Urmet domus 2VOICE 1760/18 Systemhandbuch

DS1760-047B LBT21228

Mod.

1760

VIDEO DOOR PHONE 2VOICE HANDS-FREE WiFi

MONITEUR 2VOICE MAIN-LIBRES WiFi

VIDEOINTERFONO 2VOICE MANOS LIBRES WiFi

Sch./Ref. 1760/18

(white / blanc / blanco)

Sch./Ref. 1760/19

(black / noire / negro)

INSTALLATION HANDBOOK

NOTICE D’INSTALLATION

MANUAL DE INSTALACIÓN

FCC. ID.: REA176018

2DS1760-047B

ENGLISH

1. DESCRIPTION

The video door phones Ref. 1760/18 and Ref. 1760/19 are dedicated to use in 2Voice video door

phone systems.

The main features are:

• 5’’ (Wide Angle) TFT-LCD colour screen;

• backlit soft-touch buttons (*);

• possibility of activating video door phone functions via gesture commands on the IR detector or via

vocal commands (disabled by default);

• possibility of adjusting the audio/video (speaker volume, brightness, contrastand colour)in OSD menu;

• possibilityofcustomisingtheringtoneaccordingtothecallsourcewithachoiceofvedierenttypes;

• possibility of adjusting the ring tone volume;

• call forwarding function to smartphones and tablets;

• video door phone answering machine function (up to 32 video messages);

• users book for intercom calls (up to 32 users, addition of 32 more users to the directory with the 2Voice

Installer Tools app);

• “Clean screen” function;

• “MUTE” function;

• hands-free or push-to-talk mode:

– Hands-free: press the audio button once to start the conversation and once again to end it;

– Push-to-talk: press the audio button to speak to the door unit, release the button to listen.

(*) When a key is pressed an acoustic signal (beep) is provided. This signal is disabled when “MUTE”

function is activated.

2. DESCRIPTION OF COMPONENTS AND FEATURES

15 1516

1. Function keys:

: driveway gate door opener key

: closing the contact between terminals X1 and X2 (max 50 mA @ 24 V )

: closing the contact between terminals Y1 and Y2 (max 50 mA @ 24 V )

: no function

DS1760-047B

: auto-on / video switching key

: special function key

: intercom call key

: left scrolling arrow key

: right scrolling arrow key

: upwards scrolling arrow key

: downwards scrolling arrow key

: switchboard call key

2. Key for activation of secondary functions / display turning on (with green backlighting LED)

3. Raised notches for vision-impaired

4. Pedestrian door opener button (with green / red backlighting LED)

5. Function button (with red backlighting LED)

6. 5” display

7. Microphone

8. IR sensor for gesture commands

9. Micro SD slot

10. Audioon/obutton (with green backlighting LED)

11. Speaker

12. Terminals for connecting to the system

13. Jumper for adjustment of Z line termination (JP3)

14. Jumper for adjustment of device consumption mode (JP2)

15. Jumper for adjustment of power supply type: System BUS or local power supply unit (JP1)

16. Congurationdip-switches (SW1 / SW2) (default):

– no.1ofSW1,denestheoperatingmodeontheWiFionthevideodoorphone;

– 2-8ofSW1,todenetheapartmentnumberinthecolumn;

– 1-2ofSW2,todenethestationnumberintheapartment.

SW1 SW2

= =

Refer to the system booklet for how to set the dip switches.

The video door phone is provided with a built-in hearing aid device, which only works during

video calls. Furthermore, the video door phone is equipped with two raised notches, positioned on the

sides next to the buttons and to help vision-impaired users locate the position of the two

buttons by touch.

4DS1760-047B

3. INSTALLATION

ATTENTION! For proper operation of the Gesture commands, do not install the device in places

where it may be exposed to direct sunlight, as the IR detector is sensitive to light.

• Installtheush-mountingboxMod.503ortheush-mountingboxØ60attheheightindicatedinthe

following drawing.

The ush-mounting box Mod. 503 can be horizontally or vertically installed.

• Fix the bracket to the mounting box as indicated.

• Program the dip-switches and connect the system wires to the terminal boards.

• Fix the door phone to the bracket.

• Removetheprotectivelmfromthedisplay.

• Power on the system.

ATTENTION! Basedonthecolumnaddressconguredonthevideodoorphones,theremaybeadelayin

switching on.

