Valor EXTREME DUTY TPMS Betriebsanleitung

EXTREME DUTY TPMS - Programming Guide

1-800-568-9188

4320 Harvester Rd., Floor 2

Burlington, ON, L7L 5S4, Canada

Pro V2.2

Truck

PROGRAMMING GUIDE – EXTREME DUTY TPMS

Table of Contents

Programming the CANbus Transceiver using the SmarTool

Main Menu.................................................................................................................................................................4

SmarTool Setup .........................................................................................................................................................5

System Setup ...........................................................................................................................................................6

Step 1: Read CANbus ID........................................................................................................................................... 7

Step 1.1.....................................................................................................................................................................7

Step 1.2 ....................................................................................................................................................................8

Step 2: Read Sensor ID/Set Positions .......................................................................................................................9

Step 2.1...................................................................................................................................................................10

Step 3: Uploading to Valor CANbus Memory............................................................................................................ 11

Step 3.1...................................................................................................................................................................12

Step 4: Program Valor CANbus Transceiver ............................................................................................................ 13

Step 4.1...................................................................................................................................................................14

Step 4.2...................................................................................................................................................................14

 Step5:ConrmProgramming.................................................................................................................................. 15

Step 6: Baseline Setup ............................................................................................................................................16

Step 6.1...................................................................................................................................................................17

PROGRAMMING GUIDE – EXTREME DUTY TPMS

Intro: Programming the CANbus Transceiver using the SmarTool

1. These instructions apply only to Valor CANbus

Transceivers (Figure 1) that require a Valor SmarTool

for sensor programming.

2. The SmarTool must be updated to the latest software

version (Pro 2.2 or higher). To check the software

version on your SmarTool simply press the on/off

button. The firmware version of the device will display

on screen Figure 1A.

Figure 1

Figure 1A

Pro V2.2

Truck

PROGRAMMING GUIDE – EXTREME DUTY TPMS

Main Menu

1. Once the SmarTool is turned on, the Start menu should

be the same as that shown in Figure 2.

2. This is the home screen and it lists 7 possible

selections as you scroll down the menu using the up/

down arrow keys.

‣Sensor 1/7

‣Vehicle ID 2/7

‣ID Learning 3/7

‣Check ID 4/7

‣Baseline 5/7

‣Download 6/7

‣System Set 7/7

Sensor 1/7

Vehicle ID

ID Learning

Check ID

Figure 2

PROGRAMMING GUIDE – EXTREME DUTY TPMS

SmarTool Setup

These instructions are for rst use only to setup the

SmarTool:

1. In main menu scroll to “System Set” (Item 7/7)

2. Press ENTER

3. Set up units of measure, select “Set Unit” (C/PSI)

4. Press ENTER

5. Default settings are in BAR/Celsius (BC), to switch to

PSI/Fahrenheit (PF) use the up/down arrow

(Figure 3)

6. Press ENTER to select (unit will beep to confirm)

7. Press ESC to return to the Setting screen

8. To set up the number of axles, select “Set Axle”

(Figure 4)

9. Press ENTER

10. Use up down arrow keys to select number of axles

11. Press ENTER once (note: Screen doesn’t change)

12. Press ESC twice to return to Main Menu

*Note: If programming TempTrac, please refer to the

TempTrac Setup Guide.

Figure 4

Figure 3

Setting

Set Unit

Set Axle

Current Unit: PF

Want to Set: BC

PROGRAMMING GUIDE – EXTREME DUTY TPMS

System Setup

The system setup requires the following steps:

1. Read CANbus ID

2. Read Sensor ID/Set positions

3. Format Valor CANbus memory

4. Program Valor CANbus transceiver

5. Confirm programming

Turn to next page to begin Step 1.

Pro V2.2

Truck

Figure 5

PROGRAMMING GUIDE – EXTREME DUTY TPMS

STEP 1

STEP 1 - Read CANbus ID

1. In Main menu scroll to “ID Learning” (item 3/7).

(Figure 6)

2. Press ENTER

STEP 1.1

1. In the “ID Learning” menu, select “Read ID.” (Figure 7)

2. Press ENTER

Figure 6

Sensor 3/7

Vehicle ID

ID Learning

Check ID

Figure 7

ID Learning

Read ID

Transmit

Clear ID

PROGRAMMING GUIDE – EXTREME DUTY TPMS

STEP 1

STEP 1.2

1. Position the SmarTool directly over the Valor CANbus

transceiver.

2. With the cursor arrow positioned next to “Vehicle

ID:” (Figure 8) turn the power to the Valor CANbus

transceiver OFF and back ON. (I.e. vehicle ignition or

power interrupt button on Valor harness (Figure 8A).

3. DO NOT PRESS THE ENTER BUTTON on the

SmarTool.

4. The Vehicle ID number will populate automatically.

(Figure 8B)

Figure 8

Vehic ID:______

1-A: ________

1-B: ________

1-C: ________

Figure 8B

Vehic ID: 0014BC

1-A: ________

1-B: ________

1-C: ________

Figure 8A

PROGRAMMING GUIDE – EXTREME DUTY TPMS

STEP 2

STEP 2 - Read Sensor ID/Set Positions

1. Using the up/down arrow buttons, select the tire

position you want to program. Once the arrow

is in the selected position (Figure 9), go to the

corresponding tire on the vehicle.

Example: If programming 1–A to the left front tire,

position the SmarTool approx. 1 inch from the side

of the tire you wish to scan (sensors are normally

installed near the valve stem).

2. Press ENTER

3. A series of zeros will scroll across the SmarTool

indicating a search for sensor. When it locates the

sensor, the SmarTool will beep once. (Figure 10)

Figure 9

Vehic ID: 0014BC

1-A: ________

1-B: ________

1-C: ________

Figure 10

OOOOOOOOOO

PROGRAMMING GUIDE – EXTREME DUTY TPMS

STEP 2

STEP 2.1

1. Once it locates the sensor, the SmarTool will display

the ID number in the tire position field selected by the

operator.

2. If performing a complete tire installation, be sure to

repeat this step for each tire before moving to the next

step.

3. Once all Sensor ID numbers (tires) have been

scanned/ loaded, press ESC on the SmarTool and

return to the “ID Learning” menu. Return to the

vehicle’s cab.

4. *Note: When programming a Valor CANbus

transceiver for an axle with only two wheel positions

(tires) program the sensor ID numbers in positions – A

for left side and B for the right side. (Figure 11)

By positioning the sensors this way the graphical

display on the Ametek gauge will appear with 2 wheel

positions on the axle, not 4. For axles with 4 wheel

position (tires), program the sensor ID numbers as

normal: outside left A, inside left B, inside right C,

outside right D.

Figure 11

Vehic ID: 0014BC

1-A: 01015669

1-B: 01015559

1-C: ________

Andere Handbücher für EXTREME DUTY TPMS

Inhaltsverzeichnis

Andere Valor Transceiver Handbücher

Valor

Valor tpms Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung