5
VUT mini EC
Table 2. Technical characteristics
VUT
200 H mini EC
VUT
200 V mini EC
VUT
300 H mini EC
VUT
300 V mini EC
Supply voltage, 50 Hz [V] 1~ 230 1~ 230
Max. fan power [W] 2 items х 105 2 items х 105
Fan current [A] 2 items х 0,9 2 items х 0,9
Total unit power [W] 210 210
Total unit current [A] 1,80 1,80
Max. air capacity [m3/h] 240 345
RPM [min-1] 3550 3570
Noise level 3 m, [dB(A)] 24-45 28-47
Transported air temperature [°C] from -25 up to +60 from -25 up to +60
Casing material Zinc aluminium Zinc aluminium
Insulation 20 mm mineral wool 20 mm mineral wool
Filter: extract/supply panel G4 type panel G4 type
Replaceable lter* SF VUT mini G4 SF VUT mini G4
Summer block* VL VUT mini VL VUT mini
Connected air duct diameter [mm] Ø100 Ø125
Weight [kg] 30 30
Heat recovery eciency up to 85% up to 85%
Heat exchanger type Cross ow Cross ow
Heat exchanger material aluminium aluminium
*extra replaceable lter sets and summer blocks are the specially ordered items and are available upon separate order
SAFETY REQUIREMENTS
Installation and operation of the unit shall be performed in accordance with the present user’s manual as well as the provisions of all
the applicable local and national construction, electrical and technical codes and standards.
The unit is classied as a class I electric appliance.
The unit must be grounded!
Before connecting the unit to power mains make sure that the unit is free of any visible damages or any other foreign objects inside
the casing that can damage the impeller blades.
Mounting and connection of the unit to power mains only by duly qualied electricians with valid electric work permit!
The unit is not rated for operation in an environment that contains toxic or aggressive substances as acids, alkalis, organic solvents,
soot, paint as well as sputtered particles of explosive or aggressive substances. The unit is not rated for use in areas where atmospheric
conditions are determined by sea climate or hot springs.
DISCONNECT THE UNIT FROM POWER SUPPLY PRIOR TO MOUNTING, MAINTENANCE, CONNECTION AND
REPAIR WORKS!
DO NOT!
• DO NOT OPERATE THE UNIT BEYOND THE SPECIFIED TEMPERATURE RANGE OR IN AN AGGRESSIVE AND
EXPLOSIVE MEDIUM!
• DO NOT CONNECT CLOTHES DRYERS OR SIMILAR EQUIPMENT TO THE VENTILATION SYSTEM!
• DO NOT OPERATE THE UNIT IN THE AIR AND DUST MIXTURE MEDIUM!
