USP Duramax Handbuch

OWNER’S MANUAL /

Instructions for Assembly

• Tall Walk in Shed

• Quick & Easy Assembly

• Ridge Reinforced Walls

• Wide Double Doors

• Available in Various Sizes

Call us for any missing or damaged parts.

Do not return to the store.

Metal Garden Display Shed

Size 10 Ft x 2 Ft

Customer

Service Hotline

(800) 483-4674

www.uspolymersinc.com

Requires two people and takes 2-3 hours for Installation.

ALL PURPOSE METAL STORAGE SHEDS

Duramax Storage Shed

Limited Fifteen Year Warranty

U.S. Polymer Inc. will send a replacement part free of charge, in the event of material defects and or

workmanship for a period of fifteen years from the date of purchase.

This warranty is extended only to the original purchaser. A purchase receipt or other proof of date of original

purchase will be required before warranty service is rendered. In no event shall we pay the cost of flooring,

labor, installation or any other costs related thereto.

This warranty only covers failures due to defects in material or workmanship which occurs during normal

use and does not extend to color change arising due to normal weathering or to damage resulting from

misuse or neglect, commercial use, failure to follow assembly instructions and the owner’s manual (including

proper anchoring of the shed), painting, forces of nature and other causes which is beyond our control.

Claims under this warranty must be made within the warranty period by calling 1-800-483-4674 or mail in

a dated sales slip and clear photograph of the part to:

U.S. Polymers, Inc.

6915 Slauson Avenue

Commerce, CA 90040

We reserve the right to discontinue or change components. If a component has been discontinued or is

not available,

U.S. Polymers, Inc. reserves the right to substitute a component of equal quality as may be compatible.

Limits and Exclusions

There are no express warranties except as listed above. The warrantor shall not be liable for incidental or

consequential damages resulting from the use of this product, or arising out of any breach of this warranty.

All express warranties are limited to the warranty period set forth above . Some states do not allow the

exclusion or limitation on how long an implied warranty lasts, so the above limitations may not apply to

you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to

state or country to country.

Parts List

Hand Gloves

Cordless Drill - Philips Head

Screw driver - Philips Head

Carpenter’s Square

Eye Protector

ACCESSORIES

CODE DESCRIPTION QTY

BS BOTTOM SLIDER 4

DH DOOR HANDLE 2

FC FLASHING END CAP 2

TC TOP CORNER 4

TS TOP SLIDER 4

VC VENTILATION COVER 4

PW PLASTIC WASHER 146

PC PLASTIC SCREW COVER 104

WST WEATHER STRIPPING TAPE 0.75MTR

S1 DIA. 4.2 x 10mm. (5/32” x 3/8”)

SHEET METAL SCREW 174

S2 DIA. 4.2 x 16mm. (5/32” x 5/8”)

SHEET METAL SCREW 24

S3 M4 x 10mm. (5/32” x 3/8”)

MACHINE SCREW WITH NUT 98

8’ Step Ladder

Adjustable pliers

Level - 3ft.

Tape Measure

BOTTOM SLIDER

(BS)

VENTILATION COVER

(VC)

TOP CORNERS

(TC) TOP SLIDER

(TS)

PLASTIC WASHER

(PW) PLASTIC SCREW COVER

(PC)

SHEET METAL SCREW

(S1, S2) MACHINE SCREW WITH

NUT (S3)

FLASHING END CAP

(FC)

DOOR HANDLE

(DH)

ACCESSORIES

WEATHER STRIPPING

TAPE (WST)

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

Tools You Will Need

ENTRANCE TAPER

CHANNEL (ECA)

SLIDING CHANNEL COVER

(SCA)

DOOR COLUMN PROFILE

LEFT (DCL)

DOOR PANEL STRIP SIDE

AND CROSS

(DSS, DSCLA,DSCRA)

SLIDING CHANNEL

(SLA, SRA) SLIDING CHANNEL

SUPPORT (SSA)

ROOF SUPPORT

(RSS)

ROOF FLASHING

(RF1A, RF2A, RFSS)

ROOF SUPPORT BRACKET

(SB1A, SB2A)

ROOF FLASHING CENTER

(RFTS)

DOOR PANEL STRIP

TOP AND BOTTOM

(TSLA, TSRA, BSLA, BSRA)

TOP ANGLE BACK

(ABLA, ABRA)

BASE BAR

(BBF)

BASE BAR

(BLA, BRA, BS2S)

TOP ANGLE SIDE

(AS1S)

DOOR COLUMN PROFILE

RIGHT (DCR)

PROFILES

GABLE PANEL SUPPORT

(GPS)

Note - Use screws with plastic washers

on top of prepainted surface only.

Note: Check all parts prior to installation.

CODE DESCRIPTION QTY

BLA BASE BAR BACK LEFT 1

BRA BASE BAR BACK RIGHT 1

BS2S BASE BAR SIDE LEFT / RIGHT 2

BBF BASE BAR FRONT 2

ECA ENTRANCE TAPER CHANNEL 1

DCL DOOR COLUMN PROFILE LEFT 1

DCR DOOR COLUMN PROFILE RIGHT 1

ABLA TOP ANGLE BACK LEFT 1

ABRA TOP ANGLE BACK RIGHT 1

AS1S TOP ANGLE SIDELEFT / RIGHT 2

SCA SLIDING CHANNEL COVER LEFT / RIGHT 2

SSA SLIDING CHANNEL SUPPORT 1

SLA SLIDING CHANNEL LEFT 1

SRA SLIDING CHANNEL RIGHT 1

RSS ROOF SUPPORT LEFT / RIGHT 4

SB1A ROOF SUPPORT BRACKET FRONT RIGHT / BACK LEFT 2

SB2A ROOF SUPPORT BRACKET FRONT LEFT / BACK RIGHT 2

RF1A ROOF FLASHING FRONT RIGHT / BACK LEFT 2

RF2A ROOF FLASHING FRONT LEFT / BACK RIGHT 2

RFSS ROOF FLASHING SIDE 2

RFTS ROOF FLASHING TOP 1

TSLA DOOR PANEL STRIP TOP LEFT 1

TSRA DOOR PANEL STRIP TOP RIGHT 1

BSLA DOOR PANEL STRIP BOTTOM LEFT 1

BSRA DOOR PANEL STRIP BOTTOM RIGHT 1

DSS DOOR PANEL STRIP SIDE LEFT / RIGHT 2

DSCLA DOOR PANEL STRIP CENTER LEFT 1

DSCRA DOOR PANEL STRIP CENTER RIGHT 1

WCFS WALL PANEL CORNER LEFT / RIGHT 2

WS WALL PANEL SIDE 5

WFL WALL PANEL FRONT LEFT 1

WFR WALL PANEL FRONT RIGHT 1

GPLA GABLE PANEL LEFT 2

GPRA GABLE PANEL RIGHT 2

GPS GABLE PANEL SUPPORT 2

RPS ROOF PANEL LEFT / RIGHT 2

DPL1A DOOR PANEL LEFT 1

DPL2A DOOR PANEL LEFT 1

DPR1A DOOR PANEL RIGHT 1

DPR2A DOOR PANEL RIGHT 1

Exploded View

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

Left Door

Right Door

SCA

DCL

SB2A

BS2S

BBF

BBF ECA

AS1S

SRA

ABRA

SB1A

SB2A

SB1A

RF1A

RF2A

RFTS

BLA

ABLA

BRA

SSA

DCR

WFL

WFR

WS WS WS WS

WCFS

GPLA

GPRA

RPS

RF1A

RF2A

RPS

SLA

BS2S

AS1S

RSS

A. Foundation & Base Frame

1. Use pressure treated wood studs 2”x 4”

(50mm x 88.9mm) to create a platform frame that

has an outside dimension of 23”x 125”

(584.2mm x 3175mm).

DuraMax must be installed on a level wooden platform

or a level concrete foundation.

2. Using exterior grade CDX 3/4” (19mm) plywood,

cut and fit together the sheets to form solid foundation

as shown. Foundation must be square and level.

Note: It is important that these instructions

are followed step by step.

Wooden platform is extra and

is not included. Don’t install

under windy conditions.

Note

Lay 50 x 88.9mm Flat

Note

(1) Base bar back left (BLA)

(1) Base bar back right (BRA)

(2) Base bar side (BS1A)

(2) Base bar side (BS2A)

(2) Base bar front (BBF)

(1) Entrance taper channel (ECA)

(12) Sheet metal screw (S1)

(20) Sheet metal screw (S2)

Parts needed:

The following are the list of lumber and sizes

you will need.

Wooden Platform (Not Included)

Pressure Treated - Wood Studs:

2ea 2” x 4” x 125” (50mm x 88.9mm x 3175 mm)

5ea 2” x 4” x 16” (50mm x 88.9mm x 406.4 mm)

Exterior Grade (CDX) - 3/4” (19mm) plywood

1ea 3/4” x 23” x 96” (19mm x 584.2mm x 2438.4mm)

1ea 3/4” x 23” x 29” (19mm x 584.2mm x 736.6mm)

L-Brackets: 4ea

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

Note - Use screws with plastic washers

on top of prepainted surface only.

125 ” (3175mm)

23” 584.2mm)

L- BRACKET L- BRACKET

16” (406.4mm)

28”

(711.2mm) 28”

(711.2mm) 23 1/2”

(596.9mm)

L- BRACKET L- BRACKET

29”

96” (2438.4mm) (736.6mm)

23” 584.2mm)

3. Assemble base bar back left (BLA) and base

bar back right (BRA) with four (S1) screws.

See fig. 1 & 2.

4. Place the base bar assembly on top of the

foundation. Use (S2) screws to fix the assembly

to foundation.

Fig.1 Fig.2

BLA

BRA

Take care of sharp edges.

Note

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

BLA

BRA

5. Place the base bar side(BS2S) on left side.

Insert the edge of (BS2S) into the back base bar

(BLA) and secure with (S1) screws. See fig. 1

Place the base bar side (BS2S) on right side. Insert

the edge of (BS2S) into the back base bar (BRA)

and secure with (S1) screws. See fig. 2 BS2S

BS2S

BLA

BS2S

BRA

BS2S

Fig.1

Fig.2

1&2

Back

Left

Front

Right

BLA

BRA

BLA

BRA

BS2S

BS2S BLA

BRA

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

8. Using the carpenter square, line up the corners.

Secure the base (BBF) to the foundation with (S2)

screws.

Fig.1

6. Using a carpenter square, line up the corners.

Secure base bar side assembly to the foundation

with (S2) screws.

Fig.1 Fig.2

S2 S2

BS2S

BLA

BRA

7. Place the base bar (BBF) on top of the base

bar side on both side. Secure with (S1) screws on

both corners. See fig. 1 & 2.

Fig.1 Fig.2

BBF

BS2S

1&2

BBF

BS2S

BRA

BLA

BS2S

BBF

10. Measure in all direction as shown in figure.

Make the base bar assembly in a perfect square.

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

10a. (Concrete foundation) Using a carpenter

square, line up corners. Align Base bars, mark the

concrete at the holes in the base and drill concrete

with 1/4” (dia. 6mm) concrete bit to accept anchor

bolts to a 1 3/4” (44mm) depth. Replace base and

secure with 1/4” x 1 3/8” (M6 x 35mm) anchor bolts

(not provided).

Concrete foundation

(367mm)

9. Place the entrance taper channel (ECA) on top

of the (BBF). Secure with (S2) screws to the

foundation. See fig. 1 & 2.

Fig.1 Fig.2

ECA

BBF

1 & 2

(

3037mm

)

(1) Sliding channel support left (SSA)

(2) Sliding channel cover left/right (SCA)

(4) Top slider (TS)

(1) Door column profile left (DCL)

(1) Door column profile right (DCR)

(76) Sheet metal screw (S1)

(8) Machine screw (S3)

(64) Plastic washer (PW)

Parts Needed:

(1) Wall panel front right (WFR)

(1) Wall panel front left (WFL)

(2) Wall panel corners left&right (WCFS)

(5) Wall panel side (WS)

(1) Sliding channel right (SRA)

(1) Sliding channel left (SLA)

(1) Top angle back left (ABLA)

(1) Top angle back right (ABRA)

(2) Top angle side left & right (AS1S)

B. Walls & Columns

All panels are clearly

marked and care should

be taken to use

the correct one.

Note

Note - Use screws with plastic washers

on top of prepainted surface only.

ECA BBF

ECA

(367mm)

Fig.1 Fig.2

BBF BS2A

2. Place the wall panel corner left &right (WCFS)

on the base bar (BS2S). Line up the holes with base

bar and use (S1) screws with washers to Secure.

Make sure the overlapping

position is as shown in fig.1.

