Velleman DVR4L3 Bedienungsanleitung

DVR4L3 - DVR4L4

DIGITAL 4-CHANNEL MULTIPLEXER QUAD H.264 RECORDER

DIGITALE 4-KANAALS MULTIPLEXER QUAD H.264 RECORDER

ENREGISTREUR NUMÉRIQUE MULTIPLEXER QUAD H.264 À 4 CANAUX

VIDEOGRABADORA DIGITAL MULTIPLEXOR QUAD H.264 4 CANALES

DIGITALER 4-KANAL-MULTIPLEXER QUAD H.264 RECORDER

DVR4L3

DVR4L4

QUICK INSTALLATION GUIDE 3

BEKNOPTE INSTALLATIEHANDLEIDING 9

GUIDE D’INSTALLATION RAPIDE 15

GUÍA RÁPIDA 21

SCHNELLEINSTIEG 27

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

FRONT VIEW – VOORZIJDE – VUE FRONTALE

VISTA FRONTAL - VORDERANSICHT

DVR4L3 + DVR4L4

REAR VIEW – ACHTERZIJDE – VUE ARRIÈRE

VISTA POSTERIOR – HINTERANSICHT

DVR4L3

DVR4L4

*HDD not included - *Harde schijf niet

meegeleverd - *Disque dur non inclus -

*Disco duro no incluido - *Festplatte nicht

mitgeliefert

A B

power supply data bus (SATA)

voeding databus (SATA)

alimentation bus de données (SATA)

alimentación bus de datos (SATA)

Stromversorgung Datenbus (SATA)

Figure 1

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

Quick installation guide

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its

lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted

municipal waste; it should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling service. Respect the local

environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into

service. If the device was damaged in transit, do not install or use it and contact your dealer. Damage

caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

NOTICE:

This document is a Quick installation guide. For more details, refer to the full user manual which

can be found on the included CD-ROM.

Package content:

•1x DVR4Lx4 channel DVR (x= 3 or 4)

•1x power adaptor 100-240VAC 50/60Hz to 19VDC 2.21A + power cable

•1x mounting bracket for HDD + screws

•1x CD-ROM containing the full user manual

2. Safety Instructions

Keep the device away from children and unauthorised users.

Risk of electroshock when opening the cover. Touching live wires can

cause life-threatening electroshocks.

Always disconnect mains power when the device is not in use or when

servicing or maintenance activities are performed. Handle the power

cord by the plug only.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only

Keep this device away form rain, moisture, splashing and dripping liquids.

Never put object filled with liquid on top.

Keep this device away from dust.

Keep this device away from extreme heat. Make sure the ventilation

openings are clear at all times. For sufficient air circulation, leave at least

1” (±2.5 cm) in front of the openings.

Protect this device from shocks and abuse. Avoid brute force when

operating the device.

•Familiarise yourself with the functions of the device before actually using it.

•All modifications of the device are forbidden for safety reasons.

•Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

•Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and

the dealer will not accept responsibility for any ensuing defects or problems.

•Do not use this product to violate privacy laws or perform other illegal activities.

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

4. Features

DVR4L3 + DVR4L4

•H.264 video compression technology

ohighly improves video quality for live viewing and recording

orecording file size is minimized for longest recording time

•multiplex: allows live display, recording, playback, and backup at the same time

•backup function: supports USB 2.0 flash drive backup

•intelligent motion trigger recording

oadvanced motion detection

oscheduled motion detection recording (with 1 adjustable parameter)

oquick search function

•multi-language OSD: English, French, Dutch, German, Italian, Portuguese, Spanish, Czech,

Hungarian and Greek

•full user manual: English, French, German, Spanish

•supports SATA HDD

•supports daylight-saving function

•supports manual / timer / motion / network recording functions

•system auto recovery after power reconnected

•hard disks in option: 500GB (HD500GB/S) or 750GB (HD750GB/S) (not included)

•network backup

•A/V support: supports 1 audio input and 1 audio output for sound recording

•supports TCP/IP, PPPoE, DHCP and DDNS network connection

DVR4L4 only

•VGA interface built-in with output resolution up to 1600 x 1200

5. Overview

Refer to the illustrations on page 2 of this manual.

Front panel

LED

indications

POWER DVR power is on

HDD reading or recording activities on the hard disk

TIMER timed recording is enabled

PLAY the DVR is in playing mode

MENU Press to enter the main menu.

ENTER Press to confirm settings

LIST

MANUAL List the information of the manual-recorded files. A separate file is

created for each manual recording.

MOTION List the information of the motion-trigger-recorded files.

SYSTEM List the information of the system-recorded files. The DVR system will

save one recorded file every one hour.

TIMER List the information of the timer-recorded files.

PLAY Press to play the recorded video.

SLOW In playback mode, press to play the recorded file slowly.

ZOOM In live or playback mode, press to enlarge the image of the selected channel.

SEQ Press to activate the call monitor function, and press again to quit.

4CH: Press to show the 4 channel display mode.

1 ~4 Press a button to select the corresponding channel.

POWER Press and holt to switch off the DVR.

NAVIGATE

Press one of the four positions on the navigate button to move the

cursor up ( ), down ( ), left ( ) or right ( ).

In play-back mode, press the buttons to play/pause ( ), stop

(), fast rewind ( ) or fast forward ( ) the play-back file.

In setting mode, press the up ( ) or down ( ) button to change

the setting in the menu.

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

AUDIO = SLOW + ZOOM

Press SLOW and ZOOM simultaneous to select live or play-back sounds

KEY LOCK

= MENU + ENTER

Press MENU and ENTER simultaneously to lock the front panel keys. Press any key

followed by the DVR password to unlock the keys.

USB port

To quickly backup or upgrade firmware/OSD, connect a compatible USB flash drive

to this USB port.

Note: prior to using the USB flash drive, make sure it is formatted in “FAT32”

format.

back panel DVR4L3 + DVR4L4

19V DC Power supply input.

VIDEO IN 4 video input channels to connect 4 external video sources e.g. cameras.

VIDEO OUT 1 video output channel to connect the DVR to the main monitor.

AUDIO IN 1 audio input to connect an external audio source e.g. from a camera with audio.

AUDIO OUT 1 audio output to connect to an audio device, e.g. a speaker.

LAN port Connect the DVR to a local network by plugging a network cable into this port.

back panel DVR4L4 only

VGA connector for video monitor

6. Hardware setup

Installing the Hard Disk Drive (HDD)

Refer to the illustrations on page 2of this manual.

•Obtain a suitable HDD (not included), type SATA (Serial Advanced Technology Attachment).

•Make sure to unplug the device from the mains before servicing and do not touch any electronic

circuitry to avoid electrostatic discharge.

•Unscrew the 6 screws (1 on either side and 4 on the back) that hold the cover in place.

•Lift the cover (back first).

•Screw the mounting brackets on the HDD (screws included).

Note: the PCB must be facing upwards when mounting the HDD into the DVR.

•Connect the SATA data cable and power supply to the HDD.

•Screw the HDD on the bottom of the DVR housing PCB facing upwards using the included screws.

•Close the cover (front first) and secure it with the 6 screws.

Connecting a video monitor

•Obtain a suitable monitor (not included) and connect it to the BNC (or VGA for DVR4L4) video

output port on the back of the DVR.

Connecting the power supply

•Plug the DC output connector of the included power adaptor into the 19VDC power input at the

back of the DVR.

WARNING: only use the included adaptor.

•Plug the included power cable into the adaptor input connector and plug the other end into the

mains. Do not switch the DVR on yet.

Connecting a camera

•Obtain up to four suitable cameras (not included). Each camera needs its own power supply.

•Connect the video output of the camera to either video input at the back of the DVR. The number

next to the input connectors represents the channel number. Connector type is BNC.

Connecting audio

•The DVR supports one audio input. Connect the audio output of an audio source to the audio input

(lower connector) of the DVR. Connector type is BNC.

•There is also an audio output connector. Connect an audio device e.g. a speaker to this connector

when desired. Connector type is BNC.

Connecting Local Area Network (LAN)

•Connect the DVR to a local network by plugging a network cable into the LAN port at the back of

the DVR. Connector type is 8P8C (RJ45). Setup is done through the OSD.

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

7. Preliminary settings

•Make sure the connected cameras are on and press the POWER button to switch on the DVR. It

takes about 10 to 15 seconds to start up.

Setting date and time

•Before using the DVR the time and date should be set to get a valid time stamp.

•Press the MENU button and enter the password to go into the menu list.

Note: default admin password is “0000” (4 times zero).

•Use the NAVIGATION button to move to the DATE menu item. Select it to set date, time and

daylight savings option.

Note: once recording started, do not change date or time as this will make it very difficult to

find back the recorded files.

Note: when using the DVR for the first time and the correct time is set, leave it on for at

least 48 hours.

Password setting

•Press the MENU button and enter the password to go into the menu list.

•Select the ADVANCED menu item.

•Go to SYSTEM (or SYSTEM INFO depending on DVR type). Select PASSWORD and press the ENTER

button to set the password. Press the cursor up ( ) or down ( ) button to select the value of

the first number and press enter to save and go to the next character. Repeat this for all four

password numbers.

Note: default admin password is “0000” (4 times zero).

Record settings

•Press the MENU button and enter the password to go into the menu list.

•Select the RECORD menu item using the NAVIGATION button.

•Set the image size, image quality and images per second for recording.

•Refer to the full user manual on the included CD-ROM for more details.

8. Operation

Display

The following image shows the screen layout.

A system date and time

B general system status

C available HDD capacity

D channel status

control panel locked/unlocked timed recording

HDD overwrite motion detected

Zoom mode / actual size recording

live audio channel enabled /

disabled

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

Note that actual screen icons might differ slightly from the ones shown above. Recording

•Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.

•When the auto-recording and pre-alarm functions are enabled, the device will start recording

images.

Note: the device will overwrite the oldest 8GB of data.

•Default the recording icon ( ) is shown.

•In case the motion detection is activated and a motion is detected, the motion icon ( ) is shown.

•When timed recording is enabled, the timed recording icon ( ) is showed and the timed recording

LED is on.

Play-back

•Make sure the control panel is not locked and press the PLAY button on the control panel.

Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the

recording must be at least 273 seconds long).

•The fast forward ( ) and fast rewind ( ) buttons will increase resp. decrease the play-back

speed. Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).

•Press the pause button ( ) to temporary suspend video play-back.

•Press the stop button ( ) to return to live monitoring.

•Press the SLOW button once to set play-back speed to 1/4th and twice for 1/8th.

•There are two ways to search recorded files: by list or by time.

Note: the recorded files can also be searched via the included Video Viewer software.

•To search by list, press the LIST button on the front panel (make sure the control panel is not

locked). An overview of the recorded file types (ALARM, MANUAL, MOTION and SYSTEM) is shown.

Select the desired list and press ENTER to start play-back.

•To search by time press the MENU button and navigate to “EVENT LOG”. Go to “QUICK SEARCH”

and press “ENTER”. Search for any event that happened at a specific time.

Firmware/OSD upgrade

•This is done using a USB flash drive (not included).

Note: the DVR can also be upgraded via the included Video Viewer software.

•Format the USB memory device to FAT32 format.

•Get the update file from the distributor and copy it to the USB device. Do not rename the file.

•Insert the USB device into the USB port and wait until it is detected.

•Go to MENU, ADVANCE CONFIG, SYSTEM INFO.

•Select UPGRADE, START and press ENTER.

•Select YES and press ENTER to confirm. Do not switch off the DVR until the upgrade is finished.

9. Technical specifications

DVR4L3 + DVR4L4

video system PAL

video compression H.264 (CIF)

video input 4 channels, composite video signal 1Vpp / 75 ohms BNC

video output DVR4L3 composite video signal 1Vpp / 75 ohms BNC

DVR4L4 composite video signal 1Vpp / 75 ohms BNC

VGA – max. 1600 x 1200 pixels

maximum recording rate (PAL) 352 × 288 pixels with 100 IPS

image quality setting best - high - normal - basic

hard disk storage built-in SATA type, support 1x HDD, support HDD capacity over

1TB (HDD not incl)

recording mode manual / timer / motion / network controlled

refresh rate 100 IPS for PAL

motion detection area DVR4L3 3 pre-defined areas selectable

DVR4L4 16 x 12 grids per channel

motion detection sensitivity 1 parameter with 4 sensitivity levels (high, normal, low, off)

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

pre-alarm recording 8MB

backup device USB 2.0 flash drive (for backup and firmware updates)

digital zoom 2x (live & playback)

key lock yes

video loss detection yes

camera title up to 6 characters

video adjustments hue / colour / contrast / brightness

date display format YY/MM/DD, DD/MM/YY, MM/DD/YY, and off

power source 19VDC

power consumption < 42W

operating temperature 10°C ~ 40°C (50°F ~ 104°F)

system recovery system auto recovery after power reconnected

dimensions 343 x 223 x 59mm

audio I/O 1x audio in, 1x audio out (mono)

web transmitting / compression

format

H.264

Ethernet 10/100 Base-T, supports network control and LiveView via

Ethernet

web interface supports licensed software AP and IE browser

network connection supports TCP/IP, PPPoE, DHCP and DDNS function

Use this device with original accessories only. Velleman nv cannot be held responsible in

the event of damage or injury resulted from (incorrect) use of this device. For more info

concerning this product, please visit our website www.velleman.eu. The information in

this manual is subject to change without prior notice.

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.

No part of this manual or may be copied, reproduced, translated or reduced to any electronic

medium or otherwise without the prior written consent of the copyright holder.

DVR4L3 - DVR4L4

30/07/2009 ©Velleman nv

Beknopte installatiehandleiding

1. Inleiding

Aan alle ingezetenen van de Europese Unie

Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus

wordt weggeworpen, dit toestel schade kan toebrengen aan het milieu. Gooi dit toestel (en

eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een

gespecialiseerd bedrijf terechtkomen voor recyclage. U moet dit toestel naar uw verdeler of

naar een lokaal recyclagepunt brengen. Respecteer de plaatselijke milieuwetgeving.

Hebt u vragen, contacteer dan de plaatselijke autoriteiten betreffende de verwijdering.

Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd

het toestel beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.

OPMERKING:

Dit document is een beknopte installatiehandleiding. Raadpleeg de volledige handleiding op de

cd-rom voor meer informatie (enkel beschikbaar in het Engels, Frans, Duits en Spaans).

Inhoud:

•1x DVR4Lx4-kanaals DVR (x= 3 of 4)

•1x voedingsadapter 100-240 VAC~50/60 Hz naar 19 VDC 2,21 A + voedingskabel

•1x montagebeugel voor harde schijf + schroeven

•1x cd-rom met volledige handleiding

2. Veiligheidsinstructies

Houd buiten het bereik van kinderen en onbevoegden.

Elektrocutiegevaar bij het openen van het toestel. Raak geen kabels

aan die onder stroom staan om dodelijke elektroshocks te vermijden.

Trek de stekker uit het stopcontact (trek niet aan de kabel!) voordat u

het toestel reinigt en als u het niet gebruikt.

3. Algemene richtlijnen

Raadpleeg de Velleman® service- en kwaliteitsgarantie achteraan de handleiding.

Enkel voor gebruik binnenshuis.

Bescherm dit toestel tegen regen, vochtigheid en opspattende

vloeistoffen. Plaats geen object gevuld met vloeistof op het toestel.

Bescherm tegen stof.

Bescherm tegen extreme hitte. Zorg dat de verluchtingsopeningen niet

verstopt geraken. Voorzie een ruimte van minstens 2,5 cm tussen het

toestel en elk ander object.

Bescherm tegen schokken. Vermijd brute kracht tijdens de bediening.

•Leer eerst de functies van het toestel kennen voor u het gaat gebruiken.

•Om veiligheidsredenen mag u geen wijzigingen aanbrengen.

•Gebruik het toestel enkel waarvoor het gemaakt is. Bij onoordeelkundig gebruik vervalt de

garantie.

•De garantie geldt niet voor schade door het negeren van bepaalde richtlijnen in deze handleiding

en uw dealer zal de verantwoordelijkheid afwijzen voor defecten of problemen die hier

rechtstreeks verband mee houden.

•Leef bij gebruik van dit toestel de wetgeving betreffende de privacy na.

DVR4L3 - DVR4L4

4. Eigenschappen

DVR4L3 + DVR4L4

•videocompressie H.264

overbeterde videokwaliteit voor monitoring en opnames

olangere opnameduur dankzij een verminderde bestandgrootte

•multiplexing: simultane liveweergave, opname, playback en back-up

•back-upfunctie: ondersteunt back-up via USB 2.0 flash drive

•opname door bewegingswaarneming

ogeavanceerde opname door bewegingswaarneming

oopname door bewegingswaarneming met geprogrammeerde starttijd (1 instelbare

parameter)

osnelzoekfunctie

•meertalige OSD: Engels, Frans, Nederlands, Duits, Italiaans, Portugees, Spaans, Tsjechisch,

Hongaars en Grieks

•uitgebreide handleiding: Engels, Frans, Duits, Spaans

•ondersteunt SATA harde schijven

•overschakeling naar zomer- of wintertijd

•opnamemodi: manueel / timer / beweging / via netwerk

•automatisch herstel van het systeem nadat de voeding opnieuw is aangesloten

•harde schijven in optie: 500 GB (HD500GB/S) of 750 GB (HD750GB/S) (niet meegeleverd)

•back-up via netwerk

•audio/video: opname met geluid langs 1 audio-ingang en 1 audio-uitgang

•ondersteunt TCP/IP, PPPoE, DHCP en DDNS netwerkaansluiting

Enkel DVR4L4

•ingebouwde VGA-interface met een uitgangsresolutie tot 1600 x 1200

5. Omschrijving

Raadpleeg de figuren op pagina 2 van deze handleiding.

Frontpaneel

Leds

POWER De DVR is ingeschakeld.

HDD De harde schijf leest of neemt data op.

TIMER De geprogrammeerde opnamefunctie is ingeschakeld.

PLAY De DVR speelt de opname af.

MENU Druk op MENU om het menu weer te geven.

ENTER Druk op ENTER om te bevestigen.

LIST

MANUAL Weergave van de informatie over de handmatig gestarte opnames. Er

wordt een afzonderlijk bestand aangemaakt voor elke opname.

MOTION Weergave van de informatie over de opnames met

bewegingswaarneming.

SYSTEM Weergave van de informatie over de geautomatiseerde opnames. De DVR

maakt elk uur een bastand aan.

TIMER Weergave van de informatie over de geprogrammeerde opnames.

PLAY Druk op PLAY om de opname af te spelen.

SLOW Druk op SLOW om het afgespeelde bestand traag af te spelen.

ZOOM Druk op ZOOM om het beeld in het geselecteerde kanaal te vergroten.

SEQ Druk op SEQ om de callmonitor in of uit te schakelen.

Druk op om de 4-kanaals display weer te geven.

1 ~ 4 Druk op een cijfertoets om het desbetreffende kanaal te selecteren.

POWER Houd POWER ingedrukt om de DVR uit te schakelen.

NAVIGATIE

Druk op een van de toetsen om de cursor te verplaatsen: omhoog

(), omlaag ( ), links ( ) of rechts ( ).

Druk tijdens het afspelen op om het bestand af te spelen/te

pauzeren, op om het bestand te stoppen, op om het bestand

terug te spoelen of op om het bestand verder te spoelen.

Druk tijdens het instellen op of om de instellingen te wijzigen.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Velleman Multiplexer Handbücher

Velleman

Velleman VQS4RT4 Bedienungsanleitung

Beliebte Multiplexer Handbücher anderer Marken

Campbell

Campbell AM416 Bedienungsanleitung

Paradyne

Paradyne SIM2000 Bedienungsanleitung

Panasonic

Panasonic WJFS616 - SWITCHER Bedienungsanleitung

Lanex

Lanex TM-77 Bedienungsanleitung

Bosch

Bosch VSS8394/01T Bedienungsanleitung

Quark-Elec

Quark-Elec QK-A035 Bedienungsanleitung

ADTRAN

ADTRAN Frameport 768 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E247 Bedienungsanleitung

Paradyne

Paradyne Hotwire 8786 Bedienungsanleitung

RFL Electronics

RFL Electronics 9508D UCC Bedienungsanleitung

Miranda

Miranda AMX-101i Bedienungsanleitung

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Bedienungsanleitung

GE StoreSafe SDVR-10 Bedienungsanleitung

Pickering

Pickering 40-613 Bedienungsanleitung

Pickering

Pickering 40-667C Bedienungsanleitung

American Fibertek

American Fibertek MTX-8410C Bedienungsanleitung

ADC

ADC HiGain ELU-319 5E Bedienungsanleitung

Paradyne

Paradyne Hotwire 8774 Bedienungsanleitung