1,50 m

Box Mod. 503

n° 2 M3,5 x 19 mm

provided n° 2 M3,5 x 19 mm

countersunk screws

Box Ø 60 mm

1,50 m

n° 2 screws and screw

anchors included

1,55 m

DS1760-047B

3.1. TERMINAL DESCRIPTION

Left terminal board

V- Terminals for local power supply unit Ref. 1760/110

V+

S- Negative for additional chime

S+ Positive for additional chime

Button

Right terminal board

CP Floor call

PANIC Panic alarm

LINE OUT Power supply BUS output

LINE IN Power supply BUS input

3.2. JUMPER AND DIP-SWITCH SW1 NO.1 (DEFAULT)

JP1

JP2

JP3

6DS1760-047B

JUMPER (JP3)

The following Jumper allows to adjust the line termination (Z) in case of in-out video door phone connection.

The line termination must be inserted into the last video door phone.

JP3

Termination inserted (default)

Termination not inserted

For position of jumpers JP1 and JP2 and dip-switch SW1 no.1 refer to the next chapter of the following

handbook.

4. VIDEO DOOR PHONE PERFORMANCE ACCORDING TO

CONFIGURATION METHOD

Thevideodoorphonecanbeconguratedwith3dierentmethods.Dependingontheselectedmethod,

limitation will be present on the following performance.

Installation type (*)

Performance

Low rise block (Default)

(Power supply from

system BUS with WiFi

always active)

High rise block

(Power supply from

system BUS with

WiFi active after call

forwarding)

Local power

(Power supply from

local power supply unit

Ref. 1760/110)

Jumpers and DIP-

switches

JP1

JP2

SW1 n.1

JP1

JP2

SW1 n.1

JP1

JP2

SW1 n.1

Delay time on

reception of call

forwarding to CallMe

app

No delay 10 seconds No delay

CallMe app auto-on Available Not available Available

Panic alarm signalling

to CallMe App Available Not available Available

Emergency call from

the CallMe App Not available Not available Available

Automatic door

opener timing Not available Available Available

DS1760-047B

Screen displaying

during intercom

and switchboard calls

Not available Not available Available

Vocal commands Not available Not available Available

Simultaneous ignition

of all video door

phones when a call is

received.

Not available Not available Available (#)

Number of video door

phones in riser

Reduction of video door

phone number (*)

Reduction of video

door phone number (*) 127

Display turning on 1 video door phone at a

time in riser

1 video door phone at

a time in riser Unlimited

Display turning on

duration 5 minutes 5 minutes Unlimited

Display timeout time

for inactivity 30 seconds 30 seconds 60 seconds

(*) For the limits of the number of video door entry phone in the riser column, refer to the chapter “Video

door phone installation constraints”.

(#) The service is available if the video door phones in the apartment:

- are powered by a local power supply unit;

- have been connected directly to the LINE 1 ÷ 4 input of a video distributor Ref. 1083/55;

- the “Simultaneous ignition” video parameter has been enabled on all video door phones.

For more details, see the Parameter conguration handbook available by scanning the QR Code on the

last page.

5. VIDEO DOOR PHONE INSTALLATION CONSTRAINTS

Ifthecongurationmode“Lowriseblock”isusedonthe1760/18-/19videodoorphones you can

have a reduction in the number of video door phone in a riser column derived from a column distributor Ref.

1083/53 or a column interface Ref. 1083/50, with the same maximum distances.

Reduction is as follows:

Power supply Cable type Maximum number of video

door phones (Master)

1083/20A

2Voice Ref. 1083/92 16

2Voice Ref. 1083/94 15

CAT5 UTP (one twisted pair) 8

1083/23 2Voice Ref. 1083/92 - /94 5

CAT5 UTP (one twisted pair) 3

ATTENTION! Any additional Slave video door phones Ref. 1760/18 - /19 must be powered with the local

powersupplyunitandconguredinLocal power mode.

8DS1760-047B

For the maximum number of video door phone or for other types of cables, see the booklet “Limit number of

video door phones in riser DS1760-026” on the Urmet website by scanning the following QR Code.

If the video door phone Ref. 1760/18 or /19 is installed as a spare to replace a video door phone, it must be

poweredthroughthelocalpowersupplyandconguredwiththelocal power mode of use.

6. CONTACT INSERTION FOR INTERCOM CALLS

In order to make intercom calls, it is necessary to enter contacts in the video door phone directory. Up to

32 contacts can be entered directly from the video door phone as follows.

Using the 2Voice Installer Tools app, it is possible to add 32 additional contacts to the video door phone

directory managed by the application. For all information on the entry of contacts using the application,

scan the QR Code on the last page of the following booklet and download the Booklet for use of the

2Voice Installer Tools app.

To enter a new contact, proceed as follows:

• Press the key twice when the video door phone is in stand-by mode to turn on the display and

view the Homepage.

For video door phones powered in High rise block and Low rise block, access to the Homepage is

permitted to one device at a time, for a maximum of 5 minutes. If a user tries to access the Homepage

when it is already in use on another device, the video door phone will emit a dissuasion tone (4 beeps)

indicating that the page cannot be displayed at the moment.

• The display shows the following screen:

• Press keys , , and to select the following icon .

• When selection has been made press the key toconrm.

DS1760-047B

• The display shows the following screen:

• Inthecongurationmenupressthekey until selecting “Contacts”.

• Press the key toconrmtheselection.

• To enter an new contact, press the key and select the icon to add a new contact .

• Press the key toconrmanddisplaythefollowingscreen:

10 DS1760-047B

• Thefollowingparametersmustbedenedforeachnewcontact:

1. Contact type

Press the key to select the following icon , then press the key to change the contact type.

• External contact: call to a video door phone in another apartment but within the same video

door phone riser

• Internal contact: call to a video door phone in the same apartment

2. Video door phone ID code

Press the key to select the following icon , then press the key to enter the video door phone

ID code.

• For external contacts, permissible codes range from 0 to 126

• For internal contacts, permissible codes range from 0 to 3

In the conguration menu, under “System information”, it is possible to view the ID code of video

door phones (for more details see the Parameter conguration handbook available by scanning the

QR-Code at the end of the handbook).

Press the keys , , and to select on the virtual keypad the numbers that make up the video

door phone ID code you want to add to the contacts. Press the key toconrmtheselectednumber.

3. Contact name

Press the keys , , and to select the following icon , then press the key

to enter the contact name.

Press the keys , , and to use the virtual keypad and enter the contact name. Press the key

toconrmthecharacterstobeentered.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere urmet domus Gegensprechanlage Handbücher

urmet domus

urmet domus iPerCom Mikra2 1060 Systemhandbuch

urmet domus

urmet domus 1722 Bedienungsanleitung

urmet domus

urmet domus IPercom VOG7 1761 Gebrauchsanweisung

urmet domus

urmet domus 1722/71 Bedienungsanleitung

urmet domus

urmet domus Nexo 1708/1 Bedienungsanleitung

urmet domus

urmet domus IPerCom Bedienungsanleitung

urmet domus

urmet domus mikra2 1060/21 Kurzanleitung

urmet domus

urmet domus 1750/1 Bedienungsanleitung

urmet domus

urmet domus 1051 Bedienungsanleitung

urmet domus

urmet domus 1168/1G Bedienungsanleitung

urmet domus

urmet domus 1139/2 Bedienungsanleitung

urmet domus

urmet domus AIKO 1716/1 Bedienungsanleitung

urmet domus

urmet domus VOG 7 1760 Gebrauchsanweisung

urmet domus

urmet domus 1051/025 Bedienungsanleitung

urmet domus

urmet domus Audio Two Bedienungsanleitung

urmet domus

urmet domus 2VOICE 1083/48 Bedienungsanleitung

urmet domus

urmet domus 1130 Bedienungsanleitung

urmet domus

urmet domus Mini Note + 1722 Gebrauchsanweisung

urmet domus

urmet domus 1033/470 Bedienungsanleitung

urmet domus

urmet domus ED ELEKTA STEEL Kurzanleitung

urmet domus

urmet domus FDi ipassan 2VOICE Bedienungsanleitung

urmet domus

urmet domus mikra plus Installations- und Betriebshandbuch

urmet domus

urmet domus IPerCom VOG 7 1761 Series Installations- und Betriebshandbuch

urmet domus

urmet domus IPERVOICE SYSTEM Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung

urmet domus 2VOICE 1760/18 Systemhandbuch

Beliebte Gegensprechanlage Handbücher anderer Marken