Uplift Desk STR045 Bedienungsanleitung

Slim Under Desk Shelf

STR045

Scan QR code for

product webpage

For assembly assistance, visit upliftdesk.com/contact, call 800-349-3839, or email [email protected]

Work Better. Live Healthier

Step 1 - Mark Shelf Attachment

Locations

A. Determine where you would like to install the shelf. It

should be in a location where it won’t interfere with

anything directly under the desktop, such as a keypad,

frame parts, or other accessories. We recommend

ush with the front edge of the desktop for ease of

installation and access.

B. Place the template against the underside of the desk

with the cutout facing the front of the desktop.

C. Align the front edge of the template to be ush with

the front edge of the desktop.

D. Use a pencil or pen to make a mark in the center of

each of the four holes in the template.

Under no circumstances does the manufacturer accept warranty or liability claims for damages caused from

improper use of this product. Please provide these instructions to any new user or owner of the product.

CAUTION: Read all instructions before assembly. Failure to assemble or operate properly may result

in damage or personal injury. Retain manual for future reference.

CAUTION: The recommended weight capacity for the shelf is 75 lb. Do not hang off the shelf, as it

may result in damage or personal injury.

Safety and Warnings

Assembly Instructions

Shelf Installation Template #10 x 5/8” Wood Screw

qty 4

Package Contents

Phillips Screwdriver Drill with 1/8” drill bit

You’ll also need

Cutout

Step 2 - Drill Shelf Attachment Holes

Softer desktop materials such as Laminate, Eco,

Rubberwood, or Acacia do not require drilling mounting

holes. If you have one of these desktops, you can skip to

Step 3.

For harder desktops, follow the steps below to create

mounting holes.

IMPORTANT: DRILL NO DEEPER THAN 1/2” to avoid drilling

through your desktop. To ensure this, wrap a piece of tape

around your drill bit 1/2” from the tip. Stop drilling just

before the tape touches the desktop.

A. Set the template aside. You can keep it if you think

you may move the shelf later, otherwise it can be

discarded.

B. Drill ½” deep pilot holes at the locations marked in

Step 1 using a 1/8” drill bit.

Step 3 - Attach Shelf

A. Desktop thickness should be at least ¾” to

accommodate the included screws. Before inserting

the screws, hold one next to the edge of the desktop

to make sure it will not protrude through the top once

installed.

B. Use a Phillips screwdriver to insert the screws about

¾ of the way into the holes drilled in Step 2 or at the

locations marked in Step 1. Leave about a ⅛” gap

between the underside of each screw head and the

desk surface.

C. Align the large hole in the shelf keyhole slots with the

screw heads and push up against the desktop.

D. Slide the shelf back so that the screws engage with the

keyhole slots and the front of the shelf is ush with the

front edge of the desktop.

0.5”

Tape

SAVE THIS MANUAL

Study this manual carefully. If this product is sold, please provide this

manual to the buyer, installers, or support personnel operating the product.

Work Better. Live Healthier

AI-STR045-1.0

part of the scope of delivery, even if the item is resold. This manual is also available on the

UPLIFT Desk website: upliftdesk.com. This manual is subject to United States copyright law.

upliftdesk.com

[email protected]

800-349-3839

512-614-3152

Step 4 - Shelf Use

Your shelf is now ready to use. It accommodates laptops

(up to 17”), as well as phones, tablets, a wallet, keys, books,

les, or other small ofce accessories

When storing electronics inside the shelf, route the

device’s power and/or data cable through the side or

rear cable pass-throughs in the shelf to keep them

powered, charging, and connected. Cable pass-throughs

also facilitate using a laptop with an external keyboard,

mouse, and monitor.

Be sure to leave enough slack in the cables to access

devices while tethered and allow movement when

mounted to height adjustable desks.

The cable pass-throughs and ventilation slots on the

bottom of the shelf allow devices to remain cool while

powered and running.

Side cable

passthrough

Power cable

passthrough

Side cable passthrough

Ventilation slots

E. Insert the Phillips screwdriver through the screw access

holes in the bottom of the shelf and tighten the screws to

secure the shelf.

Inhaltsverzeichnis

Andere Uplift Desk Rack & Stand Handbücher

Uplift Desk

Uplift Desk ACC305 Bedienungsanleitung

Uplift Desk

Uplift Desk MON001 Bedienungsanleitung

Uplift Desk

Uplift Desk MON042 Bedienungsanleitung

Uplift Desk

Uplift Desk MON020 Bedienungsanleitung

Uplift Desk

Uplift Desk Crestview MON031 Bedienungsanleitung

Uplift Desk

Uplift Desk MON053 Bedienungsanleitung

Uplift Desk

Uplift Desk CPU001 Bedienungsanleitung

Uplift Desk

Uplift Desk ACC304 Bedienungsanleitung

Uplift Desk

Uplift Desk UPL021 Bedienungsanleitung

Uplift Desk

Uplift Desk ACC302 Bedienungsanleitung

Uplift Desk

Uplift Desk ACC301 Bedienungsanleitung

Uplift Desk

Uplift Desk MON020 Bedienungsanleitung

Uplift Desk

Uplift Desk MON054 Bedienungsanleitung

Uplift Desk

Uplift Desk UPL020 Bedienungsanleitung

Uplift Desk

Uplift Desk MON041 Bedienungsanleitung

Uplift Desk

Uplift Desk ACC095 Bedienungsanleitung

Uplift Desk

Uplift Desk MON051 Bedienungsanleitung

Uplift Desk

Uplift Desk ACC055 Bedienungsanleitung

Uplift Desk

Uplift Desk Crestview MON032 Bedienungsanleitung

Uplift Desk

Uplift Desk MON041 Bedienungsanleitung

Uplift Desk

Uplift Desk Zilker Single Monitor Arm Bedienungsanleitung

Uplift Desk

Uplift Desk Crestview MON033 Bedienungsanleitung

Uplift Desk

Uplift Desk Zilker Dual Monitor Arm Bedienungsanleitung

Uplift Desk

Uplift Desk Zilker MON002 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung