Vaporesso FORZ TX80 Bedienungsanleitung

User Manual

VAPORESSO FORZ TX80

SPECIFICATIONS

Thank you for choosing Vaporesso product. Please read this

instruction carefully before use to ensure aperfect experience.

If there is any additional requirement about this product, please

consult the local agent or contact us through our website:

www.vaporesso.com

Dimensions: 133.1*41.7*30.1mm

Coils: GTR 0.15Ω MESHCoil (60-80W)

GTR 0.4Ω MESHCoil (40-60W)

Tank Capacity: Standard: 4.5ml / TPD: 2.0ml

Output Power: 5-80W

1x 18650(not included)

Display: 0.69" OLED Screen

Charging Current: DC 5V/2A, Type-C

Tank Connection: 510 Thread

PACKING LIST

Figure 1 Replace the Coil

Figure 2 Fill E-liquid

1x FORZ TX80 MOD

1x FORZ TANK 25

(Standard: 4.5ml/TPD:2ml)

1x GTR 0.15Ω MESHCoil

(Pre-installed)

1x GTR 0.4Ω MESHCoil (In Box)

1x Type-C USBCable

1x Drip Tip Cover

1x Glass Tube

4x O-ring

1x Screwdriver

1x USB SiliconePlug

1x FORZ Badge

1x User Manual

1x Warranty Card

OPEN

PULLOUT PLUG IN CLOSE

1English

ENGLISH

EXPLODED VIEW

Drip Tip

FORZ Tank 25

Glass Tube

Rubber Case

Air-inlet Ring

Power Button

0.69“ OLED Screen

“+” Button

Type-C USB Port

“-” Button

Mode/Conrm

Battery Cap

USE INSTRUCTIONS

1. Install the Tank

Install the tank to the battery by screwing the 510 thread. Make

sure they are rmly connected.

2. Replace the Coil (Please check the Figure 1 on page 1)

- Unscrew the thread base from the tank;

- Pull out the used coil in the tank;

- Install a new coil to the tank;

- Reattach the thread base into place.

3. Fill the E-liquid (Please check the Figure 2 on page 1)

- Unscrew the top cap from the tank;

- Fill e-liquid through the two lling slots;

- Reattach the top cap back into place;

- Please wait 5 minutes for the e-liquid to soak into the coil

completely.

English

the bottom of the tank.

5. Start Vaping

Press and hold the power button to start vaping. For your

safety, please do not vape for more than 10s at a time.

6. About Charging

After the Type-C USB cable is connected to the battery, the

screen indicator and remaining charging time will be displayed

on the screen.

Press the power button 3 times continuously to lock or unlock

the “+” button, “-” button and mode button. The power button

still works.

8. Choose a Mode

Press the mode button 3 times continuously or long press the

mode button to start mode setting.

*F(t): F(t) MODE (DEFAULT)

After the atomizer is installed, the device will enter the F(t)

MODE automatically.

By adjusting temperature, heating speed and time, F(t) mode

releases the ﬂavors of e-liquid adequately, delivering the

puff throughout.

*PUL: PULSE MODE

It’s a mode to improve vaping experience through constant

satisfaction, and perfect temperature cloud continuously.

*ECO: POWER ECO MODE

When the battery level is below 40% and unable to support the

preset power, the device will automatically provide an option

to enter the POWER ECO mode for increasing endurance.

*STC: SMART TEMPERATURE

CONTROL MODE

When the temperature heating wire (SS/Ti/Ni) is detected, the

device will provide an option to enter the STC (Smart TC) mode

automatically.

3English

*DIY: DIY MODE

You can choose traditional VW (H, N, S), VV, VT, BP (bypass)

and SP (super player) modes in this section. When the coil

resistance is extremely low, the device will provide an option

to enter the SP (Super Player) mode automatically.

*SET: SYSTEM SETTING

System setting includes brightness, ip screen, smart VW on/

off, Auto Eco on/off, default and version settings, the operating

interface can be customized by yourself.

Smart VW: when this function is turned on and an atomizer is

installed, the system will recommend the best power for user.

Auto Eco: When the battery level is below 40% and unable to

support the preset power, the device will automatically enter

the POWER ECO mode for increasing endurance.

9. DIY MODE

*VWS/VWN /VWH

(Variable Waage Mode)

VWH: high start-up speed

VWN: normal start-up speed

VWS: soft start-up speed

*VT-SS/VT-NI/VT-TI/VT-MI

(Variable Temperature Control Mode)

The SS, NI and TI modes are only available for the Stainless

Steel SUS316L, Nickel 200 and Titanium materials respectively.

Choose the MI mode to make a customized setting when other

heating wire materials are installed.

*VV (Variable Voltage Mode)

Customize the voltage according to your needs.

*BP (Bypass Mode)

A direct voltage output mode depends on the battery level; the

effective coil resistance range is from 0.15Ω to 5Ω.

*SP (Super Player Mode)

In DIY mode, when the coil resistance of the loaded coil is

between 0.03-0.05Ω, the system will prompt to enter the super

player mode, which is suitable for the RDA/RBA coil with ultra-

low resistance.

English

1) Short-circuit Protection: When a short circuit is detected,

the device will stop working and show “SHORT ATOMIZER” on

the screen.

2) Resistance Protection: When a low resistance is detected,

the device will stop working and show “LOW ATOMIZER” on

the screen. When a high resistance is detected, the device will

stop working and show “HIGH ATOMIZER” on the screen.

3) No Load Protection: When the device cannot detect

the coils, the device will stop working and show “CHECK

ATOMIZER” on the screen.

4) Low Voltage Protection: When the battery working voltage

is extremely low, the device cannot be operated and “LOW

BATTERY” will be showed on the screen.

5) Over Voltage Protection: The main MCU keeps monitoring

the output voltage to ensure it does not exceed the rated

voltage. If it does, the device will stop working.

6) Over charge Protection: When the battery is fully charged,

the device will stop charging and show “100%” on the screen.

7) Over discharge Protection: When the voltage drops to a low

value, the device will stop working.

8) Overtime Protection: The device will stop working if you

vape for more than 10 seconds at a time, and “TIME OVER” will

show on the screen.

9) USB High Voltage Input Protection: When the USB port

detects an input voltage exceeding the rated voltage, the

device will stop charging.

PROTECTIONS

CAUTIONS

1. Please turn off the device when it is not in use.

2. Do not leave the charging device unattended.

3. Do not drop, throw or abuse your device, which may cause

damage.

4. Please use a standard USB output charger with proper

charging current and voltage range.

5. Keep away from the water or any ammable gas, liquid.

6. Do not expose the device to direct sunlight, dust, moisture

or mechanical shock.

7. Do not expose the device to extreme temperature.

(Recommended temperature range: -10~60℃ /14~140 ℉while

using and -10~45℃ /14~113 ℉ while storing).

8. EEE Recycling: The product should not be treated as

household waste, instead, it should be handed over to the

applicable collection point for the recycling of electrical and

5English

electronic equipment.

9. Battery Recycling: The product battery should not be treated

as household waste, instead, it should be handed over to the

applicable used battery collection point for recycling.

10. Only have your device repaired by Vaporesso. Do not

attempt to repair it by yourself as damage or personal injury

may occur.

WARNINGS

This rellable electronic cigaree is intended for use with

compatible e-liquid, which may contain nicotine. Nicotine is an

addictive substance and it is not suitable or recommended to

use in following cases:

1. This device is not suitable for:

- Persons under the legal smoking age.

- Persons experiencing heart disease, stomach or duodenal

ulcers, liver or kidney problems, long-term throat disease or

difcult breathing due to bronchitis, emphysema or asthma.

- Persons with an overactive thyroid gland or experiencing

phaeochromocytoma (a tumour of the adrenal gland that can

affect blood pressure).

- Persons taking certain medications like Theophylline,

Ropinirole or Clozapine and etc..

2. This device is not recommended for:

- Non-smokers

- Pregnant or breastfeeding women

3. You may experience the following results if you use nicotine

containing e-liquid with this product. If it happens, please

consult a healthcare professional and show them this leaet if

possible:

- Feeling faint - Nausea - Dizziness - Headache

- Coughing - Irritation of the mouth or throat

- Stomach discomfort - Hiccups

- Nasal congestion - Vomition

- Chest palpitations/pain or an irregular heart rate

This device should not be used by

persons under the legal smoking

age.

1Français

FRANÇAIS

VUE ÉCLATÉE

Drip Tip

FORZ Tank 25

Tube de verre

Étui en

caoutchouc

Anneau d’entrée

d’air

Bouton

d’alimentation

Écran OLED de

0,69 pouce

Bouton « + »

Port USB de

type C

Bouton « - »

Mode/Conrmer

Couvercle de

batterie

CONSIGNES D’UTILISATION

1. Installation du réservoir

Installez le réservoir sur la batterie en les vissant ensemble

grâce au letage 510. Vériez qu’ils sont fermement connectés.

2. Remplacement de la Coil (veuillez vous référer à la Figure 1

sur la page 1)

- Dévissez la base letée du réservoir ;

- Retirez la coil usagée du réservoir ;

- Installez une nouvelle coil dans le réservoir ;

- Remettez la base letée en place.

3. Recharge de l’E.-liquide (veuillez vous référer à la Figure 2

sur la page 1)

- Dévissez le capuchon supérieur du réservoir ;

- Versez l’E.-liquide à travers les deux fentes de remplissage ;

- Remettez le capuchon supérieur en place ;

- Veuillez patienter 5 minutes, le temps que l’E.-liquide imbibe

complètement la coil.

2Français

4. Réglage du débit d’air

Tournez l’anneau d’entrée d’air installé au bas du réservoir

pour ajuster le débit de l’air.

5. Commencer à vapoter

Appuyez sur le bouton d’alimentation et maintenez-le enfoncé

pour commencer à vapoter. Pour des raisons de sécurité, nous

vous prions de ne pas vapoter sans interruption pendant plus

de 10 secondes d'aflée.

6. À propos de la charge

Dès que le câble Type USB de type C est connecté à la

batterie, l’indicateur de niveau de charge et le temps de charge

restant sont afchés sur l’écran.

7. Verrouillage/déverrouillage des boutons

Appuyez sur le bouton d'alimentation à 3 reprises successives

pour verrouiller ou déverrouiller le bouton « + », le bouton « -

» et le bouton de sélection du mode. Le fonctionnement du

bouton d’alimentation n’est pas affecté.

8. Choisir un mode

Appuyez à 3 reprises successives sur le bouton de sélection

de mode ou faites un appui long sur ce dernier pour afcher

l’interface de réglage de mode.

*F(t) : F(t) MODE (PAR DÉFAUT)

Dès l’installation de l’atomiseur, l’appareil entre

automatiquement en MODE F(t).

En réglant la température, ainsi que la vitesse et la durée

de chauffage, le mode F(t) libère des arômes d’E.-liquide en

quantité adéquate, offrant une expérience de dégustation

équilibrée et parfaite à chaque bouffée.

*PUL: PULSE MODE

Dès l’installation de l’atomiseur, l’appareil entre

automatiquement en PULSE MODE.

PULSE MODE : Il s’agit d’un mode spécialement conçu pour

améliorer l’expérience de vapotage grâce à une émission de

tension continue, ce qui permet une production optimale

des arômes, l’émission de la quantité adéquate de nicotine

et l’obtention de la température de nuage parfaite de façon

continue.

*ECO: POWER ECO MODE

Lorsque le niveau de charge de la batterie est inférieur à 40 %

et que le mode de puissance préréglé ne peut plus être pris en

charge, l’appareil propose automatiquement d’activer le mode

POWER ECO pour optimiser les performances.

*STC: SMART TEMPERATURE

CONTROL MODE

Lorsque l’appareil détecte le lament de chauffage (SS/Ti/Ni),

il propose alors d’activer automatiquement le mode STC (Smart

TC).

Andere Handbücher für FORZ TX80

Inhaltsverzeichnis

Sprachen:

Andere Vaporesso Verdampfer Handbücher

Vaporesso

Vaporesso COSS Bedienungsanleitung

Vaporesso

Vaporesso VECO ONE Bedienungsanleitung

Vaporesso

Vaporesso OSMALL 2 Bedienungsanleitung

Vaporesso

Vaporesso XIRON Bedienungsanleitung

Vaporesso

Vaporesso Target Pro Bedienungsanleitung

Vaporesso

Vaporesso VECO SOLO PLUS Bedienungsanleitung

Vaporesso

Vaporesso XROS2 Bedienungsanleitung

Vaporesso

Vaporesso LUXE II Bedienungsanleitung

Vaporesso

Vaporesso Drizzle Tank Bedienungsanleitung

Vaporesso

Vaporesso Revenger Mini Kit Bedienungsanleitung

Vaporesso

Vaporesso GTX GO 80 Bedienungsanleitung

Vaporesso

Vaporesso XROS MINI Bedienungsanleitung

Vaporesso

Vaporesso XROS 3 MINI Bedienungsanleitung

Vaporesso

Vaporesso GEN S Bedienungsanleitung

Vaporesso

Vaporesso XROS 2 Bedienungsanleitung

Vaporesso

Vaporesso TARGET PM80 Bedienungsanleitung

Vaporesso

Vaporesso Swag II Bedienungsanleitung

Vaporesso

Vaporesso GTX GO 80 Bedienungsanleitung

Vaporesso

Vaporesso GTX GO 40 Bedienungsanleitung

Vaporesso

Vaporesso GEN NANO Bedienungsanleitung

Vaporesso

Vaporesso ZERO S Bedienungsanleitung

Vaporesso

Vaporesso SWAG PX80 Bedienungsanleitung

Vaporesso

Vaporesso LUXE PM40 Bedienungsanleitung

Vaporesso

Vaporesso GEN 200 Bedienungsanleitung

Beliebte Verdampfer Handbücher anderer Marken

Vivant

Vivant Dabox Pro Bedienungsanleitung

Pulsar

Pulsar Triad Bedienungsanleitung

Smok

Smok MAG Bedienungsanleitung

Puzhen

Puzhen Bamboo Bedienungsanleitung

XVAPE

XVAPE FOG PRO Bedienungsanleitung

DaVinci

DaVinci MIQRO Bedienungsanleitung

iQOS

iQOS lil SOLID 2.0 Bedienungsanleitung

CHART

CHART VaporMan 125 Bedienungsanleitung

InnoCigs

InnoCigs EGRIP 2 LIGHT Bedienungsanleitung

OOZE

OOZE Movez Bedienungsanleitung

STORZ & BICKEL

STORZ & BICKEL Volcano Hybrid Gebrauchsanweisung

STEAMAX

STEAMAX STICK X8 Bedienungsanleitung

Storz & Bickel GMBH

Storz & Bickel GMBH Crafty Bedienungsanleitung

Joyfect

Joyfect Freaky One Bedienungsanleitung

SIGELEI

SIGELEI 213 FOG Bedienungsanleitung

Eleaf

Eleaf Lemo 2 Bedienungsanleitung

Vapor Brothers

Vapor Brothers VB Eleven Pen Bedienungsanleitung

STORZ & BICKEL

STORZ & BICKEL VOLCANO CLASSIC Bedienungsanleitung