Upgrading everyday security iconnect 2 Gebrauchsanweisung
Quick User Guide
Thank you for choosing iConnect wireless intruder control panel. This quick start guide
describes the main user operating actions of the iConnect . To view the full version of the user
manual, please refer to our website www.riscogroup.com.
Full Arm Press
If required, enter your
user code
Partial Arm Press
Perimeter Arm Press
Disarm Enter your user code In addition silences the
siren in an alarm event
Panic alarm Press and hold down +
Fire alarm Press and hold down +
Medical alarm Press and hold down +
Check system troubles Press and scroll the list Additionally silences
any trouble tones
Global Chime Press
Access Menu Mode Press then [User Code]
Service Call Press and hold
Turn On / Off PGM 1/2 / 30 / 31
Service Mode Press and hold
LEDs Indication
In case of System Trouble,
press to identify the
problem.
LED:
Off: System disarmed
Green : System armed
Flashing red : Alarm
OK LED:
Green: Power OK
Yellow: System trouble
Flashing green: Open zone
Flashing yellow: (Slow) Low
battery, (Fast) AC loss
Edit/Delete User Code
1.From the main display press .
2.Enter master code (Default code 1234)
3.Select [4] User Code and press
4.Select a user and press
5. Select [1] Edit Code.
6. Edit the user code or enter 0000
to delete
7. Press
Bypass / Unbypass a Zone
1. From the main display press .
2. Enter master code (Default code 1234)
3. On the Main menu, press [21]
4. Select a zone and press to
toggle
5. To save the status, press
SMS Control Commands
Controlling the System through SMS
SMS Structure: [Free text - Up to 43 characters][#][User Code][Command]
Example: DISARM#1234120
Optional Free Text User Code Command
D I S A R M # 1 2 3 4 1 2 0
Command Code Numbers:
120: Disarm
121: Full arm
122: Part arm
123: Perimeter arm
200: System arm status
030: PGM 1 off
031: PGM 2 off
130: PGM 1 on
131: PGM 2 on
Telephone Control Commands
1. Dial the cellular number of the premises and wait until the system answers and two tones
are heard.
2. Within 15 seconds, enter the Telecontrol Code (code 29). After a tone sounds, press:
3 : Full arm
6: Disarm
7: Extend the call
9: Cancel siren
2: 2 Way Audio
430 / 431: PGM on
530 / 531: PGM off
*#: Disconnect the line
Keyfob
: Full Arm
: Disarm
: Part Arm, PGM
: Perimeter Arm, PGM
+ : Panic alarm (press and hold down)
Register to RISCO Cloud
1. Go to www.riscocloud.com/register
2. Fill in your first name and last name.
3. Enter your email address as Login Name (required for 1st time activation and can be
altered later)
4. Define password (minimum of 6 characters and at least one digit) and confirm.
5. Enter in the 15 digit Panel ID as it appears on the sticker located on the side of the panel.
6. Complete registration form and press the Register Button.
7. To complete registration open the email message received on the email account you
defined as Login Name.
Login to RISCO Cloud
1. Go to www.riscocloud.com.
2. Enter User Name and Password that you supplied during the registration process.
3. Enter Passcode (iConnect User Code).
4. Click the Enter button.
You can also login to RISCO Cloud using your Smartphone: Download
RISCO Cloud app from the Apple App store or from Google Play Store for
android devices.
© RISCO Group 2017. All rights reserved 5IN1571 C
Andere Upgrading everyday security Bedienfeld Handbücher