Note

WFR

ECA

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

1. Place the wall panel (WFR) on the base bar

(BBF) front right side of the shed. Line up the holes

with base bar. Secure with (S1) screws with washers

from outside.

WFR

BBF

Fig.1

WFR

3. Use (S3) bolt and nut with washers to join together

the wall panels.

Fig.1

WCFS

WFR

SRA

IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.

5. Insert two pieces of (TS) Top slider into the sliding

channel. See blowup.

Make sure the position of the

projection on (TS) towards

inside.

Note

TS SRA

Front

Fig.1

6. Place the wall panel (WFL) on the base bar (BBF)

front left side of the shed. Line up the holes with

base bar. Secure with (S1) screws with washers

from outside.

WFL

BBF Front

Fig.1

4. Place the sliding channel right (SRA) on top of

the wall panel (WFR) from inside. See the position

in fig.1. Line up the holes with wall panel. Use (S1)

screws with washers to fix. See fig. 2 .

Fig.1 Fig.2

SRA

WCF

1&2

WFR

SRA

WCFS

WFL

Andere Handbücher für Duramax

Inhaltsverzeichnis

Andere USP Gartenhaus Handbücher

USP

USP DURAMAX 30325 Bedienungsanleitung

USP

USP Duramax 8 Ft x 8 Ft DuraMate V2 Bedienungsanleitung

USP

USP DuraMax WoodBridge 20225 Bedienungsanleitung

USP

USP DuraMax 30115-1 Bedienungsanleitung

USP

USP DURAMAX 6 Ft StoreMate Plus Bedienungsanleitung

USP

USP DURAMAX Apex 10.5 x 8 Handbuch

USP

USP DURAMAX Apex Pro 10.5 x 8 Handbuch

USP

USP Duramax Bedienungsanleitung

USP

USP DURAMAX '6 Ft StoreMate-V2 Bedienungsanleitung

USP

USP DURAMAX 10.5 Ft WoodBridge Plus Bedienungsanleitung

USP

USP DURAMAX 10 Ft WoodSide Handbuch

USP

USP DURAMAX WoodSide-V2 Bedienungsanleitung

USP

USP DuraMax '7 Ft StoreMax Plus Montageanleitung

USP

USP DuraMax Eco Bedienungsanleitung

USP

USP DURAMAX WoodBridge Plus 40224 Gebrauchs- und Pflegehandbuch

USP

USP DURAMAX 10Ft x 12Ft Eco Bedienungsanleitung

USP

USP DuraMax WoodBridge 5 Bedienungsanleitung

USP

USP DURAMAX SidePro 10.5 Ft x 3 Ft 98001-2 Bedienungsanleitung

USP

USP DURAMAX 20255 Bedienungsanleitung

USP

USP DURAMAX 10Ft Eco Bedienungsanleitung

USP

USP DURAMAX 15.5 Ft x 8 Ft Apex Pro Bedienungsanleitung

USP

USP DURAMAX 10.5 Ft x 13 Ft WoodBridge Plus Handbuch

USP

USP DuraMax 20224 Bedienungsanleitung

USP

USP Duramax Apex Bedienungsanleitung

Beliebte Gartenhaus Handbücher anderer Marken

Mercia Garden Products

Mercia Garden Products 0628LOG181-V4 Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5930-6 Installationshandbuch

Gartenhaus-King

Gartenhaus-King Valery Bedienungsanleitung

Rion

Rion Hobby Gardener Bedienungsanleitung

POD

POD Camping 480 Bedienungsanleitung

Select

Select ISAAC E9682 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01DTSHPWOR1010DDOW-V4 Gebrauchsanweisung

Palmako

Palmako Saale Bedienungsanleitung

Lemeks

Lemeks Palmako Kira EL16-3623 Installationshandbuch

Mercia Garden Products

Mercia Garden Products 0644LOG186-V4 Gebrauchsanweisung

Palmako

Palmako Roger FR44-5953-2 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03DTSHHP1206HGD4MW-V1 Gebrauchsanweisung

WAR-LOCK

WAR-LOCK GARDENSHED Skillion Series Bedienungsanleitung

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Bedienungsanleitung

G21

G21 Boston 882 Bedienungsanleitung

Lemeks

Lemeks Palmako Grace PM56-4529 Installationshandbuch

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 Gebrauchsanweisung

Shire

Shire Salcey Bedienungsanleitung