V-tech BM5000 Bedienungsanleitung

Model:

BM5000

For product support

please call: 1 300 369 193

User’s manual

BM5000

Safe & Sound

Digital Audio Monitor

with Wire-Free

Home Monitoring

Congratulations

on purchasing your new VTech product. Before using this

product, please read Important safety instructions on

page iii of this manual.

This manual has all the feature operations and troubleshooting

necessary to install and operate your new VTech product.

Please review this manual thoroughly to ensure proper

installation and operation of this innovative and feature rich

VTech product.

Product introduction

BM5000 is a baby monitor which consists of one baby unit

(BM5000 BU), one parent unit (BM5000 PU).

The parent unit may be shipped with protective stickers

covering the displays. Remove the protective sticker before use.

iii

Important safety instructions

When using your equipment, basic safety precautions should always

be followed to reduce the risk of ﬁre, electric shock and injury,

including the following:

Follow all warnings and instructions marked on the product.

Adult setup is required.

This product is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be used

as such.

This product is not intended for use as a medical monitor.

Do not use this product near water. For example, do not use

it next to a bath tub, wash bowl, kitchen sink, laundry tub or

swimming pool, or in a wet basement or shower.

CAUTION: Use only the batteries indicated in this manual. There

may be a risk of explosion if a wrong type of battery is used for

the parent unit. Use only the supplied rechargeable battery or

replacement battery pack for the parent unit. Do not dispose of

batteries in a ﬁre. They may explode.

Use only the adapters included with this product. Incorrect adapter

polarity or voltage can seriously damage the product.

Baby unit power adapter: Input 100-240V AC 150mA 60Hz;

Output: 6V DC 600mA;

Parent unit power adapter: Input 100-240V AC 150mA 60Hz;

Output: 6V DC 400mA.

The power adapters are intended to be correctly oriented in a

vertical or ﬂoor mount position. The prongs are not designed to

hold the plug in place if it is plugged into a ceiling, under-the-table

or cabinet outlet.

For pluggable equipment, the socket-outlet shall be installed

near the equipment and shall be easily accessible.

Unplug this product from the wall outlet before cleaning. Do not

use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Unplug the power cords before replacing batteries.

Do not cut off the power adapters to replace them with other

plugs, as this causes a hazardous situation.

Do not allow anything to rest on the power cords. Do not install

this product where the cords may be walked on or crimped.

10.

11.

12.

13.

Important safety instructions (continued)

This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power supply in your home, consult your dealer or local

power company.

Do not overload wall outlets or use an extension cord.

Do not place this product on an unstable table, shelf, stand or

other unstable surfaces.

This product should not be placed in any area where proper

ventilation is not provided. Slots and openings in the back or

bottom of this product are provided for ventilation. To protect them

from overheating, these openings must not be blocked by placing

the product on a soft surface such as a bed, sofa or rug. This

product should never be placed near or over a radiator or heat

Never push objects of any kind into this product through the slots

because they may touch dangerous voltage points or create a

short circuit. Never spill liquid of any kind on the product.

To reduce the risk of electric shock, do not disassemble this

product, but take it to an authorized service facility. Opening or

removing parts of the product other than speciﬁed access doors

may expose you to dangerous voltages or other risks. Incorrect

reassembling can cause electric shock when the product is

subsequently used.

You should test the sound reception every time you turn on the

units or move one of the components.

Periodically examine all components for damage.

Be aware of possible loss of privacy while using public airwaves.

Conversations may be picked up by other nursery monitors,

cordless phones, scanners, etc.

Children should be supervised to ensure that they do not play with

the product.

The product is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

SAVE THESE INSTRUCTIONS

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

Cautions

Use and store the product at a temperature between 0oC and

40oC.

Do not expose the product to extreme cold, heat or direct sunlight.

Do not put the product close to a heating source.

Batteries should not be exposed to excessive heat such as bright

sunshine or ﬁre.

Make sure the baby unit(s) and the adapter cord(s) are always out

of reach of the baby, at least 1 metre away from the baby or crib, to

avoid a possible strangulation hazard.

Never place the baby unit(s) inside the baby’s crib or playpen.

Never cover the baby unit(s) or parent unit with anything such as a

towel or a blanket.

Other electronic products may cause interference with your baby

monitor. Try installing your baby monitor as far away from these

electronic devices as possible: wireless routers, radios, cellular

telephones, intercoms, room monitors, televisions, personal

computers, kitchen appliances and cordless telephones.

Do not attach the wire-free sensors to a baby’s cot or playpen.

Ensure the wire-free sensors are installed out of the reach of

children.

Table of contents

Getting started .................. 1

Parts checklist ........................... 1

Parent unit battery installation... 2

Baby unit and parent unit

installation.............................. 3

Parent unit battery charging ...... 5

Baby unit overview.................... 6

Parent unit overview ................. 8

Parent unit display icons ......... 11

Parent unit display messages...13

Positioning the baby monitor.... 14

Operating range ...................... 15

Test your baby monitor before

use....................................... 15

Using your baby monitor ...16

Power on or off the baby unit ... 16

Power on or off the parent unit...16

Adjust the speaker volume for

baby unit.............................. 16

Adjust the speaker volume for

parent unit ........................... 16

Adjust the sound sensitivity of

the baby unit........................ 17

Set date and time .................... 18

Sound alert.............................. 19

Vibration alert.......................... 19

Temperature............................ 20

Set the temperature range...... 20

Set the temperature format..... 21

Projector and lullaby .............. 22

Talk to the baby unit ................ 23

Find/page the parent unit........ 23

Adding sensors ...24

Sensor alerts........................... 25

Sensor status .......................... 25

Sensor log ............................... 26

Sensor settings ....................... 26

Sensor notiﬁcations ................ 27

Rename the sensor................. 28

Test the sensor signal

strength ............................... 28

Appendix .......................... 29

Troubleshooting ...................... 30

Operating range....................... 34

Maintenance ............................ 34

Customer service and product

warranty............................... 35

Technical speciﬁcations.......... 37

Parts checklist

Check to make sure the package contains the following items.

Save your sales receipt and original packaging in the event

warranty service is necessary.

Getting started

Parent unit

(BM5000 PU)

Baby unit

(BM5000 BU)

Battery compartment

cover

Baby unit adapter Battery Parent unit adapter

User’s manual

Getting started

Parent unit battery installation

You can power up the parent unit by connecting it to AC

power or to the rechargeable battery provided. Even if the

parent unit is connected to AC power, we recommend you

also install the battery. This guarantees continual operation in

case of a power outage.

Install the battery as shown below.

To replace the battery, unplug the battery connector from

the socket, and then pull the battery out of the battery

compartment. Follow the steps above to install the battery.

The operating time for using the rechargeable battery is

short. If you want to monitor your baby for a long time, we

recommend you connect the parent unit to AC power.

If the parent unit will not be used for a long time,

disconnect and remove the battery to prevent possible

leakage.

Use only the battery supplied with this product.

•

Getting started

Baby unit and parent unit installation

You can power up the baby unit by connecting it to AC power.

Install the baby unit as shown below.

Bundle the power adapter cord neatly with a twist tie. The

baby unit turns on when it is powered up.

Inhaltsverzeichnis

Andere V-tech Babyphone Handbücher

V-tech

V-tech VM5271-2 Bedienungsanleitung

V-tech

V-tech VM343-2 Bedienungsanleitung

V-tech

V-tech VM344-2 Bedienungsanleitung

V-tech

V-tech VM351 Bedienungsanleitung

V-tech

V-tech VM5261 Bedienungsanleitung

V-tech

V-tech BM5550AU Bedienungsanleitung

V-tech

V-tech BM4000-BEAR Bedienungsanleitung

V-tech

V-tech DM111 Bedienungsanleitung

V-tech

V-tech VM343 Bedienungsanleitung

V-tech

V-tech BM1100 Bedienungsanleitung

V-tech

V-tech DM221 Bedienungsanleitung

V-tech

V-tech SAFE&SOUND BM1000 Bedienungsanleitung

V-tech

V-tech VM311 Bedienungsanleitung

V-tech

V-tech BM4500-OWL Bedienungsanleitung

V-tech

V-tech VM343-2 Bedienungsanleitung

V-tech

V-tech RM5764HD Bedienungsanleitung

V-tech

V-tech VM342-2 Bedienungsanleitung

V-tech

V-tech VM3211 Bedienungsanleitung

V-tech

V-tech BM2500 Bedienungsanleitung

V-tech

V-tech VM341 Bedienungsanleitung

V-tech

V-tech BM2000 Bedienungsanleitung

V-tech

V-tech VM341-216 Bedienungsanleitung

V-tech

V-tech VM302 Bedienungsanleitung

V-tech

V-tech BM2050 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung