Velleman Whadda WPM456 Bedienungsanleitung

MANUAL

whadda.com

EN DIGITAL LED STRIP DRIVER MODULE

WPM456

Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the

environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a

specialized company for recycling. This device should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Whadda! Please read the manual thoroughly before bringing this device into service. If the

device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

Read and understand this manual and all safety signs before using this appliance.

For indoor use only.

•This device can be used by children aged from 8 years and above, and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning the use of the device in a safe way and understand

the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall

not be made by children without supervision.

General Guidelines

•Refer to the Velleman®Service and Quality Warranty on the last pages of this manual.

•All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the

device is not covered by the warranty.

•Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.

•Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer

will not accept responsibility for any ensuing defects or problems.

•Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) –

of any nature (financial, physical…) arising from the possession, use or failure of this product.

•Keep this manual for future reference.

What is Arduino®

Arduino®is an open-source prototyping platform based on easy-to-use hardware and software.

Arduino®boards are able to read inputs –light-on sensor, a finger on a button or a Twitter message –

and turn it into an output –activating of a motor, turning on an LED, publishing something online. You

can tell your board what to do by sending a set of instructions to the microcontroller on the board. To

do so, you use the Arduino programming language (based on Wiring) and the Arduino®software IDE

(based on Processing). Additional shields/modules/components are required for reading a twitter

message or publishing online. Surf to www.arduino.cc for more information

Product overview

The Whadda digital LED strip driver module is designed to make it easy to drive and switch 12 V LED strips

with 5 V devices such as Arduino® compatible boards. The module features a step-up boost converter which

is designed to convert a 5 V input voltage to 12 V to drive the LED strip. The signal pin on the module can be

used to switch the converter on or off when applying a HIGH or LOW input signal respectively.

Note that the module is not designed to work with PWM signals, the input signal must be either a steady 5 V

or GND.

Specifications:

Supply voltage: 5 V DC

Output voltage: 12 V DC

Output connector: 2-pin JST XH

Maximum input current: 1 A

Maximum output current: 200 mA

Weight: g

Dimensions (W x L x H): 37 x 22 x 10,2 mm

Wiring description

Name

Arduino®connection

Signal pin

Digital Pin (e.g. D)

VCC

Supply voltage (5 V DC)

GND

Ground

GND

Example program

You can download the example Arduino® program by going to the official Whadda github page:

github.com/WhaddaMakers/Digital-LED-strip-driver-module

1. Click the “Download ZIP” link in the “Code” menu:

2. Unzip the downloaded file, and browse to the example_code folder. Open the example

Arduino® sketch (example_code.ino) located in the folder.

3. Connect your Arduino compatible board, make sure the correct Board and connection port

are set in the tools menu, and hit Upload

whadda.com

Modifications and typographical errors reserved - © Velleman Group nv. WPM456

Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.

Inhaltsverzeichnis

Andere Velleman Steuereinheit Handbücher

Velleman

Velleman VMA319 Bedienungsanleitung

Velleman

Velleman WPM400 Bedienungsanleitung

Velleman

Velleman E300GSM Bedienungsanleitung

Velleman

Velleman Whadda WPM357 Bedienungsanleitung

Velleman

Velleman K4400 Bedienungsanleitung

Velleman

Velleman VMA341 Bedienungsanleitung

Velleman

Velleman K8032 Bedienungsanleitung

Velleman

Velleman VMA214 Bedienungsanleitung

Velleman

Velleman DVM97CM Bedienungsanleitung

Velleman

Velleman PMTEMP2 Bedienungsanleitung

Velleman

Velleman K2664 Bedienungsanleitung

Velleman

Velleman VMA435 Bedienungsanleitung

Velleman

Velleman VM106 Bedienungsanleitung

Velleman

Velleman VM151 Bedienungsanleitung

Velleman

Velleman VMA349 Bedienungsanleitung

Velleman

Velleman ARDUINO VMA308 Bedienungsanleitung

Velleman

Velleman Whadda WPI304 Bedienungsanleitung

Velleman

Velleman K8008 Bedienungsanleitung

Velleman

Velleman VMA446 Bedienungsanleitung

Velleman

Velleman K8095 Bedienungsanleitung

Velleman

Velleman VMA301 Bedienungsanleitung

Velleman

Velleman WPM318 Bedienungsanleitung

Velleman

Velleman VMA501 Bedienungsanleitung

Velleman

Velleman VM131 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung