Unitech MR350 MKII Handbuch

Ethernet Setup

Software needed:

Network Enabler Administrator v2.6

http://www.ute.com/files/software/38_NetworkEnabler.zip

OnlineCom Manager (or OnlineDll.dll)

http://www.ute.com/files/software/20_OnlineCommManagerSetup.exe

Connecting the Cradle to your Network:

1. 1. Connect an Ethernet cable to your MR350

2. 2. Run Network Enabler Administrator

Network Enabler Administrator:

ٛ.a. Press the scan button to scan for the cradle once it is connected to your

network

ٛ.b. The Network Enabler Administrator software should see the cradle and

the IP address assigned to it. Double click this IP address for a new window

ٛ.c. Click on the “Network” tab and modify the IP address to match the IP

addresses distributed by your router. In this example, the router distributes

1. 10.0.0.x IP addresses. You can enter the Gateway and a DNS Server

1&2 address.

2. d. Now select the “Serial” tab and check the “Modify” box. Now click

on the settings that appear below. A new window will pop up that will allow

user to change baud rate, parity, data bits, stop bits and flow control. The

3. e. Now select the “Operating Mode” tab and check the “Modify” box.

Make a note of the port, usually 4001. In this case it was changed to 3001.

Once all these steps are completed and updated the user can close the

Network Enabler Administrator application.

4. Run OnlineCom Manager or equivalent application that uses the

“OnlineDll.dll”

Set the IP address and port to the settings saved by the Network Enabler

Administrator application.

Once connected, the OnlineCom Manager application will display the

contents of the MR350 on the left side of the screen and the contents of the

Note: If PC contents populate but receive “A:\?” on the left side (portable

side), then press “Refresh” under the left text pane.

Andere Handbücher für MR350 MKII

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Unitech Netzwerk-Hardware Handbücher

Unitech

Unitech MR055 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung