Velleman CAMTVI13 Bedienungsanleitung

CAMTVI13

HD CCTV DOME CAMERA - OUTDOOR

HD CCTV DOMECAMERA - GEBRUIK BUITENSHUIS

CAMÉRA DÔME HD CCTV - EXTÉRIEUR

CÁMARA HD CCTV DOMO - EXTERIORES

HD CCTV-DOME-KAMERA - AUßENBEREICH

KAMERA HD CCTV - ZEWNĘTRZNA - KOPULKOWA

CÂMARA HD CCTV - TIPO DOME - EXTERIOR

HD-TVI –VARIFOCAL –IR –1080P

USER MANUAL 6

HANDLEIDING 13

MODE D'EMPLOI 20

MANUAL DEL USUARIO 27

BEDIENUNGSANLEITUNG 34

INSTRUKCJA OBSŁUGI 41

MANUAL DO UTILIZADOR 48

CAMTVI13

V. 01 –09/01/2017 2 ©Velleman nv

CAMTVI13

V. 01 –09/01/2017 3 ©Velleman nv

CAMTVI13

V. 01 –09/01/2017 4 ©Velleman nv

CAMTVI13

V. 01 –09/01/2017 5 ©Velleman nv

CAMTVI13

V. 01 –09/01/2017 6 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of

the device after its lifecycle could harm the environment. Do not

dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before

bringing this device into service. If the device was damaged in transit, do

not install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized

users.

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their

safety. Children shall be supervised to ensure that they do

not play with the appliance.

Do not disassemble or open the cover. There are no user-

serviceable parts inside the device. Refer to an authorized

dealer for service and/or spare parts.

Risk of electroshock when opening the cover. Touching

live wires can cause life-threatening electroshocks. Do not

disassemble or open the housing yourself. Have the device

repaired by qualified personnel.

CAMTVI13

V. 01 –09/01/2017 7 ©Velleman nv

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages

of this manual.

Keep this device away from dust and extreme temperatures.

Protect this device from shocks and abuse. Avoid brute force

when operating the device.

Familiarise yourself with the functions of the device before actually

using it.

All modifications of the device are forbidden for safety reasons. Damage

caused by user modifications to the device is not covered by the

warranty.

Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for

any ensuing defects or problems.

Due to constant product improvements, the actual product appearance

might differ from the shown images.

Product images are for illustrative purposes only.

Do not use this product to violate privacy laws or perform other illegal

activities.

Do not switch the device on immediately after it has been exposed to

changes in temperature. Protect the device against damage by leaving

it switched off until it has reached room temperature.

Keep this manual for future reference.

4. Features

weatherproof

with B/W night vision (IR LEDs)

1080P video signal

vandal-proof bracket

CAMTVI13

V. 01 –09/01/2017 8 ©Velleman nv

5. Installation

Refer to the illustration on page 2 of this manual.

lens

fixation ring

IR LEDs

mounting ring

light sensor

power plug

camera

video plug

6. Installation

1. Disassemble the camera. You should have three parts: the mounting

plate, the fixation ring and the camera.

2. Choose a location for the camera, keeping following guidelines in

mind:

odo not install the camera in locations where extremely high or low

temperatures or excessive vibrations may occur.

oavoid mounting the camera near high electro-magnetic fields.

odo not aim the camera at the sun or other extremely bright objects

or reflections (e.g. metal doors).

3. Use the mounting plate to determine the position of the mounting

holes. Drill the holes.

4. Fix the mounting plate on the ceiling or wall with the four screws.

Place the camera on the mounting plate and slide the fixation ring over

the camera. Tighten the locking screw slightly.

5. Connect all wires. Set up the desired field of observation by adjusting

the position of the camera in the fixation ring.

6. Tighten the locking screw to fix the fixation ring.

CAMTVI13

V. 01 –09/01/2017 9 ©Velleman nv

7. Connection

1. Connect the power terminal of the camera to a 12 VDC regulated

power supply.

2. Connect the video output of the camera to the video input of your DVR

using a 75 Ωcoaxial cable.

Only use a regulated 12 VDC power adapter. Using any

other type will damage this camera.

Protect the connectors against moisture by applying some

insulating tape over the connectors.

8. Focal Length and Focal Adjustment

1. On the DVR live view, click the camera’s channel to display it in full

screen.

2. Open the control panel by clicking the camera icon.

zoom in/out max.

zoom in/out

click to display the image at its

largest/smallest

zoom in/out max.

zoom in/out

click to zoom in/out

focus near/far

click to adjust the focal distance

IR intensity

click and drag the slider from 0 to 5;

the higher the value, the brighter

the image

CAMTVI13

V. 01 –09/01/2017 10 ©Velleman nv

9. Camera Configuration

1. On the DVR live view, right-click in the screen to display the DVR

menu.

2. Select ADVANCED CONFIG > DCCS.

ADVANCED CONFIG

CAMERA

CH1

CH2

CH3

CH4

DETECTION

OSD MENU

SETUP

ALERT

DCCS MENU

SETUP

NETWORK

DISPLAY

RECORD

F.W.

DCCS

DEVICE

AVT SERIES

NOTIFY

CONNECTION

EXIT

3. In DCCS SETUP, click the value to change from 1 to 100.

DCCS SETUP

IR1 BRIGHTNESS USER

100

4. Select ADVANCED CONFIG > DCCS > OSD MENU. Select the

camera’s channel and click SETUP to enter the camera’s menu.

ADVANCED CONFIG

CAMERA

CH1

CH2

CH3

CH4

DETECTION

OSD MENU

SETUP

ALERT

DCCS MENU

SETUP

NETWORK

DISPLAY

RECORD

F.W.

1015

DCCS

DEVICE

AVTXXX

NOTIFY

CONNECTION

EXIT

Inhaltsverzeichnis

Sprachen:

Andere Velleman Sicherheitskamera Handbücher

Velleman

Velleman Etiampro ECAMTVI101 Bedienungsanleitung

Velleman

Velleman CAMTVI14W Bedienungsanleitung

Velleman

Velleman CAMCOLD16 Bedienungsanleitung

Velleman

Velleman CAMZWIRP Bedienungsanleitung

Velleman

Velleman CAMTVI6 Bedienungsanleitung

Velleman

Velleman CAMCOLD Bedienungsanleitung

Velleman

Velleman CAMCOLVC1 Bedienungsanleitung

Velleman

Velleman CAMCOLBUL2 Bedienungsanleitung

Velleman

Velleman CAMCOLBUL19 Bedienungsanleitung

Velleman

Velleman CAMCOLMHA8 Bedienungsanleitung

Velleman

Velleman CAMCOLD26 Bedienungsanleitung

Velleman

Velleman CAMIP5N1 Bedienungsanleitung

Velleman

Velleman CAMCOLD12 Bedienungsanleitung

Velleman

Velleman CAMD13 Bedienungsanleitung

Velleman

Velleman CAMCOLD1 Bedienungsanleitung

Velleman

Velleman CAMTVI16N Bedienungsanleitung

Velleman

Velleman CAMCOLD18 Bedienungsanleitung

Velleman

Velleman CAMIP2 Bedienungsanleitung

Velleman

Velleman Camcolbul16N Bedienungsanleitung

Velleman

Velleman camcolvc21 Bedienungsanleitung

Velleman

Velleman CAMCOLD20 Bedienungsanleitung

Velleman

Velleman CAMCOLBUL23 Bedienungsanleitung

Velleman

Velleman CAMIP11 Bedienungsanleitung

Velleman

Velleman CAMSET27 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung