Vello BG-C9 Bedienungsanleitung

BG-C9

BATTERY GRIP

Designed For The Canon 5D

Mark III SLR Camera

USER’S MANUAL

Introduction

Thank you for choosing Vello and congratulations

on your new BG-C9 battery grip purchase. Enjoy

the many benefits that a battery grip offers, such as

extended shooting time and more control and comfort

when shooting in a vertical (portrait) orientation.

The Vello BG-C9 is compatible with the Canon 5D

Mark III SLR camera. The BG-C9 accepts two Canon

LP-E6 rechargeable batteries, or six AA batteries

(alkaline, Ni-MH, lithium, or nickel-manganese) can

be used instead for added convenience. The BG-C9

is equipped with an alternate shutter-release button,

AF start button, AF point selection, AE lock/FE lock

button, multi-controller button, multi function button,

and main dial for shooting in a vertical position.

Please read through this entire manual before using

the BG-C9 battery grip.

Precautions

1. The BG-C9 should only be used with compatible

devices specified in this manual.

2. Only use with batteries and battery holders

recommended in this manual.

3. Cover the power terminals with the contact cap

when the BG-C9 is not in use. This prevents

electrical shorts caused by metal objects touching

the power terminals.

4. When the battery holder is removed from the

grip, remove the batteries or place the holder in

a container to prevent electrical shorts caused by

contact with other metal objects.

5. If you notice smoke, an unusual smell or noise from

the battery pack, discontinue use immediately.

Remove the batteries and take the device to a

Vello authorized reseller.

6. Turn the grip power off when not shooting

vertically.

7. The battery level may not display properly if

batteries are inserted before mounting the grip.

8. Remove batteries from the grip when not in use.

9. Do not attempt to disassemble.

10. Avoid water or extreme humidity and keep in a

dry and cool place.

11. Keep out of reach of children.

OVERVIEW INTRODUCTION

ASSEMBLY

Overview

11 12 13

114

20 21

1516

Contact Cap

Protects grip contacts. Keep covered

when the grip is not in use.

2Electrical Contacts

Communicates with the camera

electronics.

Mounting Screw

Aligns with the camera’s tripod

socket.

4Guide Pin

Helps align the camera to the grip.

5Battery Tray Lever

Locks and unlocks the battery

compartment door.

6Battery Tray Compartment

Houses the battery tray.

7DC Coupler Cord Mount

Groove for use with the Canon AC

Power Adapter (ACK-E6).

8Attachment Wheel

Secures the grip to the camera.

9Grip Power ON/OFF

10 Multi-Controller Button*

11 AF Point Selection/Magnify Button*

AE Lock/FE Lock/Index/Reduce

Button*

AF Start Button

14 Shutter-Release Button*

15 Multi Function Button*

Main Dial*

17 Camera Battery Chamber Cover

Holder

Stores the cover when the grip is

mounted.

18 Hand Strap Mount

19 Tripod Socket

20 Battery Tray

Holds up to two Canon LP-E6

batteries.

21 AA Battery Tray

Holds up to six AA batteries.

* Performs the same function as on the

camera.

OVERVIEW INTRODUCTION

ASSEMBLY

Attaching The Grip

1. Ensure that the power is

turned off on the camera

and that the power switch

is set to OFF on the

battery grip.

2. Remove the battery

from the camera battery

compartment.

3. Open the camera

battery chamber cover

and remove as indicated

above.

4. To prevent loss, place the

camera battery chamber

cover into the BG-C9

battery chamber holder.

as indicated above. Swing

the battery chamber cover

shut so that it locks into

place

5. Remove the protective

cap and connect the BG-

C9 grip to the camera,

while aligning the grip’s

mounting screw with the

camera’s tripod socket.

6. Rotate the attachment

wheel in the direction

shown by the arrow until

it is firmly tightened.

When removing the grip,

turn the camera power off,

remove batteries, and replace

protective contact cap.

OVERVIEW INTRODUCTION

ASSEMBLY

Inserting Batteries

1. Ensure that the power is

turned off on the camera

and the grip. Use your

fingernail to protrude the

battery tray lever so you

can rotate and pull as

indicated above, and slide

the battery tray out of the

grip.

2. Canon LP-E6 Batteries:

Insert up to two batteries

by placing them into either

slot in the battery tray,

while ensuring the correct

orientation as shown on

the tray.

3. AA Batteries: Place six

new AA batteries of the

same type into the AA

battery holder as shown,

while ensuring that they are

in the correct orientation.

4. Rotate the battery tray

lever counterclockwise

and slide the battery

tray all the way into the

grip. Rotate the lever as

indicated above and push

the it back into place to

lock the tray.

5. Switch the grip power

to ON and then turn

on the camera’s power.

Check the battery level

in the control panel or

viewﬁnder.

6. Household Power Outlet:

The Canon ACK-E6

AC Power Adapter Kit

(sold separately) can be

connected to the grip.

Place the DC coupler

through the small groove

on the back of the grip.

Ensure that the cord

doesn’t get pinched by the

battery holder.

OVERVIEW INTRODUCTION

ASSEMBLY

Specifications

Power Source 1. One or two Canon LP-E6 rechargeable batteries

2. Six AA/LR6 Alkaline batteries

3. Works with the Canon AC Adapter Kit ACK-E6 (sold separately)

Operating Temperature 32 – 104 °F (0 – 40 °C)

Dimensions Approximately 6.0 × 4.5 × 3.4 in. (153.1 × 113.3 × 85.7 mm)

Weight Approximately 10.4 oz. (294.8 g) (excluding battery tray and batteries)

* Approximate measurements.

Speciﬁcations and design are subject to change without notice.

AA batteries do not provide as much shooting time as LP-E6 rechargeable batteries. Performance of AA batteries may also be dependent

on brand and storage conditions. AA batteries may not function under 68º F (20º C).

Please note: When using the AA battery tray, the battery indicator will only work with Ni-MH batteries.

This product is not compatible with Duracell®brand alkaline batteries.

Inhaltsverzeichnis

Andere Vello Kamerazubehör Handbücher

Vello

Vello EXTENDA Bedienungsanleitung

Vello

Vello IR Remote Mini Bedienungsanleitung

Vello

Vello LA-MFT-CFD Bedienungsanleitung

Vello

Vello BG-N17 Bedienungsanleitung

Vello

Vello BG-C15-2 Bedienungsanleitung

Vello

Vello tripod collar Bedienungsanleitung

Vello

Vello BG-N6 Bedienungsanleitung

Vello

Vello BG-C10 Bedienungsanleitung

Vello

Vello BG-N1 Bedienungsanleitung

Vello

Vello BG-N8 Bedienungsanleitung

Vello

Vello BG-N7-2 Bedienungsanleitung

Vello

Vello QuickDraw Bedienungsanleitung

Vello

Vello Lens Adapter Bedienungsanleitung

Vello

Vello FreeWave Viewer VL Bedienungsanleitung

Vello

Vello BG-BMP6K Bedienungsanleitung

Vello

Vello LA-CEF-CFD Bedienungsanleitung

Vello

Vello FreeWave Plus Bedienungsanleitung

Vello

Vello ACTIONPAN PRO Bedienungsanleitung

Vello

Vello EXTENDA Bedienungsanleitung

Vello

Vello BG-C9-2 Bedienungsanleitung

Vello

Vello Freewave micro Bedienungsanleitung

Vello

Vello FreeWave Flash Trigger LR Bedienungsanleitung

Vello

Vello BG-S1 Bedienungsanleitung

Vello

Vello UMBRA Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung