Vaisala HMP231 Kurzanleitung

Legacy configuration codes Valid from 25th February 2003

HMP231 Humidity and Temperature Transmitter

For wall mounting

Industrial humidity and temperature transmitter HMP231 A A PRICE

Transmitter RH+T A

type RH+T+Td B

RH+T+a+Tw+x C

H+T+Td+a+Tw+x+h

H+T+h

Display

odisplay 1

isplay on transmitter cover 2

Probe length

20 mm

Power supply & 24 V, no connectors 0

connectors 24 V, shared connector for power supply and analog outputs 4

Using serial interface: 24 V, connector for RS232C 8

24 V, 2 connectors: RS232C and analog outputs+power supply 9

24 V, 2 connectors shared for power supply and RS485 9

Serial interface

S 232C

S 485/RS 422 B

urrent loop

Sensor protection

intered stainless steel filter (16452) 1

PS plastic grid & stainless steel netting (16720HM) 2

PS plastic grid (16562) 3

Analog output

...20 mA

signals

...20 mA

(Ch1 and Ch2)

...1 V

...5 V

...10 V

channel 1

channel 2

Parameters for the

H (0...100 %RH) 1 1

analog outputs

(range: see below) 2 2

(If available in the

d (-40...+60 °C) (-40...+140 °F) 3 3

chosen transmitter

(0...160 g/m3) (0...69.9 gr/ft3) 4 4

type)

w (0...+60 °C) (+32...+140 °F) 5 5

(0...160 g/kg d.a.) (0...1120 gr/lb) 6 6

(-40...+460 kJ/kg) (-17.2...+197.8 Btu/lb) 7 7

(Ch1 and Ch2) channel 1

channel 2

Analog output range

20...+60 °C (-4...+140 °F) A

for temperature

40...+60 °C (-40...+140 °F)

...+60 °C (+32...+140 °F)

Units (local display

etric 1

and serial interface)

on-metric 2A

Regaining option *)

o regaining (HUMICAP K) 3

and sensor type

egaining (HUMICAP KC) 2

Manual language

o manual A

nglish B

erman C

rench D

innish E

TOTAL

*) Humidity sensor regaining can be used to reduce the effects of some chemical contaminants. QTY

If the regaining option is chosen, the sensor must be protected either with a sintered filter or

OTAL VALUE

with a PPS plastic grid with steel netting; the PPS plastic grid can not be used.

For further information about this option, please see product data sheet or contact Your Vaisala representative.

Selections in bold are included in the prices of the basic versions.

Selections in italic are available at an extra price.

Example of order code with typical settings:

MP231

A12A1A3B

End customer:

Legacy configuration codes Valid from 25th February 2003

HMP233 Humidity and Temperature Transmitter

With compact probe

Industrial humidity and temperature transmitter HMP233 PRICE

Transmitter RH+T A

type RH+T+Td B

RH+T+a+Tw+x C

H+T+Td+a+Tw+x+h D

H+T+h

Display

odisplay 1

isplay on transmitter cover 2

Probe cable length

m cable, +80 °C (176 °F)

m cable, +80 °C (176 °F) B

0 m cable, +80 °C (176 °F)

m cable, +120 °C (+248°F)

m cable, +120 °C (+248°F) E

0 m cable, +120 °C (+248°F)

Power supply, 24 V, no connectors 0

alarm output & 115 V, no connectors 1

connectors 230 V, no connectors 2

24 V, + alarm output unit (no connectors) 3

24 V, shared connector for power supply and analog outputs 4

24 V, as above + alarm output unit not on connector 5

115 V, connector for analog outputs 6

230 V, connector for analog outputs 7

Using serial interface: 24 V, connector for RS232C 8

24 V, 2 connectors: RS232C and analog outputs+power supply 9

24 V, 2 connectors shared for power supply and RS485 9

Serial interface

S 232C

S 485/RS 422 B

urrent loop

Sensor protection

PS plastic grid & stainless steel netting (16720HM) 2

Analog output

...20 mA

signals

...20 mA B B

(Ch1 and Ch2)

...1 V C C

...5 V D D

...10 V E E

hannel 1

hannel 2

Parameters for the

H (0...100 %RH)

analog outputs

(range: see below)

(If available in the

d (-40...+100 °C) (-40...+212 °F)

chosen tranmitter

(0...600 g/m3) (0...262 gr/ft3)

type)

w (0...+100 °C) (+32...+212 °F)

(0...500 g/kg d.a.) (0...3500 gr/lb d.a.)

(-40...1500 kJ/kg) (-17.2...644.9 Btu/lb)

(Ch1 and Ch2) channel 1

channel 2

Analog output range

20...+80 °C

(

-4...+176 °F) A

for temperature

20...+120 °C

(

-4...+248 °F)

40...+80 °C

(

-40...+176 °F)

40...+120 °C

(

-40...+248 °F)

40...+60 °C

(

-40...+140 °F) E

...+100 °C

(

+32...+212 °F) F

Units (local display

etric

and serial interface)

on-metric

Installation kit for

duct mounting

es: for +80 °C cable (+176 °F)

es: for +120 °C cable (+248 °F) C

Regaining option *)

o regaining (HUMICAP K)

and sensor type

egaining (HUMICAP KC)

Manual language

o manual A

nglish

erman

rench

innish E

TOTAL

*) Humidity sensor regaining can be used to reduce the effects of some chemical contaminants. QTY

If the regaining option is chosen, the sensor must be protected either with a sintered filter or TOTAL VALUE

with a PPS plastic grid with steel netting; the PPS plastic grid can not be used.

Please note that if mains power (115/230V) is selected regaining cannot be used.

For further information about this option, please see product data sheet or contact Your Vaisala representative.

Selections in bold are included in the prices of the basic versions.

Selections in italic are available at an extra price.

xample of order code with typical settings:

HMP233

End customer:

Legacy configuration codes Valid from 25th February 2003

HMP234 Humidity and Temperature Transmitter

With pressure tight high temperature probe

Industrial humidity and temperature transmitter HMP234 1 A PRICE

Transmitter RH+T A

type RH+T+Td B

RH+T+a+Tw+x C

H+T+Td+a+Tw+x+h D

H+T+h F

Display

odisplay 1

isplay on transmitter cover 2

Probe cable length

m cable, +180 °C (+356 °F) A

m cable, +180 °C (+356 °F) B

0 m cable, +180 °C (+356 °F) C

Power supply, 24 V, no connectors 0

alarm output & 115 V, no connectors 1

connectors 230 V, no connectors 2

24 V, + alarm output unit (no connectors) 3

24 V, shared connector for power supply and analog outputs 4

24 V, as above + alarm output unit not on connector 5

115 V, connector for analog outputs 6

230 V, connector for analog outputs 7

Using serial interface: 24 V, connector for RS232C 8

24 V, 2 connectors: RS232C and analog outputs+power supply 9

24 V, 2 connectors shared for power supply and RS485 9

Serial interface

S 232C

S 485/RS 422 B

urrent loop C

Sensor protection

intered stainless steel filter (16452) 1

Analog output

...20 mA

signals

...20 mA B B

(Ch1 and Ch2)

...1 V C C

...5 V D D

...10 V E E

hannel 1

hannel 2

Parameters for the

H (0...100 %RH) 1 1

analog outputs

(range: see below) 2 2

(Ch1 and Ch2)

d (-40...+100 °C) (-40...+212 °F) 3 3

(0...600 g/m3) (0...+262 gr/ft3) 4 4

w (0...+100 °C) (+32...+212 °F) 5 5

(0...500 g/kg d.a.) (0...3500 gr/lb d.a.) 6 6

(-40...1500 kJ/kg) (-17.2...644.9 Btu/lb) 7 7

channel 1

channel 2

Analog output range

20...+80 °C (-4...+176 °F)

for temperature

20...+120 °C (-4...+248 °F) B

20...+180 °C (-4...+356 °F) C

40...+80 °C (-40...+176 °F) D

40...+120 °C (-40...+248 °F) E

40...+180 °C (-40...+356 °F)

Units (local display

etric 1

and serial interface)

on-metric 2A

Regaining option *)

o regaining (HUMICAP K)

and sensor type

egaining (HUMICAP KC)

Manual language

o manual A

nglish

erman

rench

innish E

TOTAL

*) Humidity sensor regaining can be used to reduce the effects of some chemical contaminants. QTY

Please note that if mains power (115/230V) is selected regaining cannot be used.

For further information about this option, please see product data sheet or contact Your Vaisala representative. TOTAL VALUE

Selections in bold are included in the prices of the basic versions.

Selections in italic are available at an extra price. Example of order code with typical settings:

HMP234A1A0

End customer:

Legacy configuration codes Valid from 25th February 2003

HMP235 Humidity and Temperature Transmitter

With high temperature probe

Industrial humidity and temperature transmitter HMP235 PRICE

Transmitter RH+T A

type RH+T+Td B

RH+T+a+Tw+x C

RH+T+Td+a+Tw+x+h

RH+T+h F

Display no display

display on transmitter cover

Probe cable length 2 m cable, +180 °C (+356 °F) A

5 m cable, +180 °C (+356 °F)

10 m cable, +180 °C (+356 °F) C

Power supply, 24 V, no connectors

alarm output & 115 V, no connectors 1

connectors 230 V, no connectors 2

24 V, + alarm output unit (no connectors) 3

24 V, shared connector for power supply and analog outputs 4

24 V, as above + alarm output unit not on connector 5

115 V, connector for analog outputs 6

230 V, connector for analog outputs 7

Using serial interface: 24 V, connector for RS232C 8

24 V, 2 connectors: RS232C and analog outputs+power supply 9

24 V, 2 connectors shared for power supply and RS485 9

Serial interface RS 232C A

RS 485/RS 422 B

current loop C

Sensor protection sintered stainless steel filter (16452) 1

PPS plastic grid & stainless steel netting (16720HM) 2

Analog output 4...20 mA

signals 0...20 mA B B

(Ch1 and Ch2) 0...1 V C C

0...5 V D D

0...10 V

channel 1

channel 2

Parameters for the RH (0...100 %RH) 1 1

analog outputs T (range: see below) 2 2

(If available in the Td (-40...+100 °C) (-40...+212 °F) 3 3

chosen transmitter a (0...600 g/m3) (0...+262 gr/ft3) 4 4

type) Tw (0...+100 °C) (+32...+212 °F) 5 5

x (0...500 g/kg d.a.) (0...3500 gr/lb d.a.) 6 6

h (-40...1500 kJ/kg) (-17.2...644.9 Btu/lb) 7 7

(Ch1 and Ch2) channel 1

channel 2

Analog output range -20...+180 °C (-4...+356 °F)

for temperature 0...+180 °C (+32...+356 °F) B

Units (local display metric 1

and serial interface) non-metric 2

Installation kit no installation kit

aluminium flange B

steel flange

Regaining option *) no regaining (HUMICAP K) 3

and sensor type regaining (HUMICAP KC) 2

Manual language No manual A

English B

German C

French D

Finnish E

OTAL

*) Humidity sensor regaining can be used to reduce the effects of some chemical contaminants.

If the regaining option is chosen, the sensor must be protected either with a sintered filter or

OTAL VALUE

with a PPS plastic grid with steel netting; the PPS plastic grid can not be used.

Please note that if mains power (115/230V) is selected regaining cannot be used.

For further information about this option, please see product data sheet or contact Your Vaisala representative.

Selections in bold are included in the prices of the basic versions.

Selections in italic are available at an extra price. Example of order code with typical settings:

HMP235 A

End customer:

Legacy configuration codes Valid from 25th February 2003

HMP237 Humidity and Temperature Transmitter

With compact probe for demanding environments

Industrial humidity and temperature transmitter HMP237 PRICE

Transmitter RH+T A

type RH+T+Td B

RH+T+a+Tw+x C

H+T+Td+a+Tw+x+h D

H+T+h F

Display

odisplay 1

isplay on transmitter cover 2

Probe cable length

m cable, +180 °C (+356 °F) A

m cable, +180 °C (+356 °F) B

0 m cable, +180 °C (+356 °F) C

Power supply, 24 V, no connectors 0

alarm output & 115 V, no connectors 1

connectors 230 V, no connectors 2

24 V, + alarm output unit (no connectors) 3

24 V, shared connector for power supply and analog outputs 4

24 V, as above + alarm output unit not on connector 5

115 V, connector for analog outputs 6

230 V, connector for analog outputs 7

Using serial interface: 24 V, connector for RS232C 8

24 V, 2 connectors: RS232C and analog outputs+power supply 9

24 V, 2 connectors shared for power supply and RS485 9

Serial interface

S 232C

S 485/RS 422 B

urrent loop C

Sensor protection

intered stainless steel filter (16452) 1

PS plastic grid & stainless steel netting (16720HM) 2

Analog output

...20 mA

signals

...20 mA B B

(Ch1 and Ch2)

...1 V C C

...5 V D D

...10 V E E

hannel 1

hannel 2

Parameters for the

H (0...100 %RH) 1 1

analog outputs

(range: see below) 2 2

(If available in the

d (-40...+100 °C) (-40...+212 °F) 3 3

chosen transmitter

(0...600 g/m3) (0...+262 gr/ft3) 4 4

type)

w (0...+100 °C) (+32...+212 °F) 5 5

(0...500 g/kg d.a.) (0...3500 gr/lb d.a.) 6 6

(-40...1500 kJ/kg) (-17.2...644.9 Btu/lb) 7 7

(Ch1 and Ch2) channel 1

channel 2

Analog output range

20...+80 °C

(

-4...+176 °F)

for temperature

20...+120 °C

(

-4...+248 °F) B

20...+180 °C

(

-4...+356 °F) C

40...+80 °C

(

-40...+176 °F) D

40...+120 °C

(

-40...+248 °F) E

40...+180 °C

(

-40...+356 °F)

...+100 °C

(

+32...+212 °F) G

Units (local display

etric 1

and serial interface)

on-metric 2

Installation kit

o A

or duct mounting B

Regaining option *)

o regaining (HUMICAP K)

and sensor type

egaining (HUMICAP KC)

Manual language

o manual A

nglish

erman

rench

innish E

TOTAL

*) Humidity sensor regaining can be used to reduce the effects of some chemical contaminants. QTY

If the regaining option is chosen, the sensor must be protected either with a sintered filter or TOTAL VALUE

with a PPS plastic grid with steel netting; the PPS plastic grid can not be used.

Please note that if mains power (115/230V) is selected regaining cannot be used.

For further information about this option, please see product data sheet or contact Your Vaisala representative.

Selections in bold are included in the prices of the basic versions.

Selections in italic are available at an extra price.

Example of order code with typical settings:

HMP237A1A0

12B1A

End customer:

Legacy configuration codes Valid from 25th of February 2003

HMP238 Humidity and Temperature Transmitter

With pressure tight high temperature probe for pipeline installations

Industrial humidity and temperature transmitter HMP238 1PRICE

Transmitter RH+T A

type RH+T+Td B

RH+T+a+Tw+x C

H+T+Td+a+Tw+x+h D

H+T+h F

Display

odisplay

isplay on transmitter cover 2

Probe cable length

m cable, +180 °C (+356 °F) A

m cable, +180 °C (+356 °F)

0 m cable, +180 °C (+356 °F) C

Power supply, 24 V, no connectors

alarm output & 115 V, no connectors 1

connectors 230 V, no connectors 2

24 V, + alarm output unit (no connectors) 3

24 V, shared connector for power supply and analog outputs 4

24 V, as above + alarm output unit not on connector 5

115 V, connector for analog outputs 6

230 V, connector for analog outputs 7

Using serial interface: 24 V, connector for RS232C 8

24 V, 2 connectors: RS232C and analog outputs+power supply 9

24 V, 2 connectors shared for power supply and RS485 9

Serial interface

S 232C

S 485/RS 422

urrent loop C

Sensor protection

intered stainless steel filter (16452)

Analog output

...20 mA

signals

...20 mA B B

(Ch1 and Ch2)

...1 V C C

...5 V D D

...10 V

channel 1

channel 2

Parameters for the

H (0...100 %RH) 1 1

analog outputs

(range: see below) 2 2

(If available in the

d (-40...+100 °C) (-40...+212 °F) 3 3

chosen transmitter

(0...600 g/m3) (0...+262 gr/ft3) 4 4

type)

w (0...+100 °C) (+32...+212 °F) 5 5

(0...500 g/kg d.a.) (0...3500 gr/lb d.a.) 6 6

(-40...1500 kJ/kg) (-17.2...644.9 Btu/lb) 7 7

(Ch1 and Ch2) channel 1

channel 2

Analog output range

20...+80 °C (-4...+176 °F)

for temperature

20...+120 °C (-4...+248 °F) B

20...+180 °C (-4...+356 °F) C

40...+80 °C (-40...+176 °F) D

40...+120 °C (-40...+248 °F)

40...+180 °C (-40...+356 °F) F

Units (local display

etric 1

and serial interface)

on-metric 2

Installation kit

o installation kit A

all valve set for pipeline installations

Regaining option *)

o regaining (HUMICAP K) 3

and sensor type

egaining (HUMICAP KC) 2

Manual language

o manual A

nglish B

erman C

rench D

innish E

TOTAL

*) Humidity sensor regaining can be used to reduce the effects of some chemical contaminants.

If the regaining option is chosen, the sensor must be protected either with a sintered filter or TOTAL VALUE

with a PPS plastic grid with steel netting; the PPS plastic grid can not be used.

Please note that if mains power (115/230V) is selected regaining cannot be used.

For further information about this option, please see product data sheet or contact Your Vaisala representative.

Selections in bold are included in the prices of the basic versions.

Selections in italic are available at an extra price. Example of order code with typical settings:

HMP235 A

1A3

End customer:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vaisala Sender Handbücher

Vaisala

Vaisala WAC155 Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMT360 SERIES Installations- und Betriebsanleitung

Vaisala

Vaisala HMD60 Series Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMT360 SERIES Bedienungsanleitung

Vaisala

Vaisala HMD62 Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMT330 SERIES Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMT130 Bedienungsanleitung

Vaisala

Vaisala AQT530 Bedienungsanleitung

Vaisala

Vaisala INTERCAP HMW82 Bedienungsanleitung

Vaisala

Vaisala WS425 F/G Bedienungsanleitung

Vaisala

Vaisala HMP243 Bedienungsanleitung

Vaisala

Vaisala AQT530 Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMT120 Series Bedienungsanleitung

Vaisala

Vaisala DRYCAP DMT345 Bedienungsanleitung

Vaisala

Vaisala WAC155 Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMD70U Bedienungsanleitung

Vaisala

Vaisala PDT101 Bedienungsanleitung

Vaisala

Vaisala Humicap HMW60U Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMD70U Bedienungsanleitung

Vaisala

Vaisala hmdw110 series Bedienungsanleitung

Vaisala

Vaisala WXT530 Series Bedienungsanleitung

Vaisala

Vaisala DRYCAP DMT143 Bedienungsanleitung

Vaisala

Vaisala WXT510 Bedienungsanleitung

Vaisala

Vaisala HUMICAP HMT360 SERIES Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung