Universal Remote Control Easy Clicker UR2-211 Bedienungsanleitung

STEP2 Press and hold the [DEVICE]

key for 5 seconds until the

Device LED will blink once

and stays on. Continue to hold

the [DEVICE] key and press

the number key assigned to

your brand in the Quick Set-

up Code Table and release

both [DEVICE] key and the

number key to save the code.

The Device LED will blink

twice to confirm that the code

is stored.

STEP3 Point the remote control at the

component.

STEP4 Press the power button. If it

turns off, it is programmed for

your component. If it does not

turn off, use the Pre-

Programmed 3-Digit code

Method or Scanning Method.

Repeat the steps above for all

components (CBL, TV).

B. Quick Set-up Code Tables

C. Manual Programming

Manual Programming

The remote control can be programmed

by entering a three-digit code number

that corresponds to particular brands

and models of equipment. The three-

digit code numbers are listed in the

code tables sections of this instruction

manual.

STEP1 Turn on the equipment that

you want the remote con-

trol to operate (Cable Box or

TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The corresponding device

LED will turn on indicating

that it is ready to be pro-

grammed. The LED will remain

on for 30 seconds. The next

step must be entered while

the LED is on.

STEP3 Point the remote control

toward the equipment and

enter the three-digit code

number assigned to your

STEP1 Turn on the equipment that

you want the remote control

to operate (Cable Box or TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The device LED will turn on

indicating that it is ready to

be programmed. The LED

will remain on for 30 seconds.

The next step must be enter-

ed while the LED is on.

STEP3 Press the [CH5] or [CH6]

button one at a time or keep

it pressed. The remote will

emit a series of Power

ON/OFF code signals. Release

the [CH5] or [CH6] button

as soon as the equipment

turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER]

button. The equipment

should turn back on. Then

try all of the functions on

the remote control (i.e.

volume, mute, etc.) to ensure

you have the correct code. If

any of the functions do not

operate as they should,

repeat the instructions from

STEP 3 above to continue

the Auto Search Method.

STEP4 Press the same [DEVICE]

brand from the code tables.

If there are more than one

three-digit number listed for

your brand, try one code

number at a time until your

equipment turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER] button.

The equipment should turn

back on. Then try all of the

functions on the remote

control (i.e. volume, mute,

etc.) to ensure you have the

correct code. If any of the

functions do not operate as

they should, repeat the

instructions from STEP 3

above using the next three

digit code number from the

brand list.

STEP4 Store the three-digit code

by pressing the same

[DEVICE] button once again.

The device LED will blink

twice to confirm that the

code has been stored.

D. Auto Search Method

If none of the three digit code numbers

assigned to your brand of equipment

works, or the code table does not list

your brand, you can use the Auto

Search Method to find the correct

three-digit code number for your

equipment by following steps:

Button Functions

Programming the Remote Control

Macro Button

For

future

use

Universal Remote Control, Inc.

www.universalremote.com

OCE-0082E Rev 08 (14/03/14)

UR2-211

Operating Manual

For Easy Clicker

This remote control is designed

to operate most Digital, Analog

Cable boxes, IPTV set top boxes

and TVs.

Introduction

Replacing Batteries

Before you program or operate the

remote control, you must install

two new AA alkaline batteries.

STEP1 Remove the battery com-

partment cover from the

back of your remote control.

STEP2 Check battery polarity

carefully, and install the

batteries as shown in the

illustration below.

STEP3

Replace the battery com-

partment cover.

*Note : In this section, when you are instructed to press a [DEVICE] button, that means you should press either

the CBL or TV button, depending on which device you are programming the remote to operate.

A. Quick Set-Up Method

(Refer to the Section B Quick Set-up table of codes)

STEP1 Turn on the component you want to program. To program your TV, turn on the TV.

0 PACE DTA

1 SA/CISCO, SAMSUNG, PACE DIGITAL

2 MOTOROLA DIGITAL

3 MOTOROLA DTA

4 EVOLUTION DTA

5 CISCO IPTV

6 ADB IPTV

7 TECHNICOLOR

8 AMINO 140/540 IPTV

9 MOTOROLA IPTV

Quick Number

Manufacturer/Brand

CBL

0 SANYO

1 SONY

2 SAMSUNG

3 LG

4 TOSHIBA

5 PANASONIC

6 PHILIPS

7 HITACHI

8 SHARP

9 VIZIO

Quick Number

Manufacturer/Brand

STEP2 Press and hold the [DEVICE]

key for 5 seconds until the

Device LED will blink once

and stays on. Continue to hold

the [DEVICE] key and press

the number key assigned to

your brand in the Quick Set-

up Code Table and release

both [DEVICE] key and the

number key to save the code.

The Device LED will blink

twice to confirm that the code

is stored.

STEP3 Point the remote control at the

component.

STEP4 Press the power button. If it

turns off, it is programmed for

your component. If it does not

turn off, use the Pre-

Programmed 3-Digit code

Method or Scanning Method.

Repeat the steps above for all

components (CBL, TV).

B. Quick Set-up Code Tables

C. Manual Programming

Manual Programming

The remote control can be programmed

by entering a three-digit code number

that corresponds to particular brands

and models of equipment. The three-

digit code numbers are listed in the

code tables sections of this instruction

manual.

STEP1 Turn on the equipment that

you want the remote con-

trol to operate (Cable Box or

TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The corresponding device

LED will turn on indicating

that it is ready to be pro-

grammed. The LED will remain

on for 30 seconds. The next

step must be entered while

the LED is on.

STEP3 Point the remote control

toward the equipment and

enter the three-digit code

number assigned to your

STEP1 Turn on the equipment that

you want the remote control

to operate (Cable Box or TV).

STEP2 Press the [DEVICE] button

and the [OK/SEL] button

simultaneously for 3 seconds.

The device LED will turn on

indicating that it is ready to

be programmed. The LED

will remain on for 30 seconds.

The next step must be enter-

ed while the LED is on.

STEP3 Press the [CH5] or [CH6]

button one at a time or keep

it pressed. The remote will

emit a series of Power

ON/OFF code signals. Release

the [CH5] or [CH6] button

as soon as the equipment

turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER]

button. The equipment

should turn back on. Then

try all of the functions on

the remote control (i.e.

volume, mute, etc.) to ensure

you have the correct code. If

any of the functions do not

operate as they should,

repeat the instructions from

STEP 3 above to continue

the Auto Search Method.

STEP4 Press the same [DEVICE]

brand from the code tables.

If there are more than one

three-digit number listed for

your brand, try one code

number at a time until your

equipment turns off.

*Note: You can verify that you have

selected the correct code by

pressing the [POWER] button.

The equipment should turn

back on. Then try all of the

functions on the remote

control (i.e. volume, mute,

etc.) to ensure you have the

correct code. If any of the

functions do not operate as

they should, repeat the

instructions from STEP 3

above using the next three

digit code number from the

brand list.

STEP4 Store the three-digit code

by pressing the same

[DEVICE] button once again.

The device LED will blink

twice to confirm that the

code has been stored.

D. Auto Search Method

If none of the three digit code numbers

assigned to your brand of equipment

works, or the code table does not list

your brand, you can use the Auto

Search Method to find the correct

three-digit code number for your

equipment by following steps:

Button Functions

Programming the Remote Control

Macro Button

For

future

use

Universal Remote Control, Inc.

www.universalremote.com

OCE-0082E Rev 08 (14/03/14)

UR2-211

Operating Manual

For Easy Clicker

This remote control is designed

to operate most Digital, Analog

Cable boxes, IPTV set top boxes

and TVs.

Introduction

Replacing Batteries

Before you program or operate the

remote control, you must install

two new AA alkaline batteries.

STEP1 Remove the battery com-

partment cover from the

back of your remote control.

STEP2 Check battery polarity

carefully, and install the

batteries as shown in the

illustration below.

STEP3

Replace the battery com-

partment cover.

*Note : In this section, when you are instructed to press a [DEVICE] button, that means you should press either

the CBL or TV button, depending on which device you are programming the remote to operate.

A. Quick Set-Up Method

(Refer to the Section B Quick Set-up table of codes)

STEP1 Turn on the component you want to program. To program your TV, turn on the TV.

0 PACE DTA

1 SA/CISCO, SAMSUNG, PACE DIGITAL

2 MOTOROLA DIGITAL

3 MOTOROLA DTA

4 EVOLUTION DTA

5 CISCO IPTV

6 ADB IPTV

7 TECHNICOLOR

8 AMINO 140/540 IPTV

9 MOTOROLA IPTV

Quick Number

Manufacturer/Brand

CBL

0 SANYO

1 SONY

2 SAMSUNG

3 LG

4 TOSHIBA

5 PANASONIC

6 PHILIPS

7 HITACHI

8 SHARP

9 VIZIO

Quick Number

Manufacturer/Brand

Andere Handbücher für Easy Clicker UR2-211

Inhaltsverzeichnis

Andere Universal Remote Control Fernbedienung Handbücher

Universal Remote Control

Universal Remote Control UR4-EXP Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR-P95TVE Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR5U-8720L Bedienungsanleitung

Universal Remote Control

Universal Remote Control MASTERCONTROL RF20 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Complete Control MX-780i Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR3-SR2 Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR-J2000TVE Bedienungsanleitung

Universal Remote Control

Universal Remote Control AVEX R6 Bedienungsanleitung

Universal Remote Control

Universal Remote Control TOTAL CONTROL FX-1 Bedienungsanleitung

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Aeros MX-850 Bedienungsanleitung

Universal Remote Control

Universal Remote Control COMPLETE CONTROL MX-450 Bedienungsanleitung

Universal Remote Control

Universal Remote Control PHAZR-5 series Bedienungsanleitung

Universal Remote Control

Universal Remote Control ONE FOR ALL 6200CMN Bedienungsanleitung

Universal Remote Control

Universal Remote Control MX-5000 Network Wand Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR3-EXP Bedienungsanleitung

Universal Remote Control

Universal Remote Control Complete Control KP-900 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Bedienungsanleitung

Universal Remote Control

Universal Remote Control MX-5000 Network Wand Bedienungsanleitung

Universal Remote Control

Universal Remote Control PHAZR-5 UR5U-9000 Bedienungsanleitung

Universal Remote Control

Universal Remote Control URC 22?-7 Bedienungsanleitung

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8800L Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung