Unit UT60F Bedienungsanleitung

Page

DC or AC Current Measurement

Measuring Resistance

Testing Diodes

Testing for Continuity

Capacitance Measurement

Frequency Measurement

Model UT60 G: Temperature

Measurement

Functional Button

Rotary Switch

Display Symbols

Measurement Ranges

Model UT60F/G: OPERATING MANUAL

Table of Contents

Title

Overview

Unpacking Inspection

Safety Information

Rules For Safe Operation

International Electrical Symbols

The multimeter Structure

Measurement Operation

D. AC Current

General Specifications

Sleep Mode

Accuracy Specifications

A. DC Voltage

B. AC Voltage

C. DC Current

A. DC Voltage Measurement

B. AC Voltage Measurement

Page

I. 35

C. Replacing the Fuses

Resistance

Diode Test

Continuity Test

Capacitance

Frequency

J. 35

Temperature

Maintenance

Model UT60F/G: OPERATING MANUAL

Title

A. General Service

B. Replacing the Battery

Digital Multimeter Model UT60F/UT60G (hereafter

referred to as “the Meter”) are 3 3/4 digits with steady

operations, fashionable structure and highly reliable

measuring instrument. The Meter uses large scale of

integrated circuit with double integrated A/D converter

as its core and has full range overload protection.

The Meter can measureAC/DC Voltage, AC/DC Current,

Resistance, Capacitance, Temperature, Frequency,

Diodes, Continuity and etc. The Meter adopted advanced

“co-injection” technique in order to provide sufficient

insulation. In addition, the Display Backlight feature

enables user to work in a dim condition.

This Operating Manual covers information on safety and

cautions. Please read the relevant information carefully

and observe all the Warnings and Notes strictly.

Overview

Warning

To avoid electric shock or personal injury, read the

"Safety Information" and "Rules for Safe Operation"

carefully before using the Meter.

Model UT60F/G: OPERATING MANUAL

Unpacking Inspection

Open the package case and take out the Meter. Check

the following items carefully to see any missing or

damaged part:

In the event you find any missing or damage, please

contact your dealer immediately.

Point Contact Temperature Probe

(UT60G only)

5 RS-232C Interface Cable 1 piece

CD-ROM (Installation Guide &

Computer Interface Software) 1 piece

Model UT60F/G: OPERATING MANUAL

Item

Description

English Operating Manual

Test Lead

Test Clip

Qty

1 piece

1 pair

1 piece

Safety Information

This Meter complies with the standards IEC61010: in

pollution degree 2, overvoltage category (CAT. III 1000V,

CAT. IV 600V) and double insulation.

CAT. III: Distribution level, fixed installation, with smaller

transient overvoltages than CAT. IV

CAT IV: Primary supply level, overhead lines, cable

systems etc.

Use the Meter only as specified in this operating manual,

otherwise the protection provided by the Meter may be

impaired.

In this manual, a Warning identifies conditions and actions

that pose hazards to the user, or may damage the Meter

or the equipment under test.

A Note identifies the information that user should pay

attention on.

International electrical symbols used on the Meter and

in this Operating Manual are explained on page 8.

Model UT60F/G: OPERATING MANUAL

Rules For Safe Operation (1)

Warning

To avoid possible electric shock or personal injury,

and to avoid possible damage to the Meter or to the

equipment under test, adhere to the following rules:

l Before using the Meter inspect the case. Do

not use the Meter if it is damaged or the case (or

part of the case) is removed. Look for cracks or

missing plastic. Pay attention to the insulation

around the connectors.

l Inspect the test leads for damaged insulation

or exposed metal. Check the test leads for

continuity. Replace damaged test leads with

identical model number or electrical specifications

before using the Meter.

l Do not apply more than the rated voltage, as

marked on the Meter, between the terminals or

between any terminal and grounding.

l The rotary switch should be placed in the right

position and no any changeover of range shall

be made during measurement is conducted to

prevent damage of the Meter.

l When the Meter working at an effective voltage

over 60V in DC or 30V rms in AC, special care

should be taken for there is danger of electric

shock.

l Use the proper terminals, function, and range

for your measurements.

l Do not use or store the Meter in an environment

of high temperature, humidity, explosive,

inflammable and strong magnetic field. The

performance of the Meter may deteriorate after

dampened.

l When using the test leads, keep your fingers

behind the finger guards.

l Disconnect circuit power and discharge all high-

voltage capacitors before testing resistance,

continuity, diodes, current or capacitance.

Model UT60F/G: OPERATING MANUAL

Rules For Safe Operation (2)

lBefore measuring current, check the Meter’s

fuses and turn off power to the circuit before

connecting the Meter to the circuit.

l Replace the battery as soon as the battery

indicator appears. With a low battery, the Meter

might produce false readings that can lead to

electric shock and personal injury.

l Remove test leads, point contact temperature

probe and RS232C interface cable from the Meter

and turn the Meter power off before opening the

Meter case.

l When servicing the Meter, use only the same

model number or identical electrical specifications

replacement parts.

l The internal circuit of the Meter shall not be

altered at will to avoid damage of the Meter and

any accident.

l Soft cloth and mild detergent should be used

to clean the surface of the Meter when servicing.

No abrasive and solvent should be used to

prevent the surface of the Meter from corrosion,

damage and accident.

l The Meter is suitable for indoor use.

l Turn the Meter off when it is not in use and

take out the battery when not using for a long

time.

l Constantly check the battery as it may leak when

it has been using for some time, replace the

battery as soon as leaking appears. A leaking

battery will damage the Meter.

Model UT60F/G: OPERATING MANUAL

International Electrical Symbols

AC (Alternating Current).

DC (Direct Current).

AC or DC.

Grounding.

Double Insulated.

Deficiency of Built-In Battery.

Continuity Test.

Diode.

Fuse.

Warning. Refer to the Operating Manual.

Conforms to Standards of European Union.

Model UT60F/G: OPERATING MANUAL

The multimeter Structure (see figure 1)

( figure 1)

1 LCD Display

2 Functional Buttons

3 Rotary Switch

4HzVΩInput Terminal:

Input for voltage, frequency, resistance,diode,

capacitance and continuity measurements.

5 COM Input Terminal:

Return terminal for all measurements.

6 Model UT60F:µA mA Input Terminal;

Input for µA and mA measurement.

Model UT60G: mAoC Input Terminal

Input for mA and temperature measurement.

7 10A Input Terminal

Input for A measurement.

Model UT60F/G: OPERATING MANUAL

Rotary Switch

Below table indicated for information about the rotary

switch positions.

Rotary Switch

Position Function

AC or DC voltage measurement

: Resistance measurement

: Diode test

: Continuity test

Capacitance measurement

Frequency measurement

Hz Temperature measurement

(UT60G only)

AC or DC current measurement range

from 0.1µA to 4.000mA (UT60F only)

µA

Model UT60F: AC or DC current

measurement range from 0.01mA to

400.0mA

Model UT60G: AC or DC current

measurement range from 0.01mA to

600.0mA.

AC or DC current measurement

range from 10mA to 10.00A

Model UT60F/G: OPERATING MANUAL

Andere Handbücher für UT60F

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Unit Multimeter Handbücher

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung