Vaccon VP00 Produkthandbuch
Technical Brief: Vacuum System Design:
Choosing The Correct Sized Tubing
© 2014 Vaccon Company
9 Industrial Park Road, Medway, MA 02053 Phone: (508) 359-7200, US (800) 848-8788 Fax: (508) 359-0177
Visit Us Online at www.vaccon.com or email us at inf[email protected]
Technical Brief: How Vacuum Pumps Work
Operating / Installation Instructions:
VP 00-10-20-80-90 Venturi Vacuum Pump Series
Principles of Operaon
Vacuum is produced by forcing compressed air through a liming orifice (nozzle). As the air exits the orifice it
expands, increasing in velocity to supersonic speed before entering the venturi secon (diffuser). This creates
a vacuum at the vacuum inlet port located between the nozzle and diffuser. The nozzle and diffuser combine
to create a venturi vacuum cartridge. The precise fit of the nozzle to the diffuser is crical to the pump
funconing properly.
Operang and Installaon Instrucons:
1: Mount pump to your mounng hardware, end-of-arm-tool,
extrusion, etc. VP00 and VP10 model pumps have two
mounng holes that accept 4-40 (M3) screws. VP20, VP80, and
VP90 pumps have three mounng holes that accept 10-32 (M5)
screws (screws not supplied). Pumps work in any orientaon.
2. Aach air line to air supply port. Aach vacuum line to vacuum port if not directly aaching a vacuum
cup to the port. See chart on page 2 for minimum recommended sizes (tubing outer diameters are
listed).
3. Turn on compressed air and regulate to specified pressure (80 PSI standard, models with “-60”
designaon to 60 PSI – set regulator while pump is operang). The VP pump will generate vacuum
immediately.
Vacuum
Vacuum
Exhaust
Air
Supply
Vacuum
Vacuum
Exhaust
Air
Supply
Vacuum
Exhaust
Air
Supply
Vacuum
Exhaust
Air
Supply
VP00
VP20 VP80/90
VP10
Drawings not to scale
Proudly Made In The USA
Technical Brief: Vacuum System Design:
Choosing The Correct Sized Tubing
Technical Brief: How Vacuum Pumps Work
Operating Instructions: VP 00-10-20-80-90 Series Modular Vacuum Pumps – 2
© 2014 Vaccon Company
The recommended tubing sizes are based on polyethylene or polyurethane tubing with 0.062” [/”, 1.5 mm] wall thickness
Note: Vaccon discourages the use of quick disconnect fings on all connecons
VP00
VP20/80/90
VP10
End Views:
Air Supply
Ports
Top Views:
Vacuum
Ports
Operating / Installation Instructions: VP 00-10-20-80-90
Modular Venturi Vacuum Pump Series
Addional Informaon
VP Series
Model
Air Supply Port
Threads
Recommended
Air Supply Line
(outer diameter)
Vacuum Port
Threads
Recommended
Vacuum Line
(outer diameter)
VP00-60 (M,H) Series 10-32 UNC Female ¼" [6 mm] 10-32 UNC Female ¼" [6 mm]
VP10-(60,90) (L,M,H) Series ¼ NPT ¼" [6 mm] ⅛ NPT ¼" [6 mm]
VP10-(100,150) (L,M,H) Series ¼ NPT ⅜" [10 mm] ⅛ NPT ⅜" [10 mm]
VP20-(60,90) (L,M,H) Series ¼ NPT ¼" [6 mm] ¼ NPT ¼" [6 mm]
VP20-(100,150) (L,M,H) Series ¼ NPT ⅜" [10 mm] ¼ NPT ⅜" [10 mm]
VP80-200 (L,M,H) Series ¼ NPT ⅜" [10 mm] ⅜ NPT ⅜" [10 mm]
VP80-250 (L,M,H) Series ¼ NPT ⅜" [10 mm] ⅜ NPT ½" [12 mm]
VP90-300 (L,M,H) Series ⅜ NPT ½" [12 mm] ½ NPT ½" [12 mm]
VP90-350 (L,M,H) Series ⅜ NPT ½" [12 mm] ½ NPT ½" [12 mm]
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Vaccon Wasserpumpe Handbücher
Beliebte Wasserpumpe Handbücher anderer Marken
Sykes AmeriPumps
Sykes AmeriPumps GP100M Fehlerbehebungshandbuch
DUROMAX
DUROMAX XP WX Series Bedienungsanleitung
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Bedienungsanleitung
Franklin Electric
Franklin Electric IPS Bedienungsanleitung
Xylem
Xylem e-1532 Series Bedienungsanleitung
Milton Roy
Milton Roy PRIMEROYAL Bedienungsanleitung