UnionNet SP2100 Bedienungsanleitung
1
SMARTPHONE BLUETOOTH BARCODE SCANNER
REFERENCE MANUAL
[ SP-2100 ]
** For 1D Laser / 1D CCD / 2D CCD **
UNIONNET
Copyright@2010 UnionNet Co , Ltd
(Version 1.33)
GOMARO s.a.
La Rosaire 5
CH – 1123 Aclens (Switzerland)
Tel: +41 (0)21 869 97 70 Fax : +41 (0)21 869 96 02
www gomaro ch
2
IMPORTANT NOTI ES
Precautions for Use
- Read precautions carefully before using
Before installation
1 Please let this be away from the direct ray of light, heating system like a heater
2 It can be interrupted with magnetics
3 Please do not install this around water
4 It can cause (a)trouble(s) if It drops
When ontrolling,
1 Please do not sprinkle water on it directly and do not clean with benzene,
thinner, or alcohol, etc
2 Please do not touch and look up the beam directly
3 Please do not break it up, fix it up, and reorganize it
4 Please do not use it as a toy of children
5 Please do not spill coffee or drink on it
6 Please contact our Service Center directly when it needs to be fixed
7 Please charge the battery with the Rated Voltage
8 Please use only the Genuine USB cable included, in case of use of PC USB
cable for computer, it can be damaged
You can also connect to ‘ http://www gomaro ch ‘
PRE AUTIONS
3
ONTENTS
BASI FUN TION
1. Precautions ………………………………………………………………………………………………………… 2
2. ontents ……………………………………………………………………………………………………………… 3
3. omposition ………………………………………………………………………………………………………… 4
4. Exterior View ……………………………………………………………………………………………………… 5
5. Battery harging…………………………………………………………………………………………………… 6
How TO USE
6. Turn On / Off & Auto Pairing………………………………………………………………………………… 6
7. Barcode Scan & Firmware ready mode & Scanner reset setting ……………………………….. 7
INSTALLATION (WINDOWS)
8. How to install SP-2100 driver to Windows XP / Vista / Windows ...................................... 8 - 9
APPLI ATION & SYSTEM MENU
9. Available application for SP-2100 testing ……………………………………………………………… 10
10. Battery harging & Reading Barcodes …………………………………………………………… 11-12
11. SP-2100 System Menu ………………………………………………………………………………… 13-16
12. ANDROID UniReaderSPP……………………………………………………………………………… 17-18
13. iOS(iPhone / iPad / iPod touch) Uni-Linker…………………………………………………………… 19
14. Symbology ……………………………………………………………………………………………………… 20
DATA TRANSMISSION TO MOBILES
15-1. Windows mobile………………………………………………………………………………………… 21 -27
15-2. Android (SPP Profile) ………………………………………………………………………………… 28 -31
15-3. Android (HID profile) ………………………………………………………………………………… 32 -34
15-4. iOS (HID profile) ……………………………………………………………………………………… 35 -37
15-5. iOS (MFI profile) ……………………………………………………………………………………… 38 -40
SETTINGS
16. Settings of Barcode Scanner ………………………………………………………………………… 41 - 63
INFORMATION
17. ontact(A/S center) ……………………………………………………………………………………… End
4
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
Barcode Scanner
USB Cable USB Adaptor Lanyard
USB Cigar Jack for CAR (OPTION)
OMPOSITION (SP-2100)
5
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
①MAIN BUTTON: POWER & scan the Barcode
②Down Scroll Button : Checking the barcode data
③Up Scroll Button : Checking the barcode data & enter to System Menu
④LCD Window : Checking the Scanner status & Barcode data in real time
⑤LED : Green / Red LEDs & Checking the scanned Barcode success or not
⑥Mini USB charging port & reset button
⑦Dust Cover for scanner engine
⑧Buzzer
EXTERIOR VIEW
①
②
③ ④
⑤
⑥
⑦
⑧
89mm(L) * 43mm(W) * 19mm(H)
6
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
①
①
BATTERY HARGING & TURN ON/OFF & AUTO Reconnect / Disconnect
Battery harging:
Users can easily use a Cigar Jack or USB cable with
adaptor to charge the SP-2100
Turn On: Put No 1 button about 3 seconds
Turn Off: It will automatically turn off according to
the Power Auto-Off settings
Turn Off (shortcut key): Press the Scan button for
about 7 seconds then it will turn off directly
Auto-Reconnect:
Pls press the “down button” only one time when
the scanner’s pairing is disconnected from the
device Then after about 1 - 2 sec , SP-2100 will be
completely reconnected to the latest device
Disconnect:
Pressing the “down button” about 3 sec when BT is
connected to the device
①
7
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BAR ODE S AN & FIRMWARE READY MODE & S ANNER RESET SETTING
How to scan the Barcodes:
The Barcode data will be indicated with a beep
sound on the OLED Screen, when users press the
Scan Button into the distance of about 10 - 30cm
Firmware Ready Mode:
To upgrade its firmware, users first need to go to a
“firmware upgrade mode” b pressing the scan
button + up button simultaneously, then the LED
will be flashing and it means ready
Scanner Rest:
If user needs to reset the scanner, pls press the
reset button which is located at bottom left of the
scanner
8
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
Windows XP / Vista / Windows 7
WARNING: DO NOT CONNECT SP-2100 SCANNER TO USB PORT PRIOR TO
INSTALLATION
1 Insert SP-2100 Installation CD into our computer’s CD drive.
2 Go to Driver Folder in the CD
3 Click SP-2100 Driver and then try to install the driver at your computer
* You can download the driver at our homepage as follows *
http://www unionnet co kr/eng/products/list_new asp?ref=15&title=Bluetooth Barcode Scanner
NOTES
• If you have any problems, please refer to the Manual Installation section
SP-2100 DRIVER SETUP
Below are the screen images you will see during the installation of SP-2100 Driver
① Try to connect the SP-2100 to the PC using the USB cable
& turn-on the SP-2100 scanner for driver installation ready
②After a few minutes, the [Driver Software Installation] program is automatically run and
select <The Driver folder, you can find it into the CD > SP-2100 Driver, if your PC ask for
a suitable driver, and select the <Next> button
INSTALLATION with Windows XP / Vista / Windows 7
9
③If you see the following message on your PC, then it means that the program is
successfully installed
④User can verify installed COM Port in Device Manager as below
Notes: After installation, if you see either “SP-2100 BARCODE SCANNER (COM5)”
or “AT91 USB to Serial Converter (COM5)”, it means that the installation is successfully
done
10
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
Android
Download and install “UniReaderSPP” and “UniLinker” from the Android Market
UniReaderSPP UniLinker
iPad/iPhone/iPod touch
Download and install “Uni-Linker” from the Apple App Store
AVAILABLE APPLI ATIONS FOR SP-2100 TESTING
Andere Handbücher für SP2100
1
Inhaltsverzeichnis
Andere UnionNet Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
