Vaisala CA10 Bedienungsanleitung

EN
FI
M212461EN-B
Quick Guide
Cloud Access Point
CA10

PUBLISHED BY
Vaisala Oyj
Vanha Nurmijärventie 21, FI-01670 Vantaa, Finland
P.O. Box 26, FI-00421 Helsinki, Finland
+358 9 8949 1
Visit our Internet pages at www.vaisala.com.
© Vaisala 2020
No part of this document may be
reproduced, published or publicly
displayed in any form or by any means,
electronic or mechanical (including
photocopying), nor may its contents be
modified, translated, adapted, sold or
disclosed to a third party without prior
written permission of the copyright holder.
Translated documents and translated
portions of multilingual documents are
based on the original English versions. In
ambiguous cases, the English versions are
applicable, not the translations.
The contents of this document are subject
to change without prior notice.
Local rules and regulations may vary and
they shall take precedence over the
information contained in this document.
Vaisala makes no representations on this
document’s compliance with the local
rules and regulations applicable at any
given time, and hereby disclaims any and
all responsibilities related thereto.
This document does not create any legally
binding obligations for Vaisala towards
customers or end users. All legally binding
obligations and agreements are included
exclusively in the applicable supply
contract or the General Conditions of Sale
and General Conditions of Service of
Vaisala.
This product contains software developed
by Vaisala or third parties. Use of the
software is governed by license terms and
conditions included in the applicable
supply contract or, in the absence of
separate license terms and conditions, by
the General License Conditions of Vaisala
Group.
This product may contain open source
software (OSS) components. In the event
this product contains OSS components,
then such OSS is governed by the terms
and conditions of the applicable OSS
licenses, and you are bound by the terms
and conditions of such licenses in
connection with your use and distribution
of the OSS in this product. Applicable OSS
licenses are included in the product itself
or provided to you on any other applicable
media, depending on each individual
product and the product items delivered
to you.

Table of contents
English.............................................................................................................................................5
Suomi.............................................................................................................................................. 9
Regulatory compliance.............................................................................................................13
3

4 M212461EN-B

CA10 Quick Guide
This document is a quick guide for installation of CA10 Cloud Access Point.
Detailed instructions for its use are available in the jade.vaisala.com online help.
More information and downloadable documents are available from the product
page: www.vaisala.com/ca10
CA10 product overview
Cloud Access Point CA10 is a wireless networking hardware device intended for connecting
CWL100 data loggers to Vaisala Jade Smart Cloud service. Do not modify the device or use it
in ways not described in the product documentation.
CA10 access points and CWL100 data loggers are associated with a specific cloud account
when they are purchased, so there is no need for the user to do any device pairing.
CA10 requires an Internet connection for operation. If there is no
network available at the installation location, you can provide the connection
using a suitable mobile router. Note these specific network requirements:
• The connected network must provide the IP address automatically using
DHCP.
• CA10 must be able to connect to TCP port 443 (for Jade Smart Cloud service)
and UDP port 123 (for Network Time Protocol service) through the network
firewall.
CAUTION!
Table 1 Installation safety specifications
Property Specification
Operating environment Indoor use
Use in wet locations No
Operating temperature −20 … +60 °C (−4 … +140 °F)
Storage temperature −20 … +60 °C (−4 … +140 °F)
Operating humidity 0 … 90 %RH, non-condensing
Operating altitude Max. 2000 m (6500 ft)
Pollution degree 2
IP rating IP30
Operating voltage using dedicated power
supply connector
10 … 30 VDC
PoE power class Class 0
Power consumption Max. 13 W
Frequency band See type label on device
5
ENGLISH

Installing CA10
Required tools:
• Mounting kit 245679 (included in CA10 delivery package)
• Hand tools for mounting with screws:
• Power drill with Ø 6 mm drill bit
• Crosshead screwdriver
Scan the QR code to watch a video of the installation:
dreambroker.com/channel/sdz96ad5/58r18uad
1. Attach CA10 to its mounting location using the most suitable mounting option. Ensure the
unit is securely fixed if you are mounting it higher than 2 m (approx. 6 ft) or in a location
where it would pose a hazard if dropped.
A
B
30 [1.18]
Ø 6 [0.24]
mm
[in]
Figure 1 CA10 mounting methods
AMounting with wall plugs and screws (use at least 2 screws)
BMounting with cable ties
2. Point the antenna up or down for best wireless performance.
6 M212461EN-B

3. Connect CA10 to the network using an Ethernet cable.
4. If the Ethernet cable does not provide power, connect the DC power supply:
a. Connect the plug to the power supply connector of CA10. Make sure the plug is
oriented correctly and goes in all the way.
b. Rotate the power plug slightly to lock it to the connector.
c. Connect the power supply to the wall socket.
10–30 V dEthernet
Internet
4G
A
B
5. If necessary, secure the power supply so it does not fall or hang on its cable.
6. Wait for the access point to start up.
7. Make sure the power LED is green and the lower part of the display shows the text
Connected to cloud.
Red LED indicates that CA10 has a connectivity problem and has turned o its radio. No
data loggers can be connected until CA10 establishes an Internet connection and the LED
is green again.
CA10 IP address
192.168.137.184
Connected data loggers
3
Connected to cloud
o ipsumo ipsum
CA10 IP address
No connection
Not connected to NTP
Connected data loggers
0
Not connected to cloud
m ipsum
10 ... 20 min
8. CA10 is now ready to connect CWL100 data loggers to Jade Smart Cloud. Data loggers
that do not already have a connection will connect to this access point, up to the
maximum capacity of 32 data loggers. It will take at least a few minutes for a data logger
to be connected. If a data logger is in power save mode, the connection will take up to an
hour.
7
ENGLISH

Range of the wireless connection
Range of the wireless connection between a CA10 access point and CWL100 data logger is 100
meters (328 ft) in a typical indoor space. In an open space with line-of-sight and no interfering
structures, the range can be over 500 m (1640 ft).
100+ m
CA10
CWL100
To extend the signal coverage, use multiple access points. This will also allow data
loggers to automatically switch to an access point with a stronger signal if the
connection is unstable. You can have up to 8 access points in the same area (in
range of each other) but you must set each of them to their own radio channel.
You can change the channel using the Jade service after you have connected the
CA10 to the Internet.
8 M212461EN-B

CA10 Pikaopas
Tämä on CA10–pilvitukiaseman pikaopas. Lisää ohjeita laitteen käyttöön on
saatavilla jade.vaisala.com –palvelun ohjeesta.
Lisätietoja ja ladattavia dokumentteja on saatavilla myös tuotesivulta:
www.vaisala.com/ca10
Yleistä CA10-tukiasemasta
CA10-tukiasema on verkkolaite joka luo langattoman verkon CWL100 dataloggereiden
yhdistämiseksi Vaisalan Jade Smart Cloud -palveluun. Älä muuntele laitetta tai käytä sitä
muuhun kuin tuotedokumentaatiossa kuvattuun tarkoitukseen.
CA10-tukiasemat ja CWL100-dataloggerit toimitetaan valmiiksi yhdistettynä ostajan
pilvipalvelun tiliin, joten käyttäjän ei tarvitse parittaa laitteita toisiinsa.
CA10 tarvitsee Internet-yhteyden toimiakseen. Jos asennuspaikalla
ei ole saatavilla verkkoyhteyttä, voit käyttää tarkoitukseen sopivaa
mobiilireititintä. Huomaa seuraavat vaatimukset:
• Käytetyn verkon tulee antaa IP-osoite automaattisesti käyttäen DHCP-
protokollaa.
• CA10:n on voitava muodostaa yhteyksiä verkon palomuurin läpi TCP-porttiin
443 (Jade Smart Cloud -palvelu) sekä UDP-porttiin 123 (Network Time
Protocol -palvelu).
VAROITUS
Taulukko 2 Asennuksen turvallisuustiedot
Ominaisuus Kuvaus/arvo
Käyttöympäristö Sisätila
Käyttö märissä tiloissa Ei
Käyttölämpötila −20 … +60 °C
Säilytyslämpötila −20 … +60 °C
Käyttökosteus 0–90 %RH, kondensoitumaton
Käyttökorkeus Enintään 2000 m
Likaantumisaste 2
IP-luokka IP30
Käyttöjännite erillisen virtalähteen liittimestä 10–30 VDC
PoE-teholuokka Luokka 0
Tehonkulutus Enintään 13 W
Taajuusalue Katso laitteen merkinnät
9
SUOMI

CA10–tukiaseman asennus
Tarvittavat työkalut:
• Asennussarja 245679 (sisältyy CA10:n pakkaukseen)
• Käsityökalut ruuviasennukseen:
• Porakone ja 6 mm:n poranterä
• Ristipääruuvimeisseli
Skannaa QR-koodi nähdäksesi asennusvideon:
dreambroker.com/channel/sdz96ad5/58r18uad
1. Kiinnitä CA10–tukiasema asennuspaikkaan käyttäen parhaiten soveltuvaa asennustapaa.
Jos asennat laitteen yli 2 m korkeudelle tai paikkaan jossa sen putoaminen olisi vaarallista,
varmista, että se pysyy tukevasti paikoillaan.
A
B
30
Ø 6
mm
Kuva 2 CA10:n asennustavat
AAsennus käyttäen ruuveja ja seinätulppia (käytä vähintään kahta ruuvia)
BAsennus käyttäen nippusiteitä
10 M212461EN-B
Inhaltsverzeichnis
Sprachen:
Andere Vaisala Drahtloser Zugangspunkt Handbücher
Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti
Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco
Cisco Aironet 1550 Series Bedienungsanleitung

Aruba
Aruba IAP-335 Bedienungsanleitung

Advantek Networks
Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM
IP-COM AP355 Bedienungsanleitung

Buffalo
Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius
EnGenius EnStationACv2 Bedienungsanleitung

D-Link
D-Link DAP-3662 Bedienungsanleitung

xG Technology
xG Technology xMax CN1300 Bedienungsanleitung

Widelink
Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax
Edimax CAP1200 Bedienungsanleitung









