Unitron Moxi Kiss Bedienungsanleitung

Receiver in canal (RIC)

guide

Table of Contents Unitron’s Moxi RIC product line

Moxi Available RIC

ttings

Gain/peak

output (2cc)

Battery

Standard RIC

Power RIC

Super power RIC

45/112 dB

55/126 dB

61/129 dB

312

Warning to hearing healthcare professional: Domes should

never be tted on clients with perforated eardrums, exposed

middle ear cavities, or surgically altered ear canals. In the

case of such a condition, we recommend to use a customized

ear mold. In the unlikely case that any parts remain in the ear

canal aer the removal of the hearing instrument, contact a

physician immediately.

Unitron’s Moxi RIC product line ............................................................2

Measuring for an accurate xReceiver unit.............................................4

Choosing the correct coupling for standard xReceivers ........................6

Choosing the correct coupling for power xReceivers............................. 7

Attaching the retention piece tothe standard or

power xReceiver unit ............................................................................8

Attaching the dome or sleeve mold to the standard xReceiver unit......9

Attaching the power dome to the power xReceiver unit........................9

Attaching the power shell to the power xReceiver unit ....................... 10

Attaching the standard, power or super power xReceiver unit to

MoxiKiss.............................................................................................11

Attaching the standard, power or super power xReceiver unit

to Moxi ............................................................................................... 12

Conguring in Unitron TrueFit soware ...............................................13

Appendix ........................................................................................... 14

Using the Moxi shell removal tool.............................................. 14

Microphone protector replacement ........................................... 16

Moxi Kiss battery door replacement........................................... 16

Moxi battery door replacement...................................................17

How to measure performance in a coupler .................................17

Moxi Kiss programming cable.................................................... 18

Moxi programming cable........................................................... 18

Wax guard replacement and cleaning domes ............................ 19

250 500 1000 2000 4000 8000

-10

100

110

120

Power dome Power dome Power domeSleeve mold Power shell Sleeve mold

cShell cShell cShell

Standard xReceiver Power xReceiver Super power xReceiver

Coupling options Coupling options Coupling options

Open dome Open dome Open domeClosed dome Closed dome Closed dome

cShell

250 500 1000 2000 4000 8000

-10

100

110

120

Open dome

Closed dome

Power dome/sleeve mold

250 500 1000 2000 4000 8000

-10

100

110

120

Open dome

Closed dome

Power dome

To measure for an accurate wire length:

1. Place your head

at the same

horizontal level as

the client’s head

so you are looking

straight into the client’s ear that you wish to t with

the hearing instrument.

2. Hold the measurement tool with the

appropriate blue or red color code

marking (for the le or right ear) with

your thumb placed on the ear diagram.

3. Place the measurement tool on

the top of the ear and in contact

with the skin in the narrow gap

between the head and the pinna.

Keep the horizontal line on the

measurement tool horizontal and level.

Measuring for an accurate xReceiver unit

Choosing the correct xReceiver wire length will ensure

a more accurate, comfortable t. The measurement

tool included in the kit allows for a quick and simple

measurement and has the following features:

Color Code Markings – blue

(le ear) and red (right ear)

color code markings to indicate

which of the client’s ears to

measure.

Horizontal Line Markings – measurements must be

made horizontally with the measurement tool touching

the skin in the gap between the head and the top of the

pinna.

Four Horizontal Sightlines – (0-1-2-3) – to indicate which

wire length you should use for an accurate tting.

Modifying xReceiver wire to improve t

In some cases, you might nd that the

wire of the xReceiver unit does not lie

close to the side of the head or follow

the shape of the ear.

First, ensure the selected dome and

xReceiver unit sizes are appropriate

(see following pages).

If a dierent xReceiver tube does not

t better, you may need to modify the

curvature (bend) slightly using the

steps outlined below.

1. Remove the xReceiver unit from

Moxi.

2. Heat the tube carefully with a hairdryer at a low

setting for a few seconds.

3. Do not use excessive heat to avoid damage to the

electrical components.

4. Bend the tubing into the desired shape and hold

until it has cooled o. Once completely cooled, the

tube will maintain its new shape.

4. Choose the sightline (0-1-2-3) on

the measurement tool that is most

parallel with the top of the opening

of the ear canal. In this example,

the sightline marked 1 would be the most accurate

choice.

5. Make a note of the sightline chosen and then

repeat steps 1-4 on the opposite ear for a binaural

tting.

Note: It is important to measure the opposite ear for a binaural

tting since right and le ear sizes can vary and thus, require

dierent wire lengths.

poor t

(tube does not lie

close to the head)

good t

Choosing the correct coupling for standard xReceivers

Determine the correct dome size based on your otoscopic examination of the ear canal.

Selectthedometypebasedon the audiometric requirements and tting ranges shown on this page.

Allowthedome to t comfortably in the ear canal.

Open dome

Choose for:

•Instant t

•Open t

Considerations:

•Occlusion free

Closed dome

Choose for:

•Instant t

•Semi-occluded t

Considerations:

•Extended tting

range over open

dome

•Some occlusion

Power dome

Choose for:

•Instant t

•Occluded t

Considerations:

•Extended low-

frequency response

•Occlusion

Sleeve mold

cShell

Choose for:

•Custom t

•IntelliVent technology

Considerations:

•Comfort

•Possible occlusion

•Impression required dome

too small

good t

250 500 1000 2000 4000 8000

-10

100

110

120

Open dome

Closed dome

Power dome/sleeve mold

Choosing the correct coupling for power xReceivers

Determine the correct dome size based on your otoscopic examination of the ear canal.

Selectthedometypebasedon the audiometric requirements and tting ranges shown on this page.

Allowthedome to t comfortably in the ear canal.

Open dome

Choose for:

•Instant t

•Open t

Considerations:

•Occlusion free

Closed dome

Choose for:

•Instant t

•Semi-occluded t

Considerations:

•Extended tting

range over open

dome

•Some occlusion

Power dome

Choose for:

•Instant t

Sleeve mold

cShell

Power shell

Choose for:

•Custom t

•IntelliVent technology

Considerations:

•Comfort

•Possible occlusion

•Impression required

250 500 1000 2000 4000 8000

-10

100

110

120

Open dome

Closed dome

Power dome

Attaching the retention piece tothe

standard or power xReceiver unit

The retention piece may be used for ttings with

the open or closed dome depending on the client’s

requirements. The retention piece is optional and

allows for extra security in the ear. The retention piece

can easily be cut shorter to comfortably t into the

client’s concha bowl.

To attach the retention piece

1. Slide the retention piece over the receiver.

2. The retention piece should be secured over the

receiver so it appears as one piece.

Attaching the dome or sleeve mold

to the standard xReceiver unit

1. Hold the xReceiver unit in one hand and the

coupling (i.e. dome or sleeve mold) in the other

hand.

2. Slide the appropriate coupling over the receiver.

3. The xReceiver unit and coupling should t snugly

together.

Attaching the power dome to the

power xReceiver unit

1. Hold the xReceiver unit in one hand and the power

dome in the other hand.

2. Slide the power dome over the receiver.

3. The xReceiver unit and power dome should t

snugly together.

Attaching the power shell to the

power xReceiver unit

Step 1: Removing the housing

(to attach the housing, follow the steps in reverse

order)

1. Use the blue tool to pop out the cover plate.

2. Using the gray tool, twist to the le to release the

locking plate.

3. Remove the housing.

Step 2: Attaching the power shell

(to remove the power shell, follow the steps in reverse

order)

1. Slide on the receiver seal.

2. Slide the receiver into the power shell.

3. Push in the receiver with the back of gray tool.

4. Replace the locking plate.

5. Using the gray tool, twist to the right to lock.

6. Replace the cover plate.

Andere Handbücher für Moxi Kiss

Inhaltsverzeichnis

Andere Unitron Hörgerät Handbücher

Unitron

Unitron uDirect Bedienungsanleitung

Unitron

Unitron Indigo Bedienungsanleitung

Unitron

Unitron Connect SmartFocus Bedienungsanleitung

Unitron

Unitron Max Bedienungsanleitung

Unitron

Unitron uTV 2 Bedienungsanleitung

Unitron

Unitron Element Bedienungsanleitung

Unitron

Unitron Vista Rm 312 Bedienungsanleitung

Unitron

Unitron uMic Bedienungsanleitung

Unitron

Unitron uStream Bedienungsanleitung

Unitron

Unitron Blu Moxi B-RS Bedienungsanleitung

Unitron

Unitron Conversa.NT Bedienungsanleitung

Unitron

Unitron Shine Moda II Bedienungsanleitung

Unitron

Unitron Indigo BTE Bedienungsanleitung

Unitron

Unitron uTV 3 Bedienungsanleitung

Unitron

Unitron uTV Bedienungsanleitung

Unitron

Unitron Unison Digital BTE Bedienungsanleitung

Unitron

Unitron uMic Bedienungsanleitung

Unitron

Unitron Quantum2 HP Bedienungsanleitung

Unitron

Unitron T Insera Pro Bedienungsanleitung

Unitron

Unitron Quantum Pro ITE Bedienungsanleitung

Unitron

Unitron uDirect 2 Bedienungsanleitung

Unitron

Unitron Tandem Bedienungsanleitung

Unitron

Unitron 360 Bedienungsanleitung

Unitron

Unitron uMic Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung