Vents P2-1-300 Betriebsanleitung

TWO-SPEED

FAN SWITCH

“VENTS P2-1-300”

USE

The product is applied for speed switching of domestic double-speed fans and other similar

products equipped with multi-speed motors.

The switch is designed for mounting into a junction box.

BASIC TECHNICAL DATA

Power voltage: 230 V, 50/60 Hz.

Output voltage, no less: 600 W (current load no more 3 A)

Load type: inductive, active

Overall dimensions, no more 88х88х51 mm.

Ingress Protection Rating: IP40 (on front panel side only).

Operating medium conditions: from -10°C up to +40°C at 80% relative humidity.

The operating medium must not contain explosive and corrosion-provoking substances.

DELIVERY SET

The delivery set comprises:

speed switch - 1 pce;

user's manual;

packing box.

SAFETY REQUIREMENTS

All the connection, service and maintenance operations are allowed by qualified electricians only,

after careful reading of the user's manual.

Warning! The speed switch circuit is under mains voltage! Disconnect the product from power

mains prior to all the mounting, connection and adjustment operations!

DESIGN DESCRIPTION

The speed switch view is shown in fig. 1

Position of the speed switch knob indicates following modes:

OFF - the unit is switched off

1 - low speed

2 - high speed

INSTALLATION AND OPERATION GUIDELINES

Install the speed switch vertically on the wall in a junction box flush or surface mounted.

While operating and mounting the speed switch the following factors are not allowed:

sprayed water/liquid, raindrops;

direct sunlight exposure;

installation near heating equipment and other heat sources.

Connect the product to power mains through an automatic circuit breaker integrated into

a fixed wiring with no less than 3 mm gap on all poles.

Connect the product in compliance with the wiring diagram on fig. 2.

OFF

MOUNTING SEQUENCE ( refer fig. 3)

Remove the speed switch knob with a screwdriver.

The back side of the casing includes four latches for fixing of the switch front panel.

Remove the front panel by pressing two latches slightly.

To connect the cable to power mains:

Switch the automatic circuit breaker off to turn line voltage off.

Strip the wire ends for 5-7 mm, connect them to the screw terminals and fix the wire ends

with screws.

Route the power supply wires in the junction box and fix the speed switch with self-tapping

screws to the junction box.

Place the front panel back and press it slightly to click.

Install the speed switch knob.

Connect the switch to power mains and turn the speed switch knob counterclockwise against

stop (OFF position).

For setting the required fan speed rotate the speed switch knob clockwise.

STORAGE RULES

Store the product in the original packing in a ventilated room at the temperatures between +5°C

and +40°C and the relative humidity not more than 80% at 25°C.

MANUFACTURER'S WARRANTY

Manufacturer hereby guarantees normal operation of the product for 12 months from the date of

resale, subject to compliance with transport, storage, mounting and operation rules.

No warranty for mechanically damaged products.

In case of no confirmation of the sales date, warranty period is calculated from the production date.

In case of the product failure due to manufacturing defect during the warranty period the

consumer has the right for the product replacement. Replacements are offered by the Seller.

Contact the Seller for the product replacement.

fig. 1 fig. 2 fig. 3

ACCEPTANCE CERTIFICATE

The speed switch is recognized as serviceable

Model

VENTS P2-1-300

Manufactured on (date):

Approval mark

Sold by

(name of trading enterprise, stamp of store)

Date of sale

230V 50Hz

speed switch

knob

casing frame

casing

OFF

V23-1EN-02

Inhaltsverzeichnis

Andere Vents Lüfter Handbücher

Vents

Vents TwinFresh Easy Bedienungsanleitung

Vents

Vents TT PRO EC Bedienungsanleitung

Vents

Vents TwinFresh Comfo RA1-50 Bedienungsanleitung

Vents

Vents VKP SERIES Bedienungsanleitung

Vents

Vents TwinFresh Comfo RA1-25 Bedienungsanleitung

Vents

Vents 100 Quiet-dMEV DC Bedienungsanleitung

Vents

Vents VUT 300 E2V EC Bedienungsanleitung

Vents

Vents TwinFresh R-50 Bedienungsanleitung

Vents

Vents RO Series Bedienungsanleitung

Vents

Vents VKP mini Bedienungsanleitung

Vents

Vents Solo RA1-50-9 R V.2 Bedienungsanleitung

Vents

Vents Alta 100 Bedienungsanleitung

Vents

Vents PA 01 W Bedienungsanleitung

Vents

Vents KSB 100 Bedienungsanleitung

Vents

Vents KSB Bedienungsanleitung

Vents

Vents VPA100-1.8-1 Bedienungsanleitung

Vents

Vents TT Silent-M Series Bedienungsanleitung

Vents

Vents TT EC Bedienungsanleitung

Vents

Vents VUT 180 P5 EC Bedienungsanleitung

Vents

Vents 100 Base-I Bedienungsanleitung

Vents

Vents KSB EC Series Bedienungsanleitung

Vents

Vents D Bedienungsanleitung

Vents

Vents CBF 110 DC TH Bedienungsanleitung

Vents

Vents VKV EC Series Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung