Universal Electronics Titan Bedienungsanleitung

Titan Remote Control

Users Guide

Pour les instructions en français, veuillez

consulter www.urcsupport.com

Para instrucciones en español, por favor

consulte www.urcsupport.com

PREPROGRAMMED FOR YOUR SET-TOP BOX

Titan OCAP Remote Control.fm Page 1 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

TABLE OF CONTENTS

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Basic Setup: Programming Device Control . . . . . . . . . . . . . . . . . . . . 8

Searching for Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Checking the Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Learning Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Programming a Learned Key . . . . . . . . . . . . . . . . . . . . . . . . . 12

Deleting a Single Learning Key. . . . . . . . . . . . . . . . . . . . . . . . 13

Deleting All Learned Keys in a Specific Mode . . . . . . . . . . . . 13

Programming Channel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Locking All Channel Control to One Device . . . . . . . . . . . . . . 15

Locking Channel Control for Specific Device Modes. . . . . . . 16

Unlocking Channel Control. . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Programming Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Programming a Macro Key. . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Clearing a Macro Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Programming the Master Power Key . . . . . . . . . . . . . . . . . . . 19

Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . 20

Clearing the Master Power Key . . . . . . . . . . . . . . . . . . . . . . . 20

Clearing Custom Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Re-Programming Set-Top Box Control. . . . . . . . . . . . . . . . . . . . . . . 22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 25

Setup Codes for Audio Receivers. . . . . . . . . . . . . . . . . . . . . . 25

Setup Codes for Audio Accessories . . . . . . . . . . . . . . . . . . . . 28

Setup Codes for Cable Boxes/Converters . . . . . . . . . . . . . . . 28

Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setup Codes for DVR/PVR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Setup Codes for Satellite Set-Top Boxes . . . . . . . . . . . . . . . . 34

Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setup Codes for TVs (LCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Setup Codes for TVs (Plasma) . . . . . . . . . . . . . . . . . . . . . . . . 45

Setup Codes for TV/DVD Combos . . . . . . . . . . . . . . . . . . . . . . 46

Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 48

Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Setup Codes for Video Accessories . . . . . . . . . . . . . . . . . . . . 53

Titan OCAP Remote Control.fm Page 2 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

FEATURES

Control Your Home Theater Equipment

The Titan universal remote control comes pre-

programmed to operate the set-top box that is supplied

by your service provider. In addition, Titan can be

programmed to control 4 additional home theater

equipment devices.

Learning

If you would like to add certain control functions to

Titan that exist on another remote control, you can copy

those functions from the original remote to Titan by

following the steps in the LEARNING section of this

Users Guide.

Backlighting

The Titan universal remote control includes a keypad

backlight. This allows for easy key navigation in dark

ambient light conditions. If you wish to disable this

feature, please refer to the BACKLIGHTING section of

this Users Guide.

Volume Lock

You can use the Titan remote control to control your

home theater volume through one designated device,

regardless of the operating mode of the remote. The

default setting for VOLUME LOCK is for the remote to

use the TV to control volume and mute functions.

Channel Lock

You can use the Titan remote control to control your

home theater channel changing through one designated

device, regardless of the operating mode of the remote.

The default setting for Channel Lock is for the STB that

is supplied by your service provider to be used for

channel changing.

Macros

Titan supports the creation of macros, which allow you

to record a sequence of key-presses and store them on

one key. Once a macro is recorded, anytime that key is

pressed, the remote will send out the whole series of

key-press commands relating to the macro. Example:

Once key-press could turn TV on, turn DVD on, turn

audio receiver on, and put receiver in DVD input mode

so your home theater is ready for DVD viewing.

Master Power Macro

The Master Power Macro is a special feature that can be

enabled so that Titan remote control can turn all of your

home theater devices ON or OFF with a single key-press.

Refer to the MASTER POWER MACRO section of the

users guide for instructions to enable this feature.

Titan OCAP Remote Control.fm Page 3 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

FEATURES AND FUNCTIONS

Use the illustration below to locate features on the Titan

Remote Control and then study the Key Charts (on the

next three pages) to learn how they function.

Titan OCAP Remote Control.fm Page 4 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

Key Charts

Key Function

Use SETUP for all programming

sequences.

Press POWER once to turn on or off a

home theater device. For MASTER

POWER control, see “Using the Master

Power Key” on page 19.

Press AUX, DVD, AUD, TV, or STB once to

select a home entertainment device to

control. Each key has a red LED that

blinks each time a key is pressed to

indicate the current operating mode.

Press SKIP BACK to instantly replay the

last 7 seconds of the program you are

watching.

Press LIST once to display a list of

recorded programming on your

DVR/PVR.

Press LIVE to return to watching LIVE

TV.

Use these keys to control playback of

video or audio files relating to

DVR/PVR, DVD, VCR, or CD devices.

Use GUIDE to display the program guide

available from your service provider.

Use MENU to display the options menu

of the home theater device you are

controlling.

Use INFO to display the current channel

and program information.

Use EXIT to directly exit menus, guides,

and applications.

Use DAY+ (or DAY-) to move a day

forward (or back) on your program

guide.

Use the Cursor keys to move the cursor

in the program guide and menu screens

and to navigate within the interactive

service.

Use OK to choose options, PPV events,

and to tune to programs from the

program guide.

SETUP

Titan OCAP Remote Control.fm Page 5 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

Use PAGE+ (or PAGE-) to page up (or

page down) through menu screens and

the program guide.

Use A, B, C, or D as shortcuts to access

additional features available honour

set-top box menu screens, program

guide, and interactive applications.

Use VOL+ (or VOL-) to raise (or lower)

the audio volume.

Press ON DEMAND for direct access to

On-Demand programming and other

interactive services.

Use CH+ (or CH-) to select the next

higher (or lower) channel.

For DVD players, use these keys to skip

forward (or reverse) through chapters.

For amplifiers/receivers, use these keys

to select the next higher (or lower)

preset station.

Press MUTE once to turn sound off;

press again to turn sound back on.

Use FAV to cycle through your favorite

channels stored on your service

provider’s set-top box.

Use the keypad numbers (1-9, and 0) to

directly tune channels (e.g., 09).

For amplifiers/receivers, use the keypad

numbers to select inputs 1 through 10.

In CBL mode, press INPUT to view other

video sources (A or B) instead of cable.

In all other modes, use INPUT to select

an input source for that device.

ress

ASPECT

once to

change the aspect

ratio (4:3 or 16:9) on your STB or TV.

These are macro keys that can be

customized by you or your service

provider.

Key Function

Titan OCAP Remote Control.fm Page 6 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

INSTALLING BATTERIES

1. On the back of the remote control, press your

thumb on the indentation on the battery door

and slide the battery door off.

2. Locate the two (2) enclosed AA batteries.

Match the + and - marks with those in the

battery case, then insert them.

Use PIP ON/OFF to open or close PIP

window.

Use SWAP to swap the primary viewing

channel with the PIP channel. For a

DVR/PVR, SWAP can be used to switch

the active channel tuner.

MOVE

move the PIP window

location.

Press PIP+/PIP- to change the PIP

channel.

Key Function

Titan OCAP Remote Control.fm Page 7 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

3. Slide the battery door back into place. It

should securely fasten to the remote.

NOTE: When batteries need replacement, the active

mode LED will blink 5 times upon each key-

press. Replace the batteries and the unit will

be restored to its full functionality, complete

with your favorite settings.

BASIC SETUP: PROGRAMMING DEVICE

CONTROL

The Titan universal remote control comes pre-

programmed to operate the set-top box that is supplied

by your service provider. In addition, Titan can be

programmed to control four (4) additional home theater

equipment devices.

NOTE: If you have another brand of set-top box that

you wish to control with the STB key, you'll

need to refer to “Re-Programming Set-Top

Box Control” on page 22 of this manual.

NOTE: Please read steps 2 through 5 completely

before proceeding. Highlight or write down

the codes and device you wish to program

before moving on to step 2.

1. Turn on all of the devices that you wish to

control.

4. Use the “Manufacturer’s Codes” starting on

page 25 to locate device type and brand name

for the device you wish to control. Enter the

first five-digit code for your device. If

performed correctly, the mode LED blinks

twice.

4. Test the remote control by pressing any mode

key (e.g., TV). If the batteries are inserted

correctly, the LED (red light) will blink once.

2. On the remote control, press the mode key

that you wish to program once (AUX, DVD,

AUD,or TV, ); it blinks once.

3. Press and hold SETUP until the mode LED

blinks twice.

SETUP

Titan OCAP Remote Control.fm Page 8 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

NOTE: If the selected mode LED emits a long blink,

the entry is invalid. Repeat steps 2 through 4

and try entering the same code again.

NOTE: If the device does not have a POWER key, press

the(Play) key.

Repeat steps 2 through 5 for another mode

and/or key or press and hold SETUP to exit

programming. TV Code

Device Type:___________________

AUD C o de

Device Type:___________________

DVD Code

Device Type:___________________

AUX C o de

6. Device Type:___________________

SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to

the Titan Remote Control after trying all of the codes

listed for your brand, or if your brand is not listed at all,

try searching for your code.

For example, to search for a code for your TV:

5. Aim the remote control at the device and

press POWER once. The device should turn

off. If it does not, repeat steps 2 through 3,

trying each code for your brand until you find

one that works. If it still does not respond, try

searching for the code (“Searching for Your

Code” starting on page 9).

Titan OCAP Remote Control.fm Page 9 Tuesday, May 27, 2008 1:55 PM

www.urcsupport.com

1. Turn on your TV.

4. Enter one of the following four digits:

8. To search for the codes of your other devices,

repeat steps 1 through 6, but substitute the

appropriate key (e.g., AUX, DVD, AUD, or STB)

for the device you are searching for.

2. On the remote control, press TV once; it blinks

once. Then press and hold SETUP until the TV

key blinks twice.

3. Enter 9 9 1. The TV key blinks twice.

COMPONENT TYPE COMPONENT ID #

Set-Top Boxes (Cable, Sat, etc.)

TV 1

DVD/VCR/DVR 2

Audio Devices 3

5. Aim the remote control at the TV and press

POWER once.

6. Press and release the CH+ key continuously,

then stop when the TV turns off.

NOTE: In the search mode, the remote control sends

IR codes from its library to the selected

device, starting with the most popular code

first.

7. Press POWER. The TV should turn on, then

press SETUP to lock in the code.

NOTE: If the TV does not turn on during step 6, then

slowly press and release CH- to go back

through the codes. Press SETUP when the TV

turns on.

SETUP

Titan OCAP Remote Control.fm Page 10 Tuesday, May 27, 2008 1:55 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Universal Electronics Fernbedienung Handbücher

Universal Electronics

Universal Electronics CONTROL 2 Bedienungsanleitung

Universal Electronics

Universal Electronics Apple TV Remote for Video Service Providers Bedienungsanleitung

Universal Electronics

Universal Electronics Potenza ST Bedienungsanleitung

Universal Electronics

Universal Electronics C4000 Bedienungsanleitung

Universal Electronics

Universal Electronics CATALYST 34 Bedienungsanleitung

Universal Electronics

Universal Electronics ATLAS OCAP 5 Bedienungsanleitung

Universal Electronics

Universal Electronics CRICKET Bedienungsanleitung

Universal Electronics

Universal Electronics Potenza ST Bedienungsanleitung

Universal Electronics

Universal Electronics URC2068BC2 Bedienungsanleitung

Universal Electronics

Universal Electronics MTS 2150 Bedienungsanleitung

Universal Electronics

Universal Electronics URC-2054 Bedienungsanleitung

Universal Electronics

Universal Electronics URC-2054 Bedienungsanleitung

Universal Electronics

Universal Electronics Apple TV Remote for Video Service Providers Bedienungsanleitung

Universal Electronics

Universal Electronics Potenza ST Bedienungsanleitung

Universal Electronics

Universal Electronics ATLAS Bedienungsanleitung

Universal Electronics

Universal Electronics ATLAS DVR 5, PVR 5 Bedienungsanleitung

Universal Electronics

Universal Electronics Millenium 4 Bedienungsanleitung

Universal Electronics

Universal Electronics Nevo C3 Bedienungsanleitung

Universal Electronics

Universal Electronics Potenza ST URC66950BA1 Bedienungs- und Wartungshandbuch

Universal Electronics

Universal Electronics Polaris Bedienungsanleitung

Universal Electronics

Universal Electronics COGECO ATLAS DVR 5-DEVICE Bedienungsanleitung

Universal Electronics

Universal Electronics URC2068BC2 Bedienungsanleitung

Universal Electronics

Universal Electronics Watch Remote Control Bedienungsanleitung

Universal Electronics

Universal Electronics URC5110 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung