V-tech VM341 Bedienungsanleitung

Quick start guide

VM341

VM341-2

VM304

Go to www.vtechphones.com

to register your product for

enhanced warranty support

and latest VTech product news.

Specifications are subject to change without notice.

Document order number: 96-010233-010-100

Sound activation

When the infrared LEDs are on, the

image is in black and white.This is

normal due to external light sources.

Depending on the surroundings

and other interfering factors, like

lightings, objects, colors and

backgrounds, the display resolution

may vary. Adjust the baby unit’s

angle, or place the baby unit at a

higher level to prevent glare and

blurry display.

TIP

The baby unit has infrared LEDs that

allow you to see your baby at night or

in a dark room. When the baby unit

detects low light levels, the infrared

LEDs turn on automatically.

NOTE

Mount the baby monitor - Method 2

If you drill the holes into a stud, go to

step 3.

-OR-

If you drill the holes into an object other

than a stud, insert the wall anchors into

the holes. Tap gently on the ends with a

hammer until the wall anchors are flush

with the wall.

Insert the screws into the holes

and tighten the screws until

only 1/4 inch of the screws are

exposed.

Place the baby unit on the wall mount.

Tighten the screw into the threaded

socket at the bottom to secure the baby

unit. Align the holes on the wall mount

with the screws on the wall, and slide the

wall mount down until it locks into place.

Check for reception strength and

camera angle before drilling the

holes.

Place the wall mount on a wall and

then use a pencil to mark the top

and the bottom holes as shown.

Remove the wall mount and drill

two holes in the wall (7/32” drill bit).

NOTE

SOUND-ACTIVATED SCREEN

O

Night vision

Mount the baby monitor - Method 1

If you drill the holes into a stud, go to

step 3.

-OR-

If you drill the holes into an object other

than a stud, insert the wall anchors into

the holes. Tap gently on the ends with a

hammer until the wall anchors are flush

with the wall.

Align the wall mount and screws

with the holes in the wall as shown.

Tighten the screw in the middle

hole first, so that the wall mount

position is fixed.You can tighten

the other screw in the top hole.

Place the baby unit on the wall mount.

Tighten the screw into the threaded

socket at the bottom to secure the

baby unit.

Check for reception strength and

camera angle before drilling the

holes.

Place the wall mount on a wall and

then use a pencil to mark the top and

the bottom holes as shown.

Remove the wall mount and drill two

holes in the wall (7/32” drill bit).

NOTE

Connect and power on

Place the baby monitor

At least 1 meter

(3 feet)

At least 1 meter (3 feet)

What’s in the box

Install the battery

1 set for VM304/VM341

2 sets for VM341-2

1 set for VM341

Andere Handbücher für VM341

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere V-tech Babyphone Handbücher

V-tech

V-tech VM3252-2 Bedienungsanleitung

V-tech

V-tech BM3500 Bedienungsanleitung

V-tech

V-tech RM5722 Bedienungsanleitung

V-tech

V-tech VM321 Bedienungsanleitung

V-tech

V-tech DM111 Bedienungsanleitung

V-tech

V-tech BM3000 Bedienungsanleitung

V-tech

V-tech VM342-2 Bedienungsanleitung

V-tech

V-tech BM3450N Bedienungsanleitung

V-tech

V-tech VM991 Bedienungsanleitung

V-tech

V-tech BM2000 Bedienungsanleitung

V-tech

V-tech BM4700N Bedienungsanleitung

V-tech

V-tech BM5550AU Bedienungsanleitung

V-tech

V-tech DM1211 Bedienungsanleitung

V-tech

V-tech SAFE&SOUND BM1000 Bedienungsanleitung

V-tech

V-tech BM4010 Bedienungsanleitung

V-tech

V-tech VM5271-2 Bedienungsanleitung

V-tech

V-tech BM3100 Bedienungsanleitung

V-tech

V-tech VM346 Bedienungsanleitung

V-tech

V-tech BM3500 Bedienungsanleitung

V-tech

V-tech DM111 Bedienungsanleitung

V-tech

V-tech VM3211 Bedienungsanleitung

V-tech

V-tech VM305 Bedienungsanleitung

V-tech

V-tech VM981 Bedienungsanleitung

V-tech

V-tech VM302 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung