Unit UT33B Bedienungsanleitung
Page
3
4
5
7
10
11
12
13
13
15
17
20
22
25
27
Title
Overview
Unpacking Inspection
Safety Information
Rules For Safe Operation
International Electrical Symbols
The Meter structure
Functional Buttons
Measurement Operation
A. DC Voltage Measurement
B. AC Voltage Measurement
C. DC Current Measurement
D. Measuring Resistance
E. Diodes and Continuity
Measurement
F. Temperature Measurement
G. Battery Test
Table of Contents (1)
1
Model UT33B/C/D: OPERATING MANUAL
Table of Contents (2)
Title
H. Square Wave Output
General Specifications
Accuracy Specifications
A. DC Voltage
B. AC Current
C. DC Current
D. Resistance
E. Diodes and Continuity
Measurement
F. Temperature
G. Battery Test
H. Square Wave Output
Maintenance
A. General Service
B. Replacing the Battery
C. Replacing the Fuses
Page
28
29
31
31
32
33
34
35
35
36
36
37
37
38
39
2
Model UT33B/C/D: OPERATING MANUAL
Overview
This Operating Manual covers information on safety and cautions. Please read
the relevant information carefully and observe all the Warnings and Notes strictly.
Warning
To avoid electric shock or personal injury, read the “Safety Information” and
“Rules for Safety Operation” carefully before using the Meter.
The Model UT33B, UT33C and UT33D Multimeters (hereafter referred as “the
Meter”) are 3 1/2 digits with steady operations, fashionable design and highly
reliable hand-held measuring instrument. The Meter can measureAC/DC voltage,
AC/DC Current, Resistance, Temperature, Diode and Continuity. It is an ideal
tool for maintenance.
Except where noted, the descriptions and instructions in this Operating Manual
apply to all Model UT33B/UT33C/UT33D.
3
Model UT33B/C/D: OPERATING MANUAL
Open the package case and take out the Meter. Check the following items carefully
to see any missing or damaged part:
In the event you find any missing or damage, please contact your dealer immediately.
Unpacking Inspection
Item
1
2
3
4
Description Qty
1 piece
1 pair
1 piece
1 piece
English Operating Manual
Test Lead
Point Contact Temperature Probe (UT33C only)
Holster
4
Model UT33B/C/D: OPERATING MANUAL
Safety Information(1)
Safety Information
This Meter complies with the standards IEC61010: in pollution degree 2, overvoltage
category (CAT I 600V, CAT II 300V) and double insulation.
CAT. I: Signal level, special equipment or parts of equipment, telecommunication,
electronic, etc., with smaller transient overvoltages than overvoltages CAT. II.
CAT. II: Local level, appliance, PORTABLE EQUIPMENT etc., with smaller transient
overvoltages than CAT. III
Use the Meter only as specified in this operating manual, otherwise the protection
provided by the Meter may be impaired.
5
Model UT33B/C/D: OPERATING MANUAL
Safety Information(2)
In this manual, a Warning identifies conditions and actions that pose hazards to the
user, or may damage the Meter or the equipment under test.A Note identifies the
information that user should pay attention on.
International electrical symbols used on the Meter and in this Operating Manual are
explained on page 10.
6
Model UT33B/C/D: OPERATING MANUAL
l Before using the Meter inspect the case. Do not use the Meter if it is
damaged or the case (or part of the case) is removed. Look for cracks or
missing plastic. Pay attention to the insulation around the connectors.
l Inspect the test leads for damaged insulation or exposed metal. Check
the test leads for continuity. Replace damaged test leads with identical
model number or electrical specifications before using the Meter.
l Do not apply more than the rated voltage, as marked on the Meter, between
the terminals or between any terminal and grounding.
l The rotary switch should be placed in the right position and no any
changeover of range shall be made during measurement is conducted to
Warning
To avoid possible electric shock or personal injury, and to avoid possible
damage to the Meter or to the equipment under test, adhere to the following
rules:
Rules For Safe Operation (1)
7
Model UT33B/C/D: OPERATING MANUAL
prevent damage of the Meter.
l When the Meter working at an effective voltage over 60V in DC or 42V rms
in AC, special care should be taken for there is danger of electric shock.
l Use the proper terminals, function, and range for your measurements.
l Do not use or store the Meter in an environment of high temperature, humidity,
explosive, inflammable and strong magnetic field. The performance of the
Meter may deteriorate after dampened.
l When using the test leads, keep your fingers behind the finger guards.
l Disconnect circuit power and discharge all high-voltage capacitors before
testing resistance, continuity, diodes and current.
l Before measuring current, check the Meter’s fuses and turn off power to
the circuit before connecting the Meter to the circuit.
l Replace the battery as soon as the battery indicator appears. With a low
battery, the Meter might produce false readings that can lead to electric
shock and personal injury.
Rules For Safe Operation (2)
8
Model UT33B/C/D: OPERATING MANUAL
l Remove test leads and temperature probe from the Meter and turn the
Meter power off before opening the Meter case.
l When servicing the Meter, use only the same model number or identical
electrical specifications replacement parts.
l The internal circuit of the Meter shall not be altered at will to avoid damage
of the Meter and any accident.
l Soft cloth and mild detergent should be used to clean the surface of the
Meter when servicing. No abrasive and solvent should be used to prevent
the surface of the Meter from corrosion, damage and accident.
l The Meter is suitable for indoor use.
l Turn the Meter off when it is not in use and take out the battery when not
using for a long time.
l Constantly check the battery as it may leak when it has been using for some
time, replace the battery as soon as leaking appears. A leaking battery
will damage the Meter,
Rules For Safe Operation (3)
9
Model UT33B/C/D: OPERATING MANUAL
International Electrical Symbols
Continuity Test
AC Current
DC Current
Double Insulated.
Low Battery.
Diode.
Fuse.
Safety Rules
Conforms to Standards of European Union.
Earth Ground
AC or DC
10
Model UT33B/C/D: OPERATING MANUAL
Andere Handbücher für UT33B
2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Unit Multimeter Handbücher
Unit
Unit UT81B Bedienungsanleitung
Unit
Unit UT30B Bedienungsanleitung
Unit
Unit TU13BA Bedienungsanleitung
Unit
Unit UT61 series Bedienungsanleitung
Unit
Unit UT131A Bedienungsanleitung
Unit
Unit UT805A Bedienungsanleitung
Unit
Unit UT90C Bedienungsanleitung
Unit
Unit UT58D Bedienungsanleitung
Unit
Unit UT209 Bedienungsanleitung
Unit
Unit UT60F Bedienungsanleitung
Unit
Unit UT601 Bedienungsanleitung
Unit
Unit UT151D Bedienungsanleitung
Unit
Unit VC820 Bedienungsanleitung
Unit
Unit UT8806E Bedienungsanleitung
Unit
Unit UT801 Bedienungsanleitung
Unit
Unit MIE0141 Bedienungsanleitung
Unit
Unit UT803 Bedienungsanleitung
Unit
Unit UT207 Bedienungsanleitung
Unit
Unit UT33B Bedienungsanleitung
Unit
Unit UT-33D+ Bedienungsanleitung
Beliebte Multimeter Handbücher anderer Marken
Gossen MetraWatt
Gossen MetraWatt METRAmax 6 Bedienungsanleitung
PeakTech
PeakTech 4000 Gebrauchs- und Pflegehandbuch
YOKOGAWA
YOKOGAWA 90050B Bedienungsanleitung
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung
Fluke
Fluke 8846A Bedienungs- und Wartungshandbuch
Tempo Communications
Tempo Communications MM200 Bedienungsanleitung
