VADDIO HuddleSHOT Bedienungsanleitung

Complete Manual for the

HuddleSHOT

All-in-One Conferencing Camera

Document 411-0037-30 Rev A

August 2019

Contents

Overview 1

What's in this Guide 1

Features 1

Unpacking the Camera 2

A Quick Look at the Camera 3

Front of the Camera 3

Back of the Camera 3

Installation 4

Don’t Void Your Warranty! 4

Before You Install the Camera 4

Installing the Wall Mount 5

Cabling Notes 5

About Echo Cancellation 6

Basic Connections for Conferencing or Sharing Content 6

Connections for Conferencing Using a Room Audio System 7

Connections for Using the Camera as a Sound Bar 7

Installing the Camera 8

Powering Up the Camera 8

Status Indicator Light 8

Multifunction Button 8

Using the Remote 9

Installing the Batteries 9

Pairing the Remote to the Camera 10

Unpairing the Remote 10

Other Things to Know About the Remote 10

Using the Web Interface 11

Browser Support 11

Getting the Camera's IP Address 11

User Access 12

Administrative Access 13

System Administration 14

Configuring the Camera for Your Network 14

For Non-DHCP Environments: Configuring the Device with a Static IP Address for Initial

Installation 14

Optional For DHCP Environments: Changing from a DHCP Address to a Static IP Address 16

Changing the Camera's Hostname 17

Specifying Time Zone and NTP Server 18

Configuring Security Settings 19

Setting Passwords and Access 19

Enabling or Requiring HTTPS 20

Disabling Telnet Access 20

Adding Room Information to the Screen 21

Saving (Exporting) or Restoring (Importing)a Configuration 21

Rebooting the Camera 23

Installing a Firmware Update 24

Installing a Firmware Update for the Connected Microphone 25

Contacting Vaddio Technical Support 26

Viewing Diagnostic Logs 26

Configuring Camera Behavior 27

Configuring Streaming Behavior 27

Enabling or Disabling Streaming 27

Viewing a Stream 28

Configuring USB Streaming 28

Setting up IPStreaming in Easy Mode 29

Setting up IPStreaming in Custom Mode 30

RTSPStreaming Protocol and URL 31

Configuring RTMP Streaming 32

Changing MTU 34

Managing Audio 35

Muting All Audio Inputs Together 35

Controlling Volume and Muting Per Input or Output 35

Adjusting Performance for Larger Rooms 36

Fine-Tuning Microphone Performance 37

Using the Camera as a Sound Bar 38

Setting up Macros and Triggers 39

Writing and Editing Macros 40

Testing Macros 41

Assigning Macros to Triggers 42

Testing Triggers 43

Setting Other System Behaviors 44

Telnet Serial Command API 45

camera home 46

camera ccu get 46

camera ccu set 47

camera zoom 48

camera dewarp 48

camera color-compensation 49

camera led 49

camera standby 50

audio volume 51

audio mute 52

iii

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

video mute 53

trigger 53

streaming settings get 54

streaming ip enable 55

network ping 55

network settings get 56

system reboot 56

system factory-reset 57

version 57

history 58

help 58

exit 58

Specifications 59

Troubleshooting and Care 60

Power and Control 60

Video and Streaming 60

Audio 61

Remote 61

Restoring Default Camera Settings 61

Operation, Storage, and Care 62

Glossary 63

Compliance and Conformity Statements 67

FCC Part 15 Compliance 67

ICES-003 Compliance 67

European Compliance 68

Warranty and Return Policy 69

Photo Credits 73

Index 74

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

Overview

This guide covers the HuddleSHOT all-in-one conferencing camera – a fixed camera with integrated audio:

nHuddleSHOT camera, North America – 999-50707-000 (black); 999-50707-000G (gray)

nHuddleSHOT camera, Europe and UK – 999-50707-001 (black); 999-50707-001G (gray)

nHuddleSHOT camera, Australia and New Zealand – 999-50707-009 (black); 999-50707-009G (gray)

What's in this Guide

This guide covers

nUnpacking

nPhysical features

nInstallation

nControlling the camera using the IR remote

nWeb interface:System administration and performance/behavior configuration

nSpecifications

nTroubleshooting

nWarranty and compliance/conformity information

Features

nIntuitive operation with attractive, streamlined remote control

nSimultaneous uncompressed USB 3.0 and IP (H.264) video at resolutions up to 1080p/60 with full-

duplex audio streaming

n110° HFOV at 1x with full dewarping; 125° HFOV with no dewarping

nSelectable 1x, 1.5x, or 2x zoom with dewarping option

nEasy configuration, system administration, and remote management via web interface

nIntegrated stereo speakers and phased microphone array

nAdvanced network security features

nAudio input for Vaddio TableMIC or other microphone with EasyMic connectivity

nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,

Mac®OS, and Linux operating systems, compatible with most UC conferencing applications

Unpacking the Camera

Make sure you have received all the items you expected.

Download manuals, dimensional drawings, and other information from www.legrandav.com.

HuddleSHOT, North America– 999-50707-000 (black), 999-50707-000G (gray)

HuddleSHOT, Europe/UK– 999-50707-001 (black), 999-50707-001G (gray)

HuddleSHOT, Australia/NewZealand – 999-50707-009 (black), 999-50707-009G (gray)

nHuddleSHOT camera

nBluetooth remote control

nAAA batteries, qty. 2

nPoE/PoE+ power injector with AC cord set(s)

nUSB 3.0 Type A to Type C cable, 6 ft. (1.8m)

nCat-5e cable, 10 ft. (3 m)

nWall mount with mounting hardware

nQuick Start Guide

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

A Quick Look at the Camera

This section covers the physical features of the camera.

Front of the Camera

Camera – The HuddleSHOT camera offers 1x, 1.5x, and 2x zoom levels.

Status light – The illuminated ring around the lens bezel indicates the camera's current state. The status

light can be turned off in the administrative web interface.

Note

By default, the camera's status indicator light is active during normal operation; however, it can be

configured to remain off when the camera is powered up. The camera may be sending video even if the light

is off.

Left and right speakers – Far-end audio, or content audio when using Sound Bar Mode.

Integrated microphones – No external microphone needed in the typical huddle room, interview room, or

other small space. Echo-canceling microphones pick up the voices of participants up to 10 ft. (3 m) away.

Back of the Camera

Network/PoE+ – RJ-45 connector. Connect to the Power and Data Out port of the PoE+ power injector.

USB 3.0 – USB type C connector. Connect to a computer for use with soft conferencing applications.

Provides uncompressed USB 3.0 stream.

EasyMic – RJ-45 connector. Connect to a TableMIC or other microphone with EasyMic connectivity.

Multifunction button – Momentary pushbutton; used to return from standby, display IP address, pair with

a remote, and restore factory defaults.

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

Installation

This section covers:

nSelecting the location for the camera

nInstalling the mount

nConnection diagrams

nConnecting and mounting the camera

And a required safety note here:

Note

PoE type networks connected to this equipment are for intra-building use only and should not be connected

to lines that run outside of the building in which this product is located.

Don’t Void Your Warranty!

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate

protective enclosure. Do not allow it to come into contact with any liquid.

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these

things happen, return it to Vaddio for safety and functional testing.

Before You Install the Camera

Things to keep in mind when deciding where to install the camera:

nConsider camera viewing angles, lighting conditions, line-of-sight obstructions, and in-wall obstructions

where the camera is to be mounted.

nEnsure that the camera will point away from the ceiling and lights. The camera will not perform well if it

is pointed toward a light source such as a light fixture or window.

Prepare for a successful installation:

nBe sure you can identify all cables correctly.

nCheck Cat-5 cables for continuity.

nTalk to the network administrator. If installing the camera in a non-DHCP network (one that does not

automatically assign IP addresses), you will need to configure the camera with a static IP address as

directed by the network administrator.

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

Installing the Wall Mount

The camera is shipped with a wall mount. Other mounting options are available as well. Contact us if you

don’t have the camera mount you need.

You can install the camera wall mount to a 2-gang wall box or directly to the drywall.

nIf you mount it to drywall, use the wall anchors provided with the wall mount.

nIf you mount it to a wall box, use the cover plate screws supplied with the wall box.

If you install the camera wall mount to drywall, use the wall anchors provided with the mount.

Cabling Notes

Caution

When building cables for Vaddio products, do not use pass-through RJ-45 connectors. If they

are crimped incorrectly, they can cause intermittent connections and degrade signal quality.

Incorrectly crimped pass-through connectors can also damage the connectors on the product,

which will void your warranty.

Intact – will make reliable contact

with cable connector

Damaged – Bent contact fingers

will NOT make reliable contact

with cable connector

Use Cat-5e or better cable. We recommend using high-quality connectors and a high-quality crimping tool.

We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or placed close

sources of electromagnetic interference such as power lines.

Caution

Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment

damage and will void the warranty.

Pro Tip

Label all cables at both ends.

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

About Echo Cancellation

When a microphone picks up the audio from a speaker (far-end audio) during a conference, it sends the far-

end audio back to the participants at the far end, creating an echo. Acoustic echo cancellation prevents

this.

Here's how it works:

1. The speaker feeds the far-end audio into the room. This signal also goes to the audio processor as the

reference that needs to be canceled.

2. The audio processor inverts the signal and sends it to the microphone.

3. The sum of the audio that the microphone picks up from the speaker and the inverted signal is 0: The

echo is canceled.

With the audio from the speaker canceled out, the audio from the microphone includes only the sounds

originating at your end of the conference.

Basic Connections for Conferencing or Sharing Content

This diagram shows a basic conferencing configuration for the HuddleSHOT all-in-one conferencing

camera. A participant's laptop provides USB connectivity and the HDMI output to the room's display. The

optional TableMIC microphone, shipped with a 25 ft (7.6 m) cable, allows for more flexibility in the room

layout. This system provides acoustic echo cancellation, with or without the TableMIC microphone.

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

Andere Handbücher für HuddleSHOT

Inhaltsverzeichnis

Andere VADDIO IP-Kamera Handbücher

VADDIO

VADDIO CLEARVIEW HD-20SE Bedienungsanleitung

VADDIO

VADDIO ClearSHOT 10 USB Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT 10 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT IW Bedienungsanleitung

VADDIO

VADDIO ClearSHOT 10 USB Bedienungsanleitung

VADDIO

VADDIO HuddleSHOT Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12 Bedienungsanleitung

VADDIO

VADDIO ZOOMSHOT 30 Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT 10 Bedienungsanleitung

VADDIO

VADDIO WallVIEW HD-USB SR System Bedienungsanleitung

VADDIO

VADDIO ClearVIEW 999-6990-000 Bedienungsanleitung

VADDIO

VADDIO WALLVIEW PRO Z700 WITH HSDS Bedienungsanleitung

VADDIO

VADDIO WideShot WallView SR 999-6910-000 Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT 10 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12 Bedienungsanleitung

VADDIO

VADDIO ClearSHOT 10 USB Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung