USA SSC KS series Bedienungsanleitung
IP HIGH SPEED DOME
CAMERA
USER
MANUAL
www.USA‐SSC.com
V
1.0
Catalogue
1 Precautions 1
2 Product Overview 2
3 Web Browse Operation Guide 6
4 OSD Menu Operation Guide 35
5 Appendixes 55
1
1 Precaution
● please read this manual carefully before the installations and operations.
● Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage. The
unit should be transported in separated packing. In shipments of distributor and delivery of
maintenance, any damages caused by integral packing are not covered by warranty.
● Installation
Avoid heavy stress and violent vibration during installation. Don’t touch the camera cover directly
by hand. When connecting the power source, please follow all electric safety standards and only
use the power supply designated for this device. Keep the video and control signal in a decent
distance from high voltage devices and cable. Don’t apply power to camera before finishing the
installation.
● Internal Environment
Keep metal and inflammable material away from camera body to avoid fire short circuit and
damage. Please prevent all liquids material from entering the camera. If this occurs, please shut
down the power and pull out the plug-in. Then please inform the technical personnel immediately.
● Electrical Safety
The video image would be interfered when the camera is installed near Television, radio
transmitter, voltage changer and audio amplifier.
● Camera Protection
Avoid shooting very bright objects directly into the camera’s CCD (such as the sun or light fittings)
and avoid fixating the camera lens on bright static object for long time, as it will cause Irreparable
damage to the camera’s CCD.
● Cleaning Method
Please don’t use abrasive and violent detergent to clean the camera. Please choose dry fabric and
neutral detergent. And please use lens paper to clean the lens.
● please use our production under the following environmental standards:
2 Product Overview
2.1 Features
2.1.1 Special Features
●High Definition
H.264 compression algorithm, save the network bandwidth and hard disk storage space, aspect
2
ratio of 16:9 and 4:3 adjust at will; h. 264 main profile levels and M - JPEG video streaming can
be output at full frame speed. Support for dynamic coding parameters adjustment
●Fix/Veri-focus/Automatic focusing
With 20 x optical zoom, more than 20 times digital zoom and autofocus function, not only can
provide an ideal field of vision, but also can realize perfect automatic focus
●Double stream free switch
Support the double stream, choose the main stream or sub stream according to different
application.
●Supported protocols
Support TCP/IP、PPPoE、DDNS、FTP、UPNP 、Onvif,etc
●Voice intercom function
Support Voice intercom
●Alarm function
Support the local and network linkage signal; Provide area, mobile sensitivity detection alarm,
regional block alarm
●ROI function
Stream concentration makes the drawing region clearer, suitable for condition of the lack of
stream.
●OSD function
Support camera picture character superposition
●Power-down memory storage function
Camera stays on some location meeting for time limit before power-down, when camera is
power-on, it will back to the former location before power -down
2.1.2 Function Introduction
• Stepless speed changes, auto zoom/speed matching
• Pan 0.01~360o/S, Tilt 0.01o~120o/S, Preset: 360o/S (high speed IR speed dome)
• Pan 0.5o~35o, Tilt 0.5o~35o, Preset: 35o/s (for Vari-speed IR dome)
• Auto object track with zoom in/out and motion detection (Auto Track Model)
• Timing actions for 7 days of programmable schedule
• Built-in Semi-conductor heater & digital temperature sensor
• PWM cooling fan vari-speed temperature control
• Reserved network interface and space for network module
• Pan Tilt accuracy +/- 0.1o, 256preset positions
• 8 cruising tracks, each cruising track has 32 presets
• 4 pattern tours, 10 Mins memory, 500 programmable instructions
3
• Multi-Protocol through RS485 or coaxial cable.
• 8 auto scan with use-defined left and right boundaries and settable scan speed
• 8 Privacy Zones with defined English camera title
•Auto Compatible PELCO_P, PELCO_D compatible
• Guard Location: the dome will rotate back to preset position after a period of vacant time
• Alarm triggering: the alarm can trigger preset, auto scan, cruising and pattern tours functions
• Soft Address Function: the use can set up the dome address without uninstall the dome
2.1.3 Integrated Super Speed PTZ Rotator
• Delicate stepping motor, stable, sensitive and accurate
• 360°Pan and 90°Tilt range (auto-flip) without blind area
• Stepless speed change, auto zoom/speed matching
• Near / far IR Light auto matches camera zoom in/out
2.1.4 All-weather outdoor design
●IP66 Protection standard
●TVS 3000V Protection standard
In this section, the text describes the main functions of the infrared PTZ camera and its
implementation of general principles, not involving the specific operation method. Generally
manufacturer’s operation manual shall prevail, in some cases there will be some special
requirements and operation method, please contact the dealer to obtain the necessary
information.
● Preset Position Set up and Call Up
In the Preset function the camera stores the current pan/tilt angle, zoom and other position
parameters in its memory. When necessary the camera recalls these parameters and adjusts the
camera to a particular position. The user can store, recall and clear the presets easily and promptly
by using the keyboard controller. The camera can store up to 256 presets.
● Auto Scan
Users can set up the left and right boundaries by control keyboard. Then camera can scan
between these boundaries. It supports up to 8 groups of scanning paths.
● Cruising Track
The preset position can be programmed to be recalled in a set of sequences. This sequence
can be set to let the camera scan from one position to the next in a cycle at a set speed. This
feature is called the “auto cruise”. The cruise sequence and dwell time of each preset can be set. It
supports up to 8cruising tracks, each cruising track with 32 presets.
● Pattern Tour
Camera can memorize 600S running path or 500 programmable instructions. When start pattern
tour, camera will move automatically according recorded action path. It supports 4 groups of
pattern tours.
4
2.2 Technique Parameter
Technical Data
Power Supply:
DC12V+10% 50W
Decoder:
Built-in
Manual Speed:
Pan:0.01o～360o/S, Tilt: 0.01o～120o/S (high speed)
Pan:0.01o～100o/S, Tilt:0.01o～100o/S (Vair-speed)
Preset Speed:
360o/S (high speed) / 100o/S (Mid-speed)
Pan Angle:
360o continuous pan rotation
Tilt Angle:
90o(Auto Flip)
Number of Preset:
256
PresetAccuracy:
+0.1o
Alarm input/output:
4input,2 output
Auto Scan:
8 auto scan tracks, user-defined left and right boundaries and scan speed
Auto Cruising:
8 cruising tracks, each cruising tracks has 32 preset positions,
user-defined dwell time
Pattern Tour:
4 patterns, up to 500 instructions per pattern
Guard Location:
The dome will rotate back to preset position after a period of vacant time.
Operating Humidity:
0～90%
Operating Temp:
-35oC +60oC
2.3 OSD Menu operation
● Call up OSD menu
Call Preset 95 to enter the main OSD menu; call Preset 96 to close the OSD menu or
Select “Exit”
● Confirm
The “Left "and “Right "button is controlled by PTZ can change the required item, and the
changed item is the confirmed one without further confirmation. You can directly click “Up"
and “Down" button to go on your further operation. When setting the left and right boundary for
scan and pattern, you can click the “Focus Far" for confirmation.
● Cancel
The “up” and “down” button controlled by PTZ carry out the request for Further action;
meanwhile, it carries out the “Cancel” order for last operation.
5
3 Web Browse Operation Guide
3.1 Common Operations
Factory settings：
IP speed dome camera is a kind of network equipment, you need configure network IP
address, gateway and other information reasonably, and camera with default IP address in factory,
and user could change it according to their requirement.
Default IP address：192.168.0.99
Subnet mask：255.255.255.0
Gateway：192.168.0.1
WEB port：8000
Network parameters
Take the example of Windows XP operating system. Make sure the IP address in network
parameters of the user computer is in accordance with the one of the camera, they are in same
segment, the IP address in the same LAN cannot be the same, otherwise, it will interfere with
each other, causing the equipment couldn't operate normally.
After setting IP address, you could test whether it has been connected between the computer and
the camera by using the PING order from clicking the “start”-”run" button in the bottom left
corner. The format of the command: ping 192.168.0.99
If the screen shows like this:
6
As the picture shown above, it indicates that it has been successfully connected between the
computer and the camera. However, if the screen shows like this:
It indicates equipment is failure to install, you could check from the following aspects:
●If hardware connection is correct
●If computer TCP/IP is in the same segment as the camera
●If network forbid ping order, please connect network administrator
3.2 Web Login
3.2.1 Login
Enter IP address (default: 192.168.0.99) to open the interface, dialog box as follows comes out:
◆user name：admin
◆password：admin
Picture 2.2.1-1 login interface
7
◆Port：Default 8000
3.2.2 Download playing component
After you logged in, if the WEB browser indicates it is the first time of visiting or plug-in
reminds you of the update of the new version. （See 3.2.2-1). Double-click this plug-in and it
will remind you of the downloading process. Or you can double-click the icon at the top-right
corner of the login interface. Double-click the downloaded WebPluginInstaller.exe and start
install the playing plug-in for WEB browser, then confirm its installation as well as clicking the
“Next "button until finished. You need to return to the WEB browser screen and refresh the
display if you want to run this plug-in after installment, then you can watch the video.
The IP address again to the login screen after you have installed the plug-in and then input user
name, code, and then click the “login "button to enter the “preview "screen. See picture 3.2.3-1
Picture 3.2.3-1 Preview screen
Picture 3.2.2-1 Plug-in installation
8
Sheet 3.2.3-2 Preview screen information
Inhaltsverzeichnis
