UTILITY ROCKET V1.0 Bedienungsanleitung

Rocket Access Point V1.0

User Guide

June 2011

Rocket Access Point

Notices

The contents of this document and the associated software are the property of Utility Associates, Inc.

Any reproduction in whole or in part is strictly prohibited. For additional copies of this document or

software, please contact Utility Associates.

Information in this document is subject to change without notice and does not represent a

commitment on the part of Utility Associates. The software as described in this document is furnished

under a license agreement or non-disclosure agreement. The software may be used or copied only in

accordance with the terms of the agreement. It is against the law to copy said software on any medium

except as specifically allowed in the license or non-disclosure agreement. No part of this manual may

be reproduced or transmitted in any form or by any means, for any purpose, without the express

written permission of Utility Associates. Companies, names, and data used in examples herein are

fictitious unless otherwise noted.

Rocket Access Point

iii

Table of Contents

Hardware Setup Overview..............................................................................................................................................1

Connecting cables within the RAP’s Enclosure ..................................................................................................2

Connecting cables outside the RAP’s Enclosure................................................................................................7

Configuring your RAP Overview ...................................................................................................................................9

Basic Setup.......................................................................................................................................................................9

Main Page...................................................................................................................................................................... 10

Wireless Page ............................................................................................................................................................... 11

Setting up your wireless configuration .............................................................................................................. 12

Network Mode............................................................................................................................................................. 13

Services Page ............................................................................................................................................................... 14

Setting RAP Services.................................................................................................................................................. 15

System Page ................................................................................................................................................................. 16

System Administration............................................................................................................................................. 17

FAQ .................................................................................................................................................................................. 18

Rocket Access Point

Hardware Setup Overview

Your RAP is a self-contained unit within its own housing. The unit has been factory setup with its default configuration

however, you should familiarize yourself with each connection as a reference for any possible maintenance and or

trouble shooting in the unlikely event that your RAP does not function as designed.

Rocket Access Point

Connecting cables within the RAP’s Enclosure

1. Ensure that the unit is powered off.

a. This is accomplished by removing the barrel connector on the cable with the RED tag on it; please insure

this connector does not come in connect with any metallic objects.

i. Additionally ensure that NO RJ45 external cables are attached to the POE switch port located on

the front of the internal mount that secures the RAP unit in the enclosure.

Rocket Access Point

2. Connect the RAP’s internal antenna cables to each of the respective ports located on the inside front enclosures

housing.

a. Ensure that the long ‘rubber duck” barrel antenna is attached to the 2.4 GHz port located directly next to

the DB9 connection on the same side as the 5 GHz antenna connectors.

Inside front enclosure

Rubber duck

Rocket Access Point

3. Once all antenna connections have been attached correctly, attach the barrel connector to the RAP

power access port located directly above the console port.

Note: Please make sure that these connections are made properly and tightened accordingly.

4. Connect the power cable to POE adapter.

Rocket Access Point

Note: The following picture is the side view of the Rocket inside the RAP. The Ethernet, Console, and 802.11 5GHz

(A&B) ports are diificult to see while housed inside the RAP’s shell.

From top to bottom: Console port, RAP's Ethernet ports, top and bottoms WiFi ports on the inside of the RAP’s

enclosure.

802.11 5GHz-A

Console Port

Ethernet Ports

Rubber duck 2.4 GHz

802.11 5GHz-B

Rocket Access Point

5. Connect an Ethernet cable from one of the RAP's three (3) Ethernet LAN ports to the POE Switch port

located on the front of the internal mount that secures the RAP unit in the enclosure on the inside of

the RAP’s enclosure.

Note: Make sure that you do not connect the network cable into the console port located directly above the Ethernet

LAN ports.

6. Connect your POE network patch cable into the POE Switch port located on the front of the internal

mount that secures the RAP unit in the enclosure on the inside of the RAP’s enclosure.

7. Plug any additional Ethernet patch cables that lead to other access points or routers (Optional).

Rocket Access Point

Connecting cables outside the RAP’s Enclosure

1. Locate the cabling access port on the bottom side the enclosure.

a. This is where your internal network-POE CAT 5/6 patch cable will be inserted to complete the LAN

connections.

2. Connect the bottom Ethernet port to a POE adapter. This port is used to power on the RAP, as stated in the

previous section.

Inhaltsverzeichnis

Andere UTILITY Drahtloser Zugangspunkt Handbücher

UTILITY

UTILITY Rocket Handbuch

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung