standby, then press

MEnU/

sElECT

to open the phonebook menu. Choose one of these options:

Create New Add an entry to your phonebook. The phone prompts you

to enter a name and number.

Delete All Erase all the entries in the phonebook.

If you need the phone to pause before sending the next set of digits,

press

rEdial/paUsE

to insert a 2-second pause. The pause shows as a

in the display.

You can insert as many pauses as you need, but each pause counts

as one of your 20 digits.



Andere Handbücher für DECT1363 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Uniden Telefon Handbücher

Uniden

Uniden TCX950 Series Bedienungsanleitung

Uniden

Uniden EXA2245 Bedienungsanleitung

Uniden

Uniden DS845 Bedienungsanleitung

Uniden

Uniden ELBT 595 Series Bedienungsanleitung

Uniden

Uniden DECT 2005 Series Bedienungsanleitung

Uniden

Uniden Slimline 1260 Bedienungsanleitung

Uniden

Uniden XDECT 6135BTU Series Bedienungsanleitung

Uniden

Uniden DXI5586-3 Series Bedienungsanleitung

Uniden

Uniden GXP 2000 Bedienungsanleitung

Uniden

Uniden D2997 Service-Handbuch

Uniden

Uniden DECT 3015 Bedienungsanleitung

Uniden

Uniden FP100 Bedienungsanleitung

Uniden

Uniden Extend-A-Phone EX945 Bedienungsanleitung

Uniden

Uniden DSS 5855 series Bedienungsanleitung

Uniden

Uniden DXAI5588-3 Series Bedienungsanleitung

Uniden

Uniden DXI5586-3 Series Service-Handbuch

Uniden

Uniden Modro 15 Bedienungsanleitung

Uniden

Uniden Axis EP100 Bedienungsanleitung

Uniden

Uniden D3588 Bedienungsanleitung

Uniden

Uniden CE7203 Bedienungsanleitung

Uniden

Uniden WDECT2385 Bedienungsanleitung

Uniden

Uniden FP204 Bedienungsanleitung

Uniden

Uniden DXAI3288-2 Series Bedienungsanleitung

Uniden

Uniden DSS8955 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung