Vanco 280708 Montageanleitung
HDMI® 4K2K
Splitters
Vanco Part Number:
280708 (1x8)
280704 (1x4)
280702 (1x2)
Technical Support
www.vanco1.com • [email protected] • 800-626-6445
www.vanco1.com 800-626-6445
2
1. Do not expose this unit to water, moisture,
or excessive humidity.
2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.
3. To prevent risk of electrical shock or re
hazard, due to overheating, do not obstruct
unit’s ventilation openings.
4. Do not install near any source of heat,
including other units that may produce heat.
5. Do not place unit near ames.
6. Only clean unit with a dry cloth.
7. Unplug unit during lightening storms, or
when not used for an extended period
of time. A surge protector is strongly
recommended.
8. Protect the power cord from being walked
on or pinched, particularly at the plugs.
9. Use unit only with accessories specied by
the manufacturer.
10. Refer all servicing to qualied personnel.
CAUTION
HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.
WARNING
DEAR CUSTOMER
Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before
connecting, operating or adjusting this product.
Please keep this manual for future reference.
This product is 100% inspected and tested in the United States
to verify HDMI performance parameters.
www.vanco1.com 800-626-6445 3
FEATURES
The Vanco 280702, 280704, and 280708 HDMI Splitters allows for duplication of a single
source to multiple displays, with the ability of controlling the source connected from each display
remotely via IR. Have multiple displays split from a single source, exibility by creating additional
HDMI displays. The Vanco splitters are capable of up to 4K2K (2160p) Ultra High Denition
resolution with simple plug and play installation, simply connect a source and the displays via
HDMI. Fully cascadable so that multiple units can be combined to add additional display outputs
to create an expanded distribution system. Also features EDID management, which allows and
encourages source and display “handshake” for seamless integration. The result is a great
solution for HDMI signal splitting, the Vanco HDMI splitters are a great choice for any application.
HDMI® 1x8 4K2K Splitter
Part # 280708
• Allows 1 HDMI source to be displayed on up to
8 HDMI displays
• Features EDID management which supports
default HDMI EDID options or has the ability to
copy the EDID of any display connected to the
source for any “handshake” issues
• Supports 4K2K (2160p @30) Ultra High
Denition resolution
• Full high denition resolution support: 2160p,
1080p, 1080i, 720p and other standard video
formats
• Fully cascadable so multiple units may be
combined to create an expanded distribution
system
• Supports HDMI 36bit Deep Color and 3D
• Supports standard audio, DSD audio and HD
(HBR) audio, 7.1 and 5.1 surround audio, Dolby
digital ,Dolby True HD, DTS, and DTS Master
audio
• Features dual band Super IR system for
controlling source from any display connected
(HDMI IR adapters (Part # 280703) and IR
transmitters and receivers are sold separately
(Part #s 280720, 280721))
• HDCP Compliant
• Compact design for easy installation
• Power Supply: DC 9V
• Dimensions: 12.5” (317mm) W x 1” (28mm) H
x 6” (156mm) D
www.vanco1.com 800-626-6445
4
HDMI® 1x4 4K2K Splitter
Part # 280704
• Allows 1 HDMI source to be displayed on up to
4 HDMI displays
• Features EDID management which supports
default HDMI EDID options or has the ability to
copy the EDID of any display connected to the
source for any “handshake” issues
• Supports 4K2K (2160p @30) Ultra High
Denition resolution
• Full high denition resolution support: 2160p,
1080p, 1080i, 720p and other standard video
formats
• Fully cascadable so multiple units may be
combined to create an expanded distribution
system
• Supports HDMI 36bit Deep Color and 3D
• Supports standard audio, DSD audio and HD
(HBR) audio, 7.1 and 5.1 surround audio, Dolby
digital ,Dolby True HD, DTS, and DTS Master
audio
• Features dual band Super IR system for
controlling source from any display connected
(HDMI IR adapters (Part # 280703) and IR
transmitters and receivers are sold separately
(Part #s 280720, 280721))
• HDCP Compliant
• Compact design for easy installation
• Power Supply: DC 5V
• Dimensions: 4.4” (111mm) W x .9” (23.5mm)
H x 3” (75mm) D
www.vanco1.com 800-626-6445 5
HDMI® 1x2 4K2K Splitter
Part # 280702
• Allows 1 HDMI source to be displayed on up to
2 HDMI displays
• Features EDID management which supports
default HDMI EDID options or has the ability to
copy the EDID of any display connected to the
source for any “handshake” issues
• Supports 4K2K (2160p @30) Ultra High
Denition resolution
• Full high denition resolution support: 2160p,
1080p, 1080i, 720p and other standard video
formats
• Fully cascadable so multiple units may be
combined to create an expanded distribution
system
• Supports HDMI 36bit Deep Color and 3D
• Supports standard audio, DSD audio and HD
(HBR) audio, 7.1 and 5.1 surround audio, Dolby
digital ,Dolby True HD, DTS, and DTS Master
audio
• Features dual band Super IR system for
controlling source from any display connected
(HDMI IR adapters (Part # 280703) and IR
transmitters and receivers are sold separately
(Part #s 280720, 280721))
• HDCP Compliant
• Compact design for easy installation
• Power Supply: DC 5V
• Dimensions: 4.4” (111mm) W x .9” (23.5mm)
H x 3” (75mm) D
www.vanco1.com 800-626-6445
6
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:
• (1) Splitter - 280702, 280704, or 280708
• (1) Power Supply - DC 5V 2A for 280702 and 280704, 9V 2A for 280708
• (1) User Manual
SPECIFICATIONS
HDCP Compliance...................................................... Yes
Video Bandwidth ........................................................ Single-link 340 Mhz [10.2 Gbps]
Video Support ........................................................... 480i/480p/720p/1080i/1080p @60 36-bit/ 2160p
@30 24-bit Deep Color
Audio Support ........................................................... Supports standard audio, DSD audio and HD (HBR)
audio, 7.1 and 5.1 surround audio, Dolby digital, Dolby True HD, DTS, and DTS Master audio
ESD Protection .......................................................... ± 8kV (air-gap discharge) & ± 4kV (contact
discharge)
Input ........................................................................ 1x HDMI / 1x IR socket for IR transmitter
Output...................................................................... 2/4/8x HDMI / 2/4/8x IR socket for IR receivers
HDMI connector ........................................................ Type A 19 pin female
3.5mm connector ...................................................... [System IR] Receives IR commands from remote
control
MECHANICAL SPECS
Housing .................................................................... Metal enclosure
Power Supply ............................................................ DC 5V 2A for 280702 and 280704, 9V 2A for
280708; 100~240V
Operation temperature............................................... 32~104 °F
Storage temperature.................................................. -4 ~140 °F
Relative Humidity....................................................... 5-90% RH (no condensation)
www.vanco1.com 800-626-6445 7
280708 PANEL DESCRIPTIONS
1. Power On/Off Switch
2. HDMI Output: LED Indicator Lights, Outputs 1-8
3. EDID DIP Switch: See EDID section for information on how to set EDID.
4. Micro USB for Firmware Updates
5. IR 3.5 jack - to connect Super IR Transmitter for IR Control (part # 280720, sold separately)
6. HDMI Input: LED Indicator Light
7. Reset Button
8. HDMI Outputs 1-8
9. HDMI Input
10. Power Port for plugging in Power Supply
1
23457
6
88
910
280704 PANEL DESCRIPTIONS
1. EDID DIP Switch: See EDID section for information on how to set EDID.
2. Micro USB for Firmware Updates
3. IR 3.5 jack - to connect Super IR Transmitter for IR Control (part # 280720, sold separately)
4. HDMI Input: LED Indicator Light
5. HDMI Output: LED Indicator Lights, Outputs 1-4
6. Reset Button
7. HDMI Outputs 1-4
8. Power Port for plugging in Power Supply
9. Note: HDMI Input: Located on side panel
1 2 347
8
56
9
www.vanco1.com 800-626-6445
8
280702 PANEL DESCRIPTIONS
1. EDID DIP Switch: See EDID section for information on how to set EDID.
2. IR 3.5 jack - to connect Super IR Transmitter for IR Control (part # 280720, sold separately)
3. Micro USB for Firmware Updates
4. HDMI Output: LED Indicator Lights, Outputs 1-2
5. HDMI Input: LED Indicator Light
6. Power LED Status Indicator Light
7. Reset Button
8. HDMI Input
9. HDMI Outputs 1-2
10. Power Port for plugging in Power Supply
12 3 4 78
5 6 9
10
EDID
The EDID switch allows for EDID learning or to pre-set an EDID to encourage a “handshake” between the
display and source.
The EDID learning function is only necessary whenever any display on the HDMI output port is not outputting
audio and/or video properly. Because the HDMI source devices and displays may have various level of capability
in playing audio and video, the general principle is that the source device will output the lowest standards in
audio format and video resolutions to be acceptable among all HDMI displays connected. In this case, a 720p
stereo HDMI signal output would be probably the safest choice. The EDID function can also force the splitter
to learn the EDID of the lowest capable HDMI display among others to make sure all displays are capable to
play the HDMI signals normally.
See dip switch positions on page 9 to adjust EDID, this can be adjusted while the unit is turned off or while
turned on.
Note: The default factory setting is EDID mode 1, in this default setting; the splitter will detect the rst HDMI
output source’s EDID setting and record it internally. If there is no display connected on output 1, the splitter
will switch to EDID mode 4 for 280702, EDID mode 6 for 280704, or EDID mode 10 for 280708, when a
display is connected, the splitter will then copy the display’s EDID and copy, then send straight to the selected
source.
DIP switch set to 0 = OFF
DIP switch set to 1 = ON
Each of the EDID settings listed in the tables on page 9 can be set while the splitter is turned ON or OFF,
select the EDID setting based on the displays and source equipment that is connected to the splitter. Often
times, going through each EDID is recommended until each display is functioning with the desired picture and
audio quality.
www.vanco1.com 800-626-6445 9
Mode Dip Switch EDID Info
Mode 1 0000 Copy EDID of HDMI Output 1
Mode 2 0001 Copy EDID of HDMI Output 2
Mode 3 0010 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 2D video, 7.1ch audio
Mode 4 0011 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 2D video, 2.0ch audio
Mode 5 0100 Fixed EDID: FULL HD (1080p/60hz) 36 bit, 2D video, 7.1ch audio
Mode 6 0101 Fixed EDID: FULL HD (1080p/60hz) 36 bit, 2D video, 2.0ch audio
Mode 7 0110 (1080p/30hz) (1080i/60hz) (720p/60hz) 24bit, 2D video, 7.1ch audio
Mode 8 0111 (1080p/30hz) (1080i/60hz) (720p/60hz) 24bit, 2D video, 2.0ch audio
Mode 9 1000 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 3D video, 2.0ch audio
Mode Dip Switch EDID Info
Mode 1 0000 Copy EDID of HDMI Output 1
Mode 2 0001 Copy EDID of HDMI Output 2
Mode 3 0010 Copy EDID of HDMI Output 3
Mode 4 0011 Copy EDID of HDMI Output 4
Mode 5 0100 Copy EDID of HDMI Output 5
Mode 6 0101 Copy EDID of HDMI Output 6
Mode 7 0110 Copy EDID of HDMI Output 7
Mode 8 0111 Copy EDID of HDMI Output 8
Mode 9 1000 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 2D video, 7.1ch audio
Mode 10 1001 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 2D video, 2.0ch audio
Mode 11 1010 Fixed EDID: FULL HD (1080p/60hz) 36 bit, 2D video, 7.1ch audio
Mode 12 1011 Fixed EDID: FULL HD (1080p/60hz) 36 bit, 2D video, 2.0ch audio
Mode 13 1100 (1080p/30hz) (1080i/60hz) (720p/60hz) 24bit, 2D video, 7.1ch audio
Mode 14 1101 (1080p/30hz) (1080i/60hz) (720p/60hz) 24bit, 2D video, 2.0ch audio
Mode 15 1110 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 3D video, 2.0ch audio
280702
Mode Dip Switch EDID Info
Mode 1 0000 Copy EDID of HDMI Output 1
Mode 2 0001 Copy EDID of HDMI Output 2
Mode 3 0010 Copy EDID of HDMI Output 3
Mode 4 0011 Copy EDID of HDMI Output 4
Mode 5 0100 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 2D video, 7.1ch audio
Mode 6 0101 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 2D video, 2.0ch audio
Mode 7 0110 Fixed EDID: FULL HD (1080p/60hz) 36 bit, 2D video, 7.1ch audio
Mode 8 0111 Fixed EDID: FULL HD (1080p/60hz) 36 bit, 2D video, 2.0ch audio
Mode 9 1000 (1080p/30hz) (1080i/60hz) (720p/60hz) 24bit, 2D video, 7.1ch audio
Mode 10 1001 (1080p/30hz) (1080i/60hz) (720p/60hz) 24bit, 2D video, 2.0ch audio
Mode 11 1010 Fixed EDID: FULL HD (1080p/60hz) 24 bit, 3D video, 2.0ch audio
280704
280708
www.vanco1.com 800-626-6445
10
Single Input Source
Front
Back
IR Transmitter
HDTV HDTV HDTV
HDMI
IR Receiver
HDTV HDTV
IR Adapter allows for
IR Control over any
existing HDMI Cable
HDTV HDTVHDTV
Forward and
Backward Compatible
IR Channel Control
280708 CONNECTION DIAGRAM
Single Input Source
HDTV HDTV HDTV
HDMI
Front
Back
IR Transmitter
IR Receiver
IR Adapter allows for
IR Control over any
existing HDMI Cable
HDTV
Forward and
Backward Compatible
IR Channel Control
280704 CONNECTION DIAGRAM
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Vanco Medienkonverter Handbücher
Vanco
Vanco RS232-IP Bedienungsanleitung
Vanco
Vanco 280563 Bedienungsanleitung
Vanco
Vanco EVSP14VW Bedienungsanleitung
Vanco
Vanco EVOLUTION EVSP8K22 Bedienungsanleitung
Vanco
Vanco HDSP4K12 Montageanleitung
Vanco
Vanco HDVC1 Bedienungsanleitung
Vanco
Vanco 12x3 Multi-Function Switch/Scaler Montageanleitung
Vanco
Vanco Evolution EV4K1014 Bedienungsanleitung
Vanco
Vanco HD4KSC Bedienungsanleitung
