FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital devices
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable , protection
against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communication. Operation of this equipment in
residential area is likely to cause harmful
interference in which case the user will be required
to correct the interference at this own expense.
The user should not modify or change this
equipment without written approval from company
name. Modification could void authority to use this
equipment.
For the safety reason, people should not work in a
situation which RF Exposure limits be exceeded.
To prevent the situation happening, people who
work with the antenna should be aware of the
following rules:
1).In case the accesspoiont is operating with its integral
antenna, or when oprating with range extender model
under 1), special measures have to be taken: the antenna
must be installed by a professional and situated in a location
4). While the device is working, please do not contact
the antenna.
and human body.
2). When using any other antenna, which is not mentioned
AIN-WB-OD-B, position the system in such a way,
that 20cm seperation can be secured between antenna
where a distance of 1m can be secured towards any human
body. Read the external antenna intallation documentation for
essential details regarding conditions and operation.
3). While installing the antenna in the location, please always
turn off the power of the accesspoint.
2
