UNIHOMS T8E Betriebshandbuch
User Manual
Product
8 inch
Control Panel
8”Smart Multi-functional Knob Panel(in-wall)
Chapter 1 Product presentations........................................................3
1.1 Appearance.................................................................................3
1.2 Main Features.............................................................................3
Chapter 2 Product Specifications....................................................... 4
RK3326S Quad core Cortex-A35............................................4-5
Chapter 3 Ports and Specifications....................................................5
3.1 Interface and ports.............................................................. 5-6
3.2 Specifications............................................................................. 7
Chapter 4 Installation instructions.....................................................8
4.1 Installation drawings ........................................................... 8-9
4.2 Wires connection drawing.................................................. 10
Chapter 5 Operation guideline.........................................................11 5.1
Safety Notes*****....................................................................12
5.2 Operation guideline........................................................11-19
TABLE OF
CONTENTS
Chapter 1 Product presentation
1.1 Appearance
1.2 Main Features
● With optional Asian | EU | US back base, one design for
global users, simple inwall installations.
● 8-inch HD LCD, IPS, multi touch screen, double microphones
with noise reduction, built in 2 x 1W speakers,
light sensor, temperature and humidity sensor.
● ZigBee gateway function, APP remote control.
● Control the lights, curtains, air conditioners, and all other
Smart Home devices. Configure smart home scenes in the
APP, turn on the scene mode with one touch on the screen.
Chapter 2 Product Specifications
Chapter 3 Ports and Specifications
3.1 Interface and ports
Option 1 - US Back Base
Option 3 - Asian Back Base
Option 2 - EU | UK | UAE Back Base
3.2 Specifications
Chapter 4 Installation instructions
● Turn off the main power in the electricity box and confirm
the live wire is
not alive with a test pencil.
● Check the wires and make sure the wires are in good
contact with the terminals and no exposed copper wires.
● Seperate the back base from panel by built-in magnetic
force (as shown in the pictures following).
● Connect the live wire to terminal L and neutral wire to
terminal N.
● Fasten the base to the wall box with mounting screws and
fix the smart panel back to the base by built-in magnetic
force.
● Note that the screws should not be fixed too tight during
installation in case any deformation or damage to the screen
and hardware.
● If your smart panel is not flat after installation, do not press
the screen violently, please check the wall box and the base
installation at first.
4.1 Installation drawings
(Taken EU wall boxes installation as an example.)
Note: Make sure the circuit power were cut off before wire
connections!
Circuit breaker used as disconnected device shall be
incorporated in the electrical installation of the building.
Depth of the wall box should be more than 50mm.
4.2 Wires connection drawing
Inhaltsverzeichnis
Andere UNIHOMS Bedienfeld Handbücher
