Ursalink UR35 Bedienungsanleitung

UR35

Industrial Cellular Router

Quick Start Guide

Ursalink Technology Co., Ltd.

www.ursalink.com

Welcome

Thank you for choosing Ursalink UR35 industrial cellular router.

This guide describes how to install the UR35 and how to log in the Web GUI to configure the device. Once

you complete the installation, refer to the Ursalink UR35 User Guide for instructions on how to perform

configurations on the device.

Related Documents

This Start Guide only explains the installation of Ursalink UR35 router. For more functionality and advanced

settings, please refer to the relevant documents as below.

Document

Description

Ursalink UR35 Datasheet

Datasheet for the Ursalink UR35 industrial cellular router.

Ursalink UR32&UR35 User Guide

Users could refer to the guide for instruction on how to log in the

web GUI, and how to configure all the settings.

The related documents are available on Ursalink website: http://www.ursalink.com.

Declaration of Conformity

UR35 are in conformity with the essential requirements and other relevant provisions of the CE, FCC, and

RoHS.

For assistance, please contact

Ursalink technical support:

Email: support@ursalink.com

Tel: 86-592-5023060

Fax: 86-592-5023065

Ursalink UR35 Quick Start Guide

www.ursalink.com

Before you begin to install the UR35 router, please check the package contents to verify that you have

received the items below.

1.1 Package Contents

1 × UR35 or

1 × Ethernet Cable

1 × Power Adapter

2 × Magnetic Mount

Cellular Antennas

1 × Stubby Wi-Fi

Antenna (Optional)

1 × GPS Antenna

(Optional)

1 × Wall Mounting

Bracket (Optional)

If any of the above items is missing or damaged, please contact your Ursalink sales

representative.

1 × 8-Pin Pluggable

Terminal

1 × DIN Rail Kit

1 × Warranty Card

2 × Stubby Cellular

Antennas (Optional)

1. Packing List

Ursalink UR35 Quick Start Guide

www.ursalink.com

2.1 Overview

A. Front Panel

B. Left Side Panel

7Grounding Stud

8SIM and Reset Button Holder

9Power Connector

10 Serial Port & I/O

2.2 Dimensions (mm)

2. Hardware Introduction

1Wi-Fi Antenna Connector

2AUX Antenna Cellular Connector

3GPS Antenna Connector

4MAIN Cellular Antenna Connector

5LED Indicator Area

POWER: Power Indicator

SYSTEM: Status Indicator

Wi-Fi: Wi-Fi Indicator

VPN: VPN Indicator

SIM : SIM Status Indicator

: Signal Strength Indicator

6Ethernet Port & Indicator

Ursalink UR35 Quick Start Guide

www.ursalink.com

2.3 Pinouts

2.4 LED Indicators

LED

Indication

Status

Description

POWER

Power Status

Off

The power is switched off

The power is switched on

SYSTEM

System Status

Green Light

Static: Start-up

Blinking slowly: the system is running properly

Red Light

The system goes wrong

VPN

VPN Status

Off

VPN is disconnected

Green Light

VPN is connected

Wi-Fi

Wi-Fi Status

Off

Wi-Fi is disabled

Green Light

Static: Wi-Fi is enabled

Blinking slowly: sending or receiving data via Wi-Fi

SIM

SIM Card Status

Off

SIM1 or SIM2 is registering or fails to register (or there are

no SIM cards inserted)

Green Light

Blinking slowly: SIM1 (as primary SIM) has been registered

and is ready for dial-up

Blinking rapidly: SIM1(as primary SIM) has been registered

and is dialing up now

Static: SIM1 (as primary SIM) has been registered and

dialed up successfully

Orange

Light

Blinking slowly: SIM2 (as primary SIM) has been registered

and is ready for dial-up

Blinking rapidly: SIM2 (as primary SIM) 9has been

registered and is dialing up now

RS232

RS485

Description

---

Digital Input

GND

---

GND

---

Ground

---

Data -

TXD

---

Transmit Data

---

COM

Common

Ground

---

OUT

Digital Output

---

Data +

RXD

---

Receive Data

Description

Positive

Negative

Ursalink UR35 Quick Start Guide

www.ursalink.com

Static: SIM2 (as primary SIM) has been registered and

dialed up successfully

Signal

Strength

Signal 1/2/3

Off

No signal

Green Light

Static/Off/Off: weak signals with 1-10 ASU (please check if

the antenna is installed correctly, or move the antenna to

a suitable location to get better signal)

Static/Static/Off: normal signals with 11-20 ASU (average

signal strength)

Static/Static/Static: strong signals with 21-31 ASU (signal is

good)

2.5 Reset Button

Function

Description

SYSTEM LED

Action

Reboot

Blinking

Press and hold the reset button for about 5-15 seconds.

Static Green

Release the button and wait for system to reboot.

Reset

Blinking

Press and hold the reset button for more than 15 seconds.

Static Green →

Rapidly Blinking

Release the button and wait.

Off → Blinking

The router is now reset to factory defaults.

2.6 Ethernet Port Indicator

Indicator

Status

Description

Link Indicator (Orange)

Connected

Blinking

Transmitting data

Off

Disconnected

Ursalink UR35 Quick Start Guide

www.ursalink.com

Environmental Requirements

- Power Input: 9-48 VDC

- Power Consumption: Typical 3.9 W, Max 4.6 W

- Operating Temperature: -40°C to 70°C (-40°F -158°F)

- Relative Humidity: 0% to 95% (non-condensing) at 25°C/77°F

3.1 SIM Card/Micro SD Card Installation

UR35 do not support hot-plug. Please cut off the power before insert or take off cards.

A. Unscrew the cover of the SIM card/Micro SD B. Put SIM card/Micro SD card into the slot

then insert the card then take it off. and screw it up.

3.2 Antenna Installation

Rotate the antenna into the antenna connector accordingly.

The external antenna should be installed vertically always on a site with a good signal.

3. Hardware Installation

Ursalink UR35 Quick Start Guide

www.ursalink.com

3.3 Connect the Router to a Computer

Please connect PC to any port among LAN1-LAN4 of UR35 router directly.

3.4 Mount the Router

The router can be placed on a desktop or mounted to a wall or a DIN rail.

3.4.1 Wall Mounting (Measured in mm)

Use 2 pcs of M3 × 6 flat head Phillips screws to fix the wall mounting kit to the router, and then use 2 pcs of

M3 drywall screws to mount the router associated with the wall mounting kit on the wall.

Recommended torque for mounting is 1.0 N·m, and the maximum allowed is 1.2 N·m.

3.4.2 DIN Rail Mounting (Measured in mm)

Use 2 pcs of M3 × 6 flat head Phillips screws to fix the DIN rail to the router, and then hang the DIN rail on

the mounting bracket. It is necessary to choose a standard bracket.

Recommended torque for mounting is 1.0 N·m, and the maximum allowed is 1.2 N·m.

Ursalink UR35 Quick Start Guide

www.ursalink.com

3.5 Power Supply Installation

A. Take out the terminal from the router and unscrew the bolt on terminal.

B. Screw down the bolt after inserting power cable into the terminal.

Connecting the Power Cable

If you insert wires into the reverse holes, the router will not start and you must switch the wires

into the correct holes.

3.6 Protective Grounding Installation

A. Remove the grounding nut.

B. Connect the grounding ring of the cabinet’s grounding wire onto the grounding stud and screw up the

grounding nut.

The router must be grounded when deployed. According to operating environment, the ground wire

should be connected with grounding stud of router.

Color

Polarity

Red

Yellow

Ursalink UR35 Quick Start Guide

www.ursalink.com

Getting Started

Please connect PC to any port among LAN1-LAN4 of UR35 router directly. PC can obtain an IP address, or

you can configure a static IP address manually. The following steps are based on Windows 10 operating

system for your reference.

(Note: As remote access is disabled by default, you can't access to the router's Web GUI if you connect PC to

WAN port of the router. But it will function properly if you enable it on the Web GUI.)

③Click “Ethernet” (May have different names). ④Click “Properties”.

4. PC Configuration for Web GUI Accessing to Router

①Click “Search Box” to search “Control Panel” on the

Windows 10 taskbar.

②Click “Control Panel” to open it, and then click

“View network status and tasks”.

Inhaltsverzeichnis

Andere Ursalink Netzwerk-Router Handbücher

Ursalink

Ursalink UR75 Edge Bedienungsanleitung

Ursalink

Ursalink UR32 Bedienungsanleitung

Ursalink

Ursalink UR55 Bedienungsanleitung

Ursalink

Ursalink UR 51 Bedienungsanleitung

Ursalink

Ursalink UR52 Bedienungsanleitung

Ursalink

Ursalink UR75 Edge Bedienungsanleitung

Ursalink

Ursalink UR32 Bedienungsanleitung

Ursalink

Ursalink UR75 Edge Bedienungsanleitung

Ursalink

Ursalink UR 51 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise