V-tech vt5831 Bedienungsanleitung
1
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen
sink, or swimming pool).
5. Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided
for ventilation. To protect it from overheating, these openings must not
be blocked by placing the product on the bed, sofa, rug, or other similar
surface. This product should never be placed near or over a radiator or
heat register. This product should not be placed in a built-in installation
where proper ventilation is not provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be abused by persons walking on it.
9. Never push objects of any kind into this product through cabinet slots as
theymaytouchdangerousvoltagepointsorshortoutpartsthatcouldresult
inarisk of fireorelectric shock. Neverspillliquid of anykindon the product.
10. To reduce the risk of electric shock, do not disassemble this product.
Opening or removing cabinet parts other than specified access doors may
expose you to dangerous voltages or other risks. Incorrect reassemb-ling
can cause electric shock when the appliance is subsequently used.
11. Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
Important Safety Instructions
2
12. Unplug this product from the wall outlet and refer servicing to VTECH
under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, because improper adjustment of other controls
may result in damage and will often require extensive work to restore
the product to normal operation.
E. If the product has been dropped and the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
VTECH COMMUNICATIONS INC.
CUSTOMER SERVICE at 1-800-595-9511. In Canada, call VTech Electronics
Ltd. at 1-800-267-7377.
SAVETHESE INSTRUCTIONS
3
The VT5831 is an advanced cordless telephone that operates in the 5.8GHz
frequency range. Your VT5831 is capable of supporting up to a maximum of
6 Handsets. Using additional Handsets, up to three people can be conferenced
on a call (2 Handsets and the Base Speakerphone), or two extensions can be
conferenced on a call, while two other extensions can be talking internally, using
the Intercom feature.
This manual is designed to familiarize you with the VT5831 cordless telephone.
We strongly recommend you read the manual before using your phone.
To order additional system Handsets (model# VT 5820), battery
packs, or headsets, call VTech Communications Inc at 1-800-595-
9511.
Introduction
IMPORTANT
Please record the Base ID#(BS ID) printed on the underside of the 5831 Base
in the space below. Please be certain to include all 15 digits/characters.
Base ID #
4
Parts Check List
7. Belt clip
8. Base Wall Mounting Bracket
9. ChargerWallMountingBracket
10. Owner's Manual
11. Battery Pack
To purchase replacement battery packs, call VTech Communications Inc.
at 1-800-595-9511. In Canada, call VTech Electronics Ltd. at 1-800-267-7377.
1. Base Unit
2. Handset
3. Charger AC Power Adapter
4. Charger
5. Base AC Power ADapter
6. Telephone Cord
Telephone Line Cord
Base AC Power Adapter
Battery Pack
Charger Wall
Mounting Bracket
Owners Manual
OWNE S MANUAL
Base Wall Mounting
Bracket
Belt Clip
Handset
Base Unit
Chargser AC Power Adapter
Chargser
5
The Handset Layout
1. Antenna
2. Earpiece
3. Headset Jack (2.5mm)
4. On (Flash)
5. Dialing Key(0-9)
6. Speaker Phone
7. LCD Display
8. Soft keys
9. Volume key
10. Off (Clear)
11. Sound Select key
12. Microphone
1
2
3
4
5
6
7
8
11
12
9
10
6
1. Antenna
2. LCD Display
3. Clear
4. In use
5. Flash
6. Hold
7. Redial
8. Mute
9. Messages
10. Intercom
11. Soft keys
12. Speaker Phone
13. Dialing Keys (0-9)
14. Volume Keys
15. Telephone Jack
16. DC Connector
17. Spare Battery drawer
18. Spare Battery Release
The Base Unit Layout
1
2
3
4
6
7
8
5
9
10
11
12
13
14
17
18
16
15
7
Setup
1. Plug the AC power adapter into an electrical outlet, and the DC connector
into the back of the base unit.
Connecting to phone line
Plug one end of the telephone line cord into the jack on the back of the base
unit. Plug the other end of this cord into the wall jack.
Checking for dial tone
Afterthebattery is chargedpress
ON
onthe Handset. The Phone icon will
appear on the handset display, and you will hear dial tone. If not, see In Case
of Difficulty.
Tone/Pulse selection
See BASE SETTINGS for details.
CAUTION: Use only the Vtech power supply provided with your telephone.
Getting Started
IMPORTANT:
FOR MAXIMUM PERFORMANCE OF YOUR
CORDLESS TELEPHONE SYSTEM:
1. Choose a central location for your Base Unit.
2. Install your Base Unit and Extension Handsets
away from electronic equipment, such as
personal computers, television sets and
microwave ovens.
3. In locations where there are multiple cordless
telephones, separate base units as much as
possible.
4. Install your telephone equipment away from
heat sources and sunlight.
5. Avoid excessive moisture, dust or extreme
cold.
To AC outlet
To telephone
jack
To telephone
socket outlet
AC adapter
8
Getting Started
Follow the steps below:
1. Remove the battery cover by
pressing on the indent and
sliding downward.
2. Placethenewbatterypackinthe
handset with the metal contacts
aligned with the charge contacts
in the battery compartment.
3. Replace the battery cover by
sliding it upwards.
4. If the new battery pack is not
already charged, place the
handset in the base unit, or a
remotechargingstand,andallow
it to charge for 12 hours. After
initial charge, a maintenance
charge of 8 hours should be
sufficient.
Installation of Battery Pack in Handset
The original Handset that is shipped with your VT5831
system will be automatically registered to the Base. This
Handset is HANDSET 1.
As you register additional Handsets to the system, they will be assigned
extension numbers in the following order: HANDSET 2, HANDSET 3, and finally
HANDSET 4.
Whenever a Handset battery pack is installed, the Handset will automatically
begin SEARCHING FOR BASE (if previously registered), or it will prompt you
to ENTER BASE ID to register the new Handset.
9
Spare Battery Charger/Power Backup Function
1. Open the spare battery charger
by pressing the release button,
located on the left-hand side of
theBaseUnit. Adrawerwillopen
to reveal the spare battery
compartment.
2. Place a battery pack in the
drawer with the charge contacts
facing up and to the right.
3. Push the drawer closed.
The spare battery takes 24 hours to
fully charge a drained battery.
The VT5831 uses the spare battery charger in the Base Unit. To provide
operational backup in the event of a power failure with the a fully charged battery
pack in the spare battery charger, you will still be able to place a receive calls
from the handset for up to 5 hours.
The spare battery pack can also be used to replace a drained handset battery,
ensuring uninterrupted use.
NOTE :
When using the VT5831 during Power Backup mode, audio quality may be
compromised due to reduced Power availability.
Getting Started
10
Getting Started
Charging Of Handset Battery Pack
The Handset of your VT5831 cordless telephone is powered by a rechargeable
battery pack. It charges automatically whenever the Handset is in the Base Unit.
You should charge the battery pack for 12 hours when you first receive
your phone. You'll know the battery pack needs charging when:
• The low battery message is displayed :
• The handset seems completely
dead, the LCD is completely
clear and does not activate
when you press the keys.
IMPORTANT:
1. Do not dispose of a battery pack in a fire, the cell may explode.
2. Do not open or mutilate the battery pack. Toxic substances may be
released, causing harm to eyes or skin.
3. Exercise care in handling battery packs in order to prevent an accidental
short of the charge contacts, potentially causing the battery pack to
overheat.
4. Do not dispose of this battery pack into household garbage. Please refer
to the following information concerning proper battery recycling:
Andere Handbücher für vt5831
1
Inhaltsverzeichnis
Andere V-tech Schnurloses Telefon Handbücher
V-tech
V-tech DS6673-2 Bedienungsanleitung
V-tech
V-tech FS6414-A Bedienungsanleitung
V-tech
V-tech vz2652 Bedienungsanleitung
V-tech
V-tech VSP601 Bedienungsanleitung
V-tech
V-tech CS6529 Bedienungsanleitung
V-tech
V-tech 921 ADL Bedienungsanleitung
V-tech
V-tech Telephone Bedienungsanleitung
V-tech
V-tech VT 1980 Bedienungsanleitung
V-tech
V-tech I5808 - Cordless Extension Handset Bedienungsanleitung
V-tech
V-tech CS5219 Bedienungsanleitung
V-tech
V-tech CORDLESS TELEPHONE VT 9152 Bedienungsanleitung
V-tech
V-tech MI6821 - Cordless Telephone With Caller Id Bedienungsanleitung
V-tech
V-tech 9151 - VT Cordless Phone Bedienungsanleitung
V-tech
V-tech FS6220-2 Bedienungsanleitung
V-tech
V-tech MI6889 Bedienungsanleitung
V-tech
V-tech ip5850 - 5.8 GHz DSS Cordless Phone Bedienungsanleitung
V-tech
V-tech CS6124 Bedienungsanleitung
V-tech
V-tech DS6621 Bedienungsanleitung
V-tech
V-tech tz 2551-01 Bedienungsanleitung
V-tech
V-tech 3864-01 Bedienungsanleitung
