Urmet domus 1093/701 Bedienungsanleitung

DS1093-529

Mod.

1093

DS1093-529

IP KEYBORD

Ref. 1093/701

USER MANUAL

DS1093-529

TABLE OF CONTENTS

1ProductFeatureS..................................................................................................................3

1.1 Opening the package...........................................................................................3

1.2 Warnings..............................................................................................................4

2Panel and Interface Introduction ........................................................................................5

2.1 Front panel and function buttons introduction .....................................................5

2.2 Rear panel interface introduction.........................................................................5

3Keyboard function introduction.........................................................................................6

3.1 Connection...........................................................................................................6

3.2 Power on and add device.....................................................................................6

4Manually add device............................................................................................................7

4.1 PTZ control and image switch..............................................................................8

4.2 Direction control ...................................................................................................8

4.3 Zoom....................................................................................................................8

4.4 Lens control..........................................................................................................8

4.5 Preset operation instruction..................................................................................9

4.6 Special function..................................................................................................10

4.7 Language...........................................................................................................11

4.8 Fig.7...................................................................................................................11

4.9 LED Display .......................................................................................................11

4.10 IP address..........................................................................................................11

4.11 Exception Handing.............................................................................................12

5TechnicalSpecification......................................................................................................13

ENGLISH

DS1093-529

1 PRODUCTFEATURES

This network control keyboard is a powerful three-dimensional with multi-function.

It supports:

5.0 "LED LCD HD real-time display

HDMI output

USB

ONVIF2.4

back-end PTZ.

OSD menu;

1.1 OPENING THE PACKAGE

Check that the packing and the contents are not visibly damaged. Do not attempt to work the unit if

components are missing or damaged. Contact the retailer immediately. Pack the unit in it original packing if

it needs to be replaced.

1.1.1 CONTENTS OF THE PACKAGE

1 keyboard.

1 user’s manual.

1 power supply unit

Important note:

Accessories may be changed without prior notice.

DS1093-529

1.2 WARNINGS

1.2.1 POWER

This device is powered in the range from 100 to 240 VAC. Check the power voltage before

connecting.

Use of an URMET Domus power unit with the required specifications is recommended.

Do not pull the cable to unplug the device.

Important note:

Inverting the polarity may damage the keyboard.

1.2.2 SAFETY PRECAUTIONS

Keep the device away from rain and humidity to prevent the risk of fire and electrocution.

Do not introduce solids or liquids inside the device to prevent the risk of fire and electrocution. If

this should accidentally occur, disconnect the device from the mains and have it inspected by

qualified personnel.

Never open the device. In all cases, contact qualified personnel or the service centre for repairs.

1.2.3 INSTALLATION PRECAUTIONS

Arrange the device in a well-ventilated place to prevent overheating.

For the same reason, do not install sources of heat, such as radiators or hot air ducts. Keep away

from direct sunlight. Do not install in areas subject to excessive dust, mechanical vibrations or

shocks.

Consider the working temperature of the unit (from 5°C to 45°C) and humidity range (from 10% to

90%) before choosing the installation location. High differences in temperature with respect to the

specified working temperature range can damage the unit. Do not install the unit over another unit

which generates heat.

Wait for a while before operating a device immediately after transporting it from a cold place to a

warm place and vice versa. Wait on average for three hours: this will allow the device to adapt to

the new ambient (temperature, humidity, etc.).

Do not arrange this device on an unstable surface, such as a tottering or slanted table. The device

could fall causing injury or mechanical failures.

Do not install the device in a place where it could be exposed to humidity or water. Do not direct a

jet of water onto the device: risk of fire, electrocution or mechanical failure.

Stop using the device if water or other material should penetrate inside: risk of fire and

electrocution. Contact the retailer or authorised installer.

1.2.4 CLEANING THE DEVICE

Rub delicately with a dry cloth to remove dust and dirt.

Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.

Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to

clean the device to prevent deformation, deterioration or scratches to the surface finish.

DS1093-529

2 PANEL AND INTERFACE INTRODUCTION

2.1 FRONT PANEL AND FUNCTION BUTTONS INTRODUCTION

Fig.1

2.2 REAR PANEL INTERFACE INTRODUCTION

Fig.2

Input power : DC12V/2A

Reserved output interface:RS485 (not available)

Power indicator

④USB interface : it is available for connecting mouse to operate network keyboard

⑤RJ45 network interface : through the IP switch to access network

⑥HDMI interface :Used for connecting HD Screen to realize synchronous switch

between

keyboard LED and the HD Screen

DS1093-529

3 KEYBOARD FUNCTION INTRODUCTION

3.1 CONNECTION

Fig.3

As above picture shows, ensure the keyboard in the same LAN with the devices.

3.2 POWER ON AND ADD DEVICE

3.2.1 ADD DEVICE WAY UNDER POWER ON

When the keyboard is powered on normally, the automatic search IP interface will pop up

60min later,

as below:

After IP search finished, the user can move up and down the cursor by joystick, select IP

device

needed to access device, press ”Enter” then can save the device and display the

corresponding IP

image; when the screen displays image normally, then can be realized

to control PTZ of the front

dome.

Fig.4

Remark: The keyboard supports power-off memory function. If re-power the keyboard

and after

finish self-test, it will be restored the IP image as previous power-off.

DS1093-529

3.2.2 AUTOMATIC SEARCH AND MANUALLY ADD DEVICE

After the network keyboard connected to the front-end device, then press “Menu” on

keyboard

panel, then will pop up main menu interface as below:

Fig.5

Choose the “device management”, click “Enter” to the next sub-menu, select “search add”

and confirmation. Please move the cursor to the top to select ”search” and click “enter”,

then can search and add automatically in the network PTZ of all area network.

Select the IP

address of the image, press ”Enter ”to save the corresponding image an

d displayed.

4 MANUALLY ADD DEVICE

When access to other manufacturer’s PTZ, because of the limit of the port and PTZ

log-in

password ,there will exist that IP can’t complete add automatically, then can us

manually

add function now, the operation as below:

Click the “Enter”, select “device management”, “manual add”, enter to the following

interface:

Fig.6

DS1093-529

On the keyboard interface, input and fill in “IP address, port, name, password”, then

press

confirmation , then can display and save corresponding IP images.

Remark: 1. please check IP port, password and other information before manually add

address.

Remark 2. “Menu” button is also the return button.

4.1 PTZ CONTROL AND IMAGE SWITCH

4.1.1 IP CHANNEL SWITCH

As shown above figure 4, the user can switch image channel by the corresponding

S/N with

the left of IP address list.

Press “ ”button under normal image display, and choice the corresponding S/N with

the left of IP address list. Keyboard will switch into the corresponding IP address when

you

press “ ”button. For example, switch into above figure 192.168.1.145 as the

following way:

Please press “ ”button; and press “No.3”; last press “”.

Remark: Image switching except through the keyboard shortcut also can be introduced

into

products through equipment management. Please select the corresponding IP

address and press

“Enter” to save to come true.

4.1.2 ROCKER OPERATION AND LENS CONTROL

On the right side of keyboard, it’s 3D vector rocker. User can easy to control PTZ and

speed.

4.2 DIRECTION CONTROL

User can pass moving rocker to control PTZ in different direction: left, right, up, down, up

left,

down left, up right, down right, rotate.

4.3 ZOOM

Zoom in: Rotating vector rocker in right direction to make the lens closer.

Zoom out:

Rotating vector rocker in left direction to make the lens farther.

4.4 LENS CONTROL

Six buttons to control lens: FOCUS+, FOCUS- ; ZOOM+, ZOOM-; IRIS+, IRIS-. These are

used for

focus, zoom and iris.

Focus:

adjusting the focus distance. It can manually adjust image

via “FOCUS+, FOCUS-”buttons. (Default of camera module is automatic adjustment)

Zoom:

adjusting the lens distance. It realizes zoom in and out.

Iris:

Iris function means change the value of F to make image realize

bright or dim by manually adjust . (Default of camera module is automatic cursor, it is not

DS1093-529

available.)

4.5 PRESET OPERATION INSTRUCTION

Preset instruction

Preset function means that store camera state (horizontal angle, tilt angle and lens

spec) .It

can realize recover the setting state in advance and call it.

4.5.1 SET PRESET

Rotating PTZ into the target monitored position. Press setting button “ ” and choice

preset

point, for example: “ ” and press “ ”button to finish preset setting.

Remark: 1. Preset point will replace the previous recording if you save the same preset

number

as the previous saved point.

2. It’s no relate to save the quantities of presets , it is based on the front device

specification .

4.5.2 CALL PRESET

Please check if the preset point is successfully saved before you call preset. Otherwise,

the

operation is vain. Operation way as below:

Press “ ” button ;

Input the preset number ;

3. Press“ ” button. PTZ will automatically return to the preset point in advance.

4.5.3 DELETE PRESET

Press “ ” button;

Input the preset point which one do you want to delete;

Press “ ” to delete preset point.

DS1093-529

4.6 SPECIAL FUNCTION

PRESET

FUNCTION

PRESET

FUNCTION

1080P N

vettorscan 2

1080P P

Patteners1

720P N

A-B Scan

720P P

XXXX

Vectorscan 1

XXX

Remark: Please be noted that the special functions only for our controller. Since different

control equipment have different protocol, if use some other controller, some special

functions

probablycan’t be effective.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere urmet domus Tastatur Handbücher

urmet domus

urmet domus 1092 Bedienungsanleitung

Beliebte Tastatur Handbücher anderer Marken

Vortexgear

Vortexgear POK3R Bedienungsanleitung

Razer

Razer RZ03-0188 Bedienungsanleitung

Logitech

Logitech RUGGED LITE Bedienungsanleitung

Honeywell

Honeywell ADEMCO 5839 Montageanleitung

Hama

Hama AK-120 Bedienungsanleitung

Rodgers

Rodgers RK-76 Bedienungsanleitung

Logic Controls

Logic Controls KB5000 Series Bedienungsanleitung

Rapoo

Rapoo E9270P Bedienungsanleitung

iKey

iKey DP-88 Bedienungsanleitung

Logitech

Logitech G413 TKL SE Montageanleitung

Keychron

Keychron C1 Bedienungsanleitung

Dahua

Dahua NKB Bedienungsanleitung

Ultimate Technology

Ultimate Technology 500 POS Bedienungsanleitung

Ducky

Ducky Shine 5 Bedienungsanleitung

Mace

Mace MACALLY MERGOKEY Bedienungsanleitung

iKey

iKey KYB-42-KIOSK Bedienungsanleitung

Akko

Akko MX108 Bedienungsanleitung

Viper

Viper V770 Bedienungsanleitung

urmet domus 1093/701 Bedienungsanleitung

Beliebte Tastatur Handbücher anderer Marken