Unitronics Vision OPLC V130 Bedienungsanleitung

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:1Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

Replacing a V130 Display

Before performing these actions, touch a grounded object to discharge

any electrostatic charge.

Avoid touching the PCB board directly. Hold the PCB board by its connectors.

Opening the Controller

1. Turn off the power supply, disconnect, and dismount the controller.

2. The back cover of the controller comprises 4 screws, located in the corners.

Remove the screws, and pull off the back cover.

3.

Hold the I/O PCB board by its top and bottom connectors and steadily pull

the board off.

4. Remove the plastic tabs marked X and Y.

5. Remove the keypad ribbon cable shown in the next figure.

Press the sides of the cable connector and pull it slightly upwards; this releases the cable.

Pull the cable from the connector.

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:2Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

6. Locate the two screws that fasten the CPU board to the controller and remove them.

7.

Hold the main board by Port 1 and by the I/O expansion port, and pull it out of

8. Locate the two screws that fasten the LCD display to the plastic panel and remove them.

9. Remove the LCD display.

Closing the Controller

1. Replace the new LCD display in the correct location, including the fastening screws.

2. Replace the CPU board, including the fastening screws.

3. Replace Keypad ribbon cable, and verify if the cable connectors are locked.

4. Replace the plastic tabs marked X and Y in the correct location.

5. Replace the I/O board.

6. Close the controller by snapping the plastic cover back in its place. If the card is

placed correctly, the cover will snap on easily.

7. Replace the screws in the corners of the back cover.

Andere Handbücher für Vision OPLC V130

1

Inhaltsverzeichnis

Andere Unitronics Controller Handbücher

Unitronics

Unitronics Vision OPLC V130-33-B1 Bedienungsanleitung

Unitronics

Unitronics Vision700 Bedienungsanleitung

Unitronics

Unitronics Vision120 Bedienungsanleitung

Unitronics

Unitronics V130-33-TR6 Bedienungsanleitung

Unitronics

Unitronics Vision V130J-TR34 Bedienungsanleitung

Unitronics

Unitronics Vision OPLC V130-33-TA24 Bedienungsanleitung

Unitronics

Unitronics UniStream 5 inch Bedienungsanleitung

Unitronics

Unitronics UniStream USC-B5-R38 Bedienungsanleitung

Unitronics

Unitronics M90 OPLC Bedienungsanleitung

Unitronics

Unitronics US5-B10-RA28 Bedienungsanleitung

Unitronics

Unitronics Vision V120 Bedienungsanleitung

Unitronics

Unitronics UniStream Built-in Series Bedienungsanleitung

Unitronics

Unitronics Vision V350-35-T2 Bedienungsanleitung

Unitronics

Unitronics UniStream USC-C3-R20 Bedienungsanleitung

Unitronics

Unitronics UniStream Bedienungsanleitung

Unitronics

Unitronics UniStream US5-B5-B1 Bedienungsanleitung

Unitronics

Unitronics Vision 230 Bedienungsanleitung

Unitronics

Unitronics Jazz OPLC JZ20-R10 Bedienungsanleitung

Unitronics

Unitronics UniStream USC-B10-RA28 Bedienungsanleitung

Unitronics

Unitronics Vision OPLC V130-33-T38 Bedienungsanleitung

Unitronics

Unitronics M91-19-R1 Bedienungsanleitung

Unitronics

Unitronics Vision V350-35-TU24 Bedienungsanleitung

Unitronics

Unitronics Vision OPLC V570-57-C30B Bedienungsanleitung

Unitronics

Unitronics Samba OPLC Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